{"product_id":"diskiniu-pjuklu-galastuvas-widii-90-400-mm-230v-1100w-2-diskai","title":"Diskinių pjūklų galąstuvas WIDII, 90–400 mm, 230V, 1100W, 2 diskai","description":"\u003ch2\u003eTrumpai apie prekę\u003c\/h2\u003e\u003cp\u003ePrekė: Diskinių pjūklų galąstuvas WIDII, 90–400 mm, 230V, 1100W, 2 diskai. Kategorija: Įrankių galąstuvai.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGamintojas:\u003c\/strong\u003e no brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModelis:\u003c\/strong\u003e ksbs1100 by bavaria-tools\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRegularly used circular saws require sharpening. The Eurotec sharpener allows you to prepare for further work saws with spectral teeth and steel saws without spectra. It is a practical equipment of a carpentry workshop, where shields of various types and sizes are used.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eScope of saws 90 – 400 mm\u003c\/b\u003e – one sharpener supports discs of different diameters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e2 grinding discs included\u003c\/b\u003e – separate for saw blades and separate for saws without spectra\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEngine tilt angle adjustment\u003c\/b\u003e – allows you to set the sharpening unit to the saw being processed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConical clamping pressure\u003c\/b\u003e – helps to fix saws with holes of various sizes\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e5300 rpm\u003c\/b\u003e \u003cb\u003e\/min at idle\u003c\/b\u003e – drive operation parameter during station preparation\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower supply 230 V \/ 50 Hz\u003c\/b\u003e – connection to the workshop installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSanding disc with a diameter of 100 mm\u003c\/b\u003e – working element for sharpening saw teeth\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe set also includes operating keys and instructions. Thanks to this, the most important elements needed to prepare the sharpener are collected in one set.\u003c\/p\u003e\u003ch2\u003eSaw diameter from 90 to 400 mm\u003c\/h2\u003e\u003cp\u003eSharpener adopts circular saws with diameter from 90 to 400 mm. Such a wide range is useful in a workshop where various discs are selected for various jobs: smaller for more precise tasks, larger for cutting larger elements. No need to limit the sharpening station to one saw diameter.\u003c\/p\u003e\u003cp\u003eThe metal base creates space for the motor assembly and the attachment of the machined disc. The mounted saw remains available at the grinding disc, which allows you to prepare the setting according to its dimensions. Before starting work, it is worth choosing the location of the sharpener elements for a specific saw and checking its placement in the attachment.\u003c\/p\u003e\u003ch2\u003eOne station for saws and steel saws\u003c\/h2\u003e\u003cp\u003eEurotec ksbs1100 is designed for sharpening saws with spectral teeth, i.e. with sinters, and traditional steel saws without spectra. This is important when several types of discs are used in the workshop and each requires matching sharpening equipment.\u003c\/p\u003e\u003cp\u003eThe design combines a saw mount with a separate motor assembly. When preparing the tool for work, a grinding disc is selected for the type of sharpened saw, and then a sharpening unit is set. Such separation of activities helps to keep order when operating different discs: first the right accessory, then the right setting of the device.\u003c\/p\u003e\u003ch2\u003eTwo grinding discs with different applications\u003c\/h2\u003e\u003cp\u003eThe set includes two sharpening and grinding discs: one designed for spectral saws, the other for saws without spectra. Thanks to this, the equipment can be selected for the type of saw teeth instead of using the same accessory for both types. This is especially useful where steel saws also work alongside sinter discs.\u003c\/p\u003e\u003cp\u003eThe diameter of the grinding wheel is 100 mm. Before sharpening, select the disc appropriate for the saw being processed and mount it according to the instructions of the device. Separate accessories also facilitate the organization of work: after finishing sharpening one type of saws, you can prepare the sharpener for the next task by changing the grinding disc and settings.\u003c\/p\u003e\u003ch2\u003eSaw base and mount\u003c\/h2\u003e\u003cp\u003eThe saw is mounted on a separate fastening element at the sharpening unit. Its position relative to the grinding disc is important when preparing for sharpening, so the layout of the base, brackets and fastening should be treated as a whole. This allows you to position the machined disc at the working part of the device.