{"product_id":"elektros-laidu-komplektas-200-cm-13-kontaktu-universalus-dgh","title":"Elektros laidų komplektas 200 cm, 13 kontaktų, universalus, DGH","description":"\u003ch2\u003eTrumpai apie prekę\u003c\/h2\u003e\u003cp\u003ePrekė: Elektros laidų komplektas 200 cm, 13 kontaktų, universalus, DGH. Kategorija: Laidai ir lizdai.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eGamintojas:\u003c\/strong\u003e DGH\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eComplete universal electrical harness of towing hook with 13-pin socket DGH SYSTEM\u003c\/h2\u003e\u003ch2\u003eContents of the set\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBeam:\u003c\/b\u003e 1 × bundle with wires 200 cm long\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSocket:\u003c\/b\u003e 1 × trailer socket in 13-pin standard (ISO 11446)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeal:\u003c\/b\u003e 1 × gasket under the socket, protecting against moisture ingress\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eQuick couplers:\u003c\/b\u003e 13 × terminal blocks for quick connection of wires\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e Bolts and nuts:\u003c\/b\u003e 3 × bolts with nuts to attach the socket\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamp bands:\u003c\/b\u003e 3 × clamp bands for attaching the beam\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOther:\u003c\/b\u003e 1 x Multilingual Assembly Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eNote on\u003c\/b\u003e \u003cb\u003epower cables:\u003c\/b\u003e Installation requires retrofitting on your own in: fuses (separate for pin 9 and 10, with battery) and charging control system – VSR relay \/ separator or DC-DC charger.\u003c\/p\u003e\u003ch2\u003eProduct characteristics\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eComplete 13-pin harness (ISO 11446)\u003c\/b\u003e\u003cp\u003eReady-to-install electrical installation for cargo trailers with a GVW of more than 750 kg and caravans, tow trucks and bicycle racks equipped with a reversing light. For caravans, the harness supports a fixed plus and battery charging circuit, allowing you to power your on-board devices while stationary or driving.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFactory connected wires to the socket\u003c\/b\u003e\u003cp\u003eAll wires are already attached to the appropriate socket pins, which greatly facilitates installation and reduces its time.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIncreased cross-sections of power cables\u003c\/b\u003e\u003cp\u003eThe harness equipped with four thicker wires (4 × 1,5 mm²) for constant power (pin 9), charging (pin 10) and mass (pins 11 and 13) circuits ensures reliable power supply to devices in the trailer.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSupport for reversing light\u003c\/b\u003e\u003cp\u003eFully compatible with the 13-pin standard, allows you to connect the reversing light and additional functions, not available in the 7-pin version.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDivision of the beam into two sides + power supply\u003c\/b\u003e\u003cp\u003eThe cables are conducted in three separate covers – left and right side of the vehicle and power cables:\u003c\/p\u003e\n\u003cp\u003eLeft: left direction indicator, left position, fog, stop light,\u003c\/p\u003e\n\u003cp\u003eRight: right direction indicator, right position, reverse light, mass\u003c\/p\u003e\n\u003cp\u003ePower cables: constant plus, charging and two masses\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIndividually insulated wires\u003c\/b\u003e\u003cp\u003eEach cable has its own insulation made of flexible PVC, resistant to abrasion, moisture and temperature fluctuations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProtective covers (feeds)\u003c\/b\u003e\u003cp\u003eSeparate cables protect the wires from mechanical damage and facilitate their handling.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e13-pin socket with gasket\u003c\/b\u003e\u003cp\u003eSolid socket in 13-pin standard (ISO 11446), made of durable weather-resistant plastic, with a gasket under the socket protecting against moisture ingress.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eQuick couplers for wires\u003c\/b\u003e\u003cp\u003eThe set includes 13 quick couplers for safe and quick connection of the harness to the electrical system of the car.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAssembly kit\u003c\/b\u003e\u003cp\u003eThe set includes screws with nuts for fixing the socket and 3 clamps for attaching the harness to the body or factory wires of the vehicle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAssembly instructions\u003c\/b\u003e\u003cp\u003eMultilingual manual containing illustrations and detailed distribution of pins, functions and colors of wires.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eResistance to external conditions\u003c\/b\u003e\u003cp\u003eThe materials used in the beam ensure a long service life in road conditions – resistance to water, salt, dirt and variable temperatures.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBrief description\u003c\/h2\u003e\u003cp\u003eThe 13-pin electrical harness is designed to connect the lighting system and trailer power supply circuits to the vehicle's electrical system. The kit includes a complete bundle with wires of 200 cm length, terminated with a trailer socket in 13-pin standard (ISO 11446).\u003c\/p\u003e\u003cp\u003eEach cable has individual insulation, and the whole is divided into three separate sections in protective pellets, which facilitates installation and cleaning of cables.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eThe left side supports\u003c\/b\u003e: left direction indicator, left position light, fog light and stop light.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eThe right side includes\u003c\/b\u003e: right direction indicator, right position light, reversing light and mass.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eThe power section contains\u003c\/b\u003e wires for a constant plus, charging the trailer battery and additional masses, made in an increased cross-section of 1,5 mm² to ensure a stable current flow.\u003c\/p\u003e\u003ch2\u003eWire Fastening\u003c\/h2\u003e\u003cp\u003eAn additional advantage is that the wires are already factory attached to the socket, which significantly reduces the assembly time and eliminates the risk of misconnection of pins. Thanks to this, the installation is quick, intuitive and does not require specialized tools. The kit is complemented by quick couplers, mounting hardware, and clamp ties, which allow for safe and aesthetically pleasing beam guidance in your vehicle.\u003c\/p\u003e\u003ch2\u003eApplication in vehicles\u003c\/h2\u003e\u003cp\u003eThe electrical harness without module is designed for vehicles where it is possible to directly connect the trailer installation to the factory lighting system of the car. This solution works well in older vehicles, not equipped with a CAN bus and electronic light control modules monitoring the load on bulb circuits.\u003c\/p\u003e\u003ch2\u003ePurpose of 13-pin beam\u003c\/h2\u003e\u003cp\u003eThe 13-pin harness is used to handle full lighting and power of car trailers, including cargo trailers with a permissible gross weight of over 750 kg, tow trucks, bicycle racks and caravans. The 13-pin standard (ISO 11446) provides extended functionality compared to the 7-pin version – it supports a reversing light, a fixed plus and a battery charging circuit in the trailer.\u003c\/p\u003e\u003ch2\u003eConstruction and construction\u003c\/h2\u003e\u003cp\u003eThe beam consists of twelve copper conductors, individually insulated with a colored PVC sheath. Each of the three sections of the beam – left, right and power – is conducted in a separate protective cover (peszel), protecting the wires from mechanical damage, dirt and moisture. The use of triple cable routing (left\/right\/power supply) facilitates installation and allows for aesthetic adjustment to the vehicle structure.\u003c\/p\u003e\u003ch2\u003e13-pin socket (ISO 11446)\u003c\/h2\u003e\u003cp\u003eMade of weather-resistant plastic, it provides a secure electrical connection to the trailer plug and protects the contacts from corrosion and moisture. The socket is accompanied by a gasket under the socket, which additionally secures the connection from the body side. The 13-pin standard allows you to provide full lighting (including reversing lights) and power circuits. The socket provides lighting support:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eleft direction indicator\u003c\/li\u003e\n\u003cli\u003eright direction indicator\u003c\/li\u003e\n\u003cli\u003eleft position lamp\u003c\/li\u003e\n\u003cli\u003eright position lamp\u003c\/li\u003e\n\u003cli\u003estop light\u003c\/li\u003e\n\u003cli\u003efog light\u003c\/li\u003e\n\u003cli\u003ereversing lamp\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuick couplers – easy and safe installation\u003c\/h2\u003e\n\u003cp\u003eThe use of quick couplers (clamp connectors) enables quick, durable and safe connection of wiring harnesses to the electrical system of the vehicle – without the need for soldering, stripping insulation or cutting wires.\u003c\/p\u003e\n\u003cp\u003eInstallation is extremely simple and does not require specialized tools. This solution ensures a stable electrical contact, protects the connection from loosening and significantly reduces the installation time of the entire beam. In addition, quick couplers allow you to perform the installation without permanent interference with the original wiring harness, making the installation aesthetically pleasing, reversible and safe.\u003c\/p\u003e\u003ch2\u003eAssembly instructions\u003c\/h2\u003e\u003cp\u003eThe set comes with multilingual assembly instructions with illustrations and a clear description of the pins, functions, and colors of the wires.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAssembly instructions\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDo not run wires near the silencer\/exhaust system or suspension components.\u003c\/li\u003e\n\u003cli\u003eIn places where you go through the sheet metal, use edge protection (e.g. rubber grommet).\u003c\/li\u003e\n\u003cli\u003eAfter installation, perform a visual inspection of whether the cables are not stretched and whether the bands do not crush the wires.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eAction control\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCheck all lighting functions with connected trailer or 13-pin tester: turn signals, positions, STOP, fog, reversing, fixed plus and charging circuit (if connected).\u003c\/li\u003e\n\u003cli\u003eMake sure the socket is stable, the gasket adheres well, and the bundle is securely fixed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCorporate blister packaging\u003c\/h2\u003e\u003cp\u003eThe whole set was placed in an aesthetic, company packaging – tightly welded and profiled blister with a euro hole, allowing convenient hanging of the product at the store display. The packaging ensures that the contents are protected during transport and storage, while also presenting the product in a clear and professional manner.\u003c\/p\u003e\u003ch2\u003eDGH SYSTEM™ – Quality, safety, convenience\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eDGH SYSTEM™\u003c\/b\u003e is a brand that focuses on functionality, reliability and modern design, creating car accessories that facilitate everyday travel and active lifestyle. Thanks to precise workmanship, durable materials and attention to detail, our products guarantee reliability, comfort and complete safety on every route.\u003c\/p\u003e\u003cp\u003eOur solutions are intuitive to use, easy to install and adapted to the real needs of drivers, so that you can enjoy the freedom of travel without unnecessary complications.\u003c\/p\u003e\u003cp\u003eAt \u003cb\u003eDGH SYSTEM™, we believe that travel matters\u003c\/b\u003e. That’s why we create equipment that gives you complete freedom, intuitive operation and safety – wherever you go.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGroup\u003c\/th\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003enew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eInvoice\u003c\/td\u003e\n\u003ctd\u003eWith a VAT invoice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eKind\u003c\/td\u003e\n\u003ctd\u003e13 PIN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eProduct weight with unit packaging\u003c\/td\u003e\n\u003ctd\u003e0.62 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eEAN (GTIN)\u003c\/td\u003e\n\u003ctd\u003e5907661990020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eDGH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003ePackaging status\u003c\/td\u003e\n\u003ctd\u003eoriginal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"dghsystem_com","offers":[{"title":"Default Title","offer_id":54113473659227,"sku":"18259478687","price":29.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9355\/4523\/files\/HARNESS-200cm-ELECTRIC-FOR-TOWING-HOOK-SOCKET-13PIN-UNIVERSