{"product_id":"belaidis-judesio-jutiklis-zigbee-tuya-su-baterija","title":"Belaidis judesio jutiklis ZigBee TUYA, su baterija","description":"\u003ch2\u003eTrumpai apie prekę\u003c\/h2\u003e\u003cp\u003ePrekė: Belaidis judesio jutiklis ZigBee TUYA, su baterija. Kategorija: Jutikliai.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGamintojas:\u003c\/strong\u003e pcblab.io\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModelis:\u003c\/strong\u003e ZPS-Z1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eIt detects not only movement, but also the presence of a stationary person – even when you are sitting quietly at your desk, reading a book or napping on the couch.\u003c\/p\u003e\u003cp\u003e🔋 CR2450 battery\u003c\/p\u003e\u003cp\u003e📶 ZigBee 3.0\u003c\/p\u003e\u003cp\u003e📏 Range up to 5 m\u003c\/p\u003e\u003cp\u003e🌡 Light sensor (lux)\u003c\/p\u003e\u003cp\u003e🧲 Magnetic base\u003c\/p\u003e\u003cp\u003e\u003cb\u003e🎯 Classic Motion Sensor (PIR) problem\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTraditional PIR sensors only respond to \u003cb\u003eclear movement\u003c\/b\u003e. If you sit still – the light will go out, the ventilation will turn off, the alarm will go off. Frustrating, isn't it?\u003c\/p\u003e\u003cp\u003e\u003cb\u003e💡 Solution: 24 GHz\u003c\/b\u003e Microwave Radar\u003c\/p\u003e\u003cp\u003eThis sensor uses \u003cb\u003eDoppler radar technology\u003c\/b\u003e operating at a frequency of 24,125 GHz. It emits invisible microwave waves that bounce off objects in the room. By analyzing changes in the reflected signal, the sensor detects even the \u003cb\u003efinest micro-movements\u003c\/b\u003e – breathing, typing, turning pages. Thanks to this, he knows that someone is in the room, even when that person is sitting completely still.\u003c\/p\u003e\u003cp\u003e📡\u003cb\u003e24 GHz Doppler Radio\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eDetects micro-movements (breathing, writing) – not just a clear movement like a classic PIR.\u003c\/p\u003e\n\u003cp\u003e📏\u003cb\u003eRange up to 5 meters\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eConfigurable zones every 0,5 m. 110° detection angle – covers even a large room.\u003c\/p\u003e\n\u003cp\u003e🌡 \u003cb\u003eBuilt-in light sensor\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eMeasures illuminance (lux). Ideal for automation of the \"light up when dark\" type.\u003c\/p\u003e\n\u003cp\u003e🔋\u003cb\u003eBattery powered\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eCR2450 battery – no cables, installation anywhere thanks to magnetic base.\u003c\/p\u003e\n\u003cp\u003e📶\u003cb\u003e ZigBee 3.0\u003c\/b\u003e protocol\u003c\/p\u003e\n\u003cp\u003eLow power consumption, stable communication. Requires ZigBee gateway (e.g. Zemismart, TUYA).\u003c\/p\u003e\n\u003cp\u003e📱\u003cb\u003eTUYA \/ Smart Life\u003c\/b\u003e application\u003c\/p\u003e\n\u003cp\u003eFull control from your smartphone. Settings, logs, automation – all in one place.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e⚠ Platform compatibility\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e✅ TUYA Smart\u003c\/p\u003e\n\u003cp\u003e✅ Smart Life\u003c\/p\u003e\n\u003cp\u003e❌ Home Assistant – currently no support\u003c\/p\u003e\n\u003cp\u003eThe sensor works with \u003cb\u003eTUYA Smart\u003c\/b\u003e and \u003cb\u003eSmart Life\u003c\/b\u003e applications. Requires a ZigBee gateway compatible with TUYA (added separately). At the moment \u003cb\u003ethere is no official support for Home Assistant\u003c\/b\u003e.\u003c\/p\u003e\u003ch2\u003eSettings\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eAdjust the sensor to your room and needs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e📏 Radar range (0 to 5 m in sections every 0,5 m)\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eIn the application you can see a bar divided into \u003cb\u003e10 segments\u003c\/b\u003e (each 0,5 m). You can enable or disable any segment – e.g. block detection right next to the wall so that the sensor does not \"see\" through it. It is ideal for small rooms or when the sensor is close to the door to another room.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e🎚 Motion detection sensitivity\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThree presets: \u003cb\u003eHigh\u003c\/b\u003e, \u003cb\u003eAverage\u003c\/b\u003e, \u003cb\u003eLow\u003c\/b\u003e – and \u003cb\u003eCustom mode\u003c\/b\u003e, where you manually set the trigger threshold for each segment. In Custom view, you see an energy graph – blue bars show the current energy value in each zone, and the orange line is the threshold. When the energy exceeds the threshold, the sensor reports presence.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e⏱ Delay time \"no presence\"\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eYou set how many seconds after a person leaves the sensor will change the status to \"no presence\" (range: \u003cb\u003e0 to 60 seconds\u003c\/b\u003e). Shorter time = faster response, but beware – the radar needs a moment after a person leaves for the energy to drop (normal delay of 2 to 10 seconds).\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e💡 LED\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eYou can turn the LED flashing on or off on the sensor when it detects presence. Useful for debugging, but you can turn it off overnight.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e🔧 Automatic Threshold Setting\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eDon't want to manually set the thresholds? Click the \u003cb\u003e\"Automatic threshold setting\"\u003c\/b\u003e button in the sensitivity settings – the sensor will learn the optimal thresholds by analyzing the environment. Important: When automatically learning \u003cb\u003eno one should be within sensor range\u003c\/b\u003e.\u003c\/p\u003e\u003ch2\u003eAutomation\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eConnect the sensor with other devices in the TUYA\u003c\/b\u003e ecosystem\u003c\/p\u003e\u003cp\u003eThe sensor works with the TUYA automation system. You can create \u003cb\u003e\"If... then...\"\u003c\/b\u003e rules by combining the status of the sensor with any devices on your network.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e1.\u003c\/b\u003e \u003cb\u003eHow to create automation?\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eOpen the \"Smart\" tab in the TUYA\u003c\/b\u003e app\u003c\/li\u003e\n\u003cli\u003eSelect \"Automation\" → \"Add Automation\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e2. \u003c\/b\u003e \u003cb\u003eSet a trigger condition\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSelect the presence sensor as a trigger. You can react to: \u003cb\u003eSomeone\u003c\/b\u003e (someone is), \u003cb\u003eNo one\u003c\/b\u003e (nobody is there), \u003cb\u003echange of lighting intensity (lux)\u003c\/b\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e3. \u003c\/b\u003e \u003cb\u003eSelect action\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eE.g. Turn the light on\/off, start the air conditioning, send a notification to your phone, turn on the camera.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e4. \u003c\/b\u003e \u003cb\u003eAdd terms (optional)\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eE.g. \"only when it is dark (lux \u0026lt; 50)\" or \"only between 18:00 and 6:00\".\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003e💡 Examples of automation rules\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eRule 1:\u003c\/b\u003e When the sensor detects the presence AND intensity of light \u0026lt; 30 lux → Turn on the ceiling lamp.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eRule 2:\u003c\/b\u003e When the sensor reports \"no presence\" for 5 min → Turn off all lights and air conditioning.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eRule 3:\u003c\/b\u003e When the sensor detects presence after 23:00 → Turn on night LED lighting (10% brightness).\u003c\/p\u003e\u003cp\u003e\u003cb\u003e⚠ Automation not working?\u003c\/b\u003e \u003cb\u003eCheck out:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhether the sensor correctly registers presence (check the sensor logs in the application).\u003c\/li\u003e\n\u003cli\u003eWhether the rule logic is correct (appropriate condition + action).\u003c\/li\u003e\n\u003cli\u003eWhether the actuator (e.g. bulb) is online and connected to the gate.\u003c\/li\u003e\n\u003cli\u003eWhether the gateway firmware is up to date.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e ZPS-Z1\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWireless protocol:\u003c\/b\u003e ZigBee 3.0 (2,4 GHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRadar frequency:\u003c\/b\u003e 24,125 GHz (Doppler radar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDetection range:\u003c\/b\u003e up to 5 meters (configurable zones every 0,5 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDetection angle:\u003c\/b\u003e 110°\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLight sensor:\u003c\/b\u003e Yes – measurement of illuminance (lux)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower Supply:\u003c\/b\u003e CR2450 battery (included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorking temperature:\u003c\/b\u003e -10°C to +45°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAssembly:\u003c\/b\u003e Magnetic base (self-adhesive)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWater resistance:\u003c\/b\u003e None – the device is not waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility:\u003c\/b\u003e TUYA Smart, Smart Life (\u003cb\u003erequires ZigBee\u003c\/b\u003e gateway)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e📦 What will you find in the set?\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eZPS-Z1 presence sensor (spherical body)\u003c\/li\u003e\n\u003cli\u003eMagnetic base with self-adhesive tape\u003c\/li\u003e\n\u003cli\u003eCR2450 battery (installed, with \"PULL\" lock)\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExamples of applications\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eCheck how the sensor can make your daily life easier\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e🚿 Bathroom\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe light and fan turn on automatically when you enter. They will not go out when you sit still – the radar detects your presence. Once you leave, everything will turn off.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e💻 Office \/ Cabinet\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eDo you work at a desk? The light won’t go out even when you’re sitting still and writing. You will get up for a break – after a while the sensor will turn off unnecessary lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e🏠 Hallway \/ hall\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAutomatic lighting in the hallway – turns on when you pass, and goes out when you leave the zone. Energy saving and convenience.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e🚗 Garage\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eYou go into the garage – the light comes on. You can also set a notification on your phone when someone shows up in the garage at unusual times.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e🛋 Salon\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAutomatic air conditioning – turns on when someone is in the living room, turns off when everyone leaves. Energy saving without sacrificing comfort.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e👴 Care for the elderly\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eMonitor the presence of an elderly person in the room. Lack of movement for a long time? Get a push notification on your phone.\u003c\/p\u003e\u003ch2\u003eImportant Notes and Tips\u003c\/h2\u003e\u003cp\u003e\u003cb\u003e🔧 Assembly\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eMount the base on a clean, smooth surface. Hold it tight for at least 10 seconds. Wait OK. 10 minutes before you apply the sensor to the base (so that the glue sticks well). Point the sensor towards the area where people are staying. For people sitting – aim at the chest (breathing detection).\u003c\/p\u003e\u003cp\u003eAvoid mounting opposite fans, curtains – they can cause false alarms.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e📡 Cooperation with other radar devices\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe sensor can work with other radar devices in the same room (e.g. smart toilets, lamps with a sensor), but they can interfere with each other. Recommendation: \u003cb\u003edo not mount two sensors opposite each other\u003c\/b\u003e – better backwards to each other, at a distance.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e🔋 Battery – safety\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe sensor is powered by \u003cb\u003eCR2450\u003c\/b\u003e battery. To remove the battery, use a flat screwdriver and pry it from the negative pole side. When installing a new battery: insert the positive pole first, then press the negative one.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e⚠ NOTE:\u003c\/b\u003e Lozenge battery – keep out of reach of children! If swallowed, seek medical attention immediately.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGroup\u003c\/th\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003enew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eInvoice\u003c\/td\u003e\n\u003ctd\u003eWith a VAT invoice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eZigBee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003epcblab.io\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eManufacturer code\u003c\/td\u003e\n\u003ctd\u003eZPS-Z1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eEAN (GTIN)\u003c\/td\u003e\n\u003ctd\u003e5904741320708\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003ePackaging status\u003c\/td\u003e\n\u003ctd\u003eoriginal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"pcblabio","offers":[{"title":"Default Title","offer_id":54600563851611,"sku":"18542788950","price":62.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9355\/4523\/files\/Wireless-ZigBee-PRESENCE-Sensor-BATTERY-TUYA-Smart-Motion-Sensor.jpg?v=1793567604","url":"https:\/\/homy.lt\/lv\/products\/belaidis-judesio-jutiklis-zigbee-tuya-su-baterija","provider":"homy.lt","version":"1.0","type":"link"}