\u003c\/p\u003e\u003cp\u003eWhen working with saws of different diameters, it is especially important to correctly fix each of them before starting the sharpener. The design gives access to the saw and setting elements, so you can prepare the station for a specific shield, instead of working with one fixed mounting position.\u003c\/p\u003e\u003ch2\u003eConical pressure for saws with different holes\u003c\/h2\u003e\u003cp\u003eConical pressure is used to fix the sharpened saw. Its shape helps to embed discs whose center holes differ in size. This is a useful solution in a workshop using saws of different brands and types, where the outer diameter itself is not the only difference between the discs.\u003c\/p\u003e\u003cp\u003eBefore sharpening, place the saw on the attachment and press it so that it is properly seated. Carefully prepared attachment then allows you to focus on setting the grinding unit relative to the teeth. Pressure is therefore an important element not only at the first assembly, but at every change of the machined saw.\u003c\/p\u003e\u003ch2\u003eBrackets and position of the sharpening unit\u003c\/h2\u003e\u003cp\u003eThe motor assembly is located on metal brackets mounted on the base of the sharpener. This arrangement separates the attachment point of the saw from the part driving the grinding disc. When preparing the station, it is easier to recognize which element is responsible for embedding the saw and which for setting the sharpening unit.\u003c\/p\u003e\u003cp\u003eWhen changing the type of saw or its diameter, it is worth checking the mutual position of these parts again. Sharpening begins with the preparation of the device for a specific disc: choosing the right grinding accessory, fixing the saw and setting the engine. This order of activities is practical especially when several different saws are operated in one session.\u003c\/p\u003e\u003ch2\u003eEngine tilt adjustment\u003c\/h2\u003e\u003cp\u003eThe sharpener allows you to adjust the tilt angle of the engine. This allows you to position the sharpening unit according to the saw you are working on. This is especially important when handling different types of discs: changing the saw may require not only selecting the right grinding disc, but also readjusting the tilt.\u003c\/p\u003e\u003cp\u003eAdjustment gives the possibility of preparing the device for the geometry of the saw. Instead of leaving the motor assembly in one position, you can adjust its angle when setting the sharpener. Before starting sharpening, check the setting of the assembly and the embedding of the saw so that both elements are prepared for joint work.\u003c\/p\u003e\u003ch2\u003eParameters useful for work planning\u003c\/h2\u003e\u003cp\u003eThe device is powered from a 230V\/50Hz mains, and the idle speed is 5300rpm. \/min. The grinding disc has a diameter of 100 mm. Together with the range of sharpened saws 90 to 400 mm, these are the basic data needed when choosing a sharpener for workshop equipment.\u003c\/p\u003e\u003cp\u003eThe weight of the device is about 5 kg. When organizing the workplace, it is worth providing him with a position where it will be possible to conveniently attach the saw, change accessories and set the tilt of the engine assembly. Below are the parameters and contents of the set to facilitate the comparison of the device with saws used in the workshop.\u003c\/p\u003e\u003ch2\u003eCover at the grinding disc\u003c\/h2\u003e\u003cp\u003eThe blue cover includes a grinding disc assembly. Next to it there are elements related to the setting of the saw at the working part of the device. This is an area that is worth paying special attention to when preparing the sharpener: the location of the saw and grinding unit must be selected before starting work.\u003c\/p\u003e\u003cp\u003eThe cover is part of the sharpener's design, and its position allows you to recognize the working area of the grinding disc. When replacing the dial or changing settings, follow the instruction manual. Thanks to this, you can perform subsequent actions – mounting the accessory, fixing the saw and setting the assembly – in an orderly order.\u003c\/p\u003e\u003ch2\u003eAccessories for the preparation of the sharpener\u003c\/h2\u003e\u003cp\u003eThe equipment includes grinding discs and operating keys. Among the elements of the set there are also parts of fastening and cover. After unfolding the accessories, it is easy to distinguish parts designed to work with the saw from tools used to operate the device.\u003c\/p\u003e\u003cp\u003eTwo grinding discs allow you to choose an accessory for a spectral or steel saw without spectra. The keys are useful when preparing the sharpener and maintenance activities provided in the instructions. It is worth storing the equipment together, especially if you often change the type of sharpened saw: the right shield and the necessary tools then remain at hand.\u003c\/p\u003e\u003ch2\u003eNetwork engine assembly and device designations\u003c\/h2\u003e\u003cp\u003eThe motor is mounted on an adjustable bracket, and there is a circuit breaker on its housing. This arrangement brings together the drive, control and tilt adjustment in one unit. When setting the sharpener, you can refer its position directly to the saw fixed on the other side of the device.\u003c\/p\u003e\u003cp\u003eThe mains power supply of 230 V \/ 50 Hz means that the sharpener can be planned as part of a workshop station with access to the appropriate socket. After completing the work, the settings can be changed to the next saw: choose a grinding disc, fix the machined disc and adjust the position of the engine assembly.\u003c\/p\u003e\u003ch2\u003eWhat distinguishes the Eurotec sharpener\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eScope 90 to 400 mm:\u003c\/b\u003e allows you to work with saws of different diameters on one device\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e2 types of saws:\u003c\/b\u003e supports spectral tooth discs and steel saws without spectral\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e2 grinding discs:\u003c\/b\u003e each has a separate purpose corresponding to the type of saw\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSanding disc 100 mm:\u003c\/b\u003e the known dimension of the working element facilitates the preparation of equipment\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e5300 rpm\u003c\/b\u003e \u003cb\u003e\/min:\u003c\/b\u003e specified idle speed makes it easier to compare sharpener parameters\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe biggest advantage of such a combination of solutions is the ability to prepare the device for the next, different saw. The grinding accessory changes, checks the disc mount and sets the engine tilt – without the need to limit the position to one type of saw.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType of device:\u003c\/b\u003e electric circular saw sharpener\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Eurotec\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer code:\u003c\/b\u003e ksbs1100\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCondition:\u003c\/b\u003e new\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower supply:\u003c\/b\u003e mains, 230 V \/ 50 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIdle speed:\u003c\/b\u003e 5300 rpm. \/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter of sharpened saws:\u003c\/b\u003e 90 – 400 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter of grinding wheel:\u003c\/b\u003e 100 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSupported saws:\u003c\/b\u003e with spectral teeth and steel without spectra\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e engine tilt angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAttachment of the saw:\u003c\/b\u003e conical pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e about 5 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEngine housing color:\u003c\/b\u003e blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEAN:\u003c\/b\u003e 5904826196914\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCustoms tariff code:\u003c\/b\u003e 82019000\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe set includes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1x Eurotec ksbs1100 circular saw sharpener\u003c\/li\u003e\n\u003cli\u003e1x grinding disc for saw blades\u003c\/li\u003e\n\u003cli\u003e1x grinding disc for saws without vision\u003c\/li\u003e\n\u003cli\u003e1x set of operating keys\u003c\/li\u003e\n\u003cli\u003e1x instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe set includes two sanding accessories for a separate purpose. Select them to the type of saw before starting sharpening, then prepare the attachment and setting of the motor assembly according to the instruction manual.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGroup\u003c\/th\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003enew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eInvoice\u003c\/td\u003e\n\u003ctd\u003eWith a VAT invoice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eno brand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eManufacturer code\u003c\/td\u003e\n\u003ctd\u003eksbs1100 by bavaria-tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eEAN (GTIN)\u003c\/td\u003e\n\u003ctd\u003e5904826196914\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"bavaria-tools","offers":[{"title":"Default Title","offer_id":54632960819547,"sku":"18961014399","price":112.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9355\/4523\/files\/Sharpener-for-circular-saws-90-400mm-230V-2-discs-1100W-WIDII.jpg?v=1793796455","url":"https:\/\/homy.lt\/lv\/products\/diskiniu-pjuklu-galastuvas-widii-90-400-mm-230v-1100w-2-diskai","provider":"homy.lt","version":"1.0","type":"link"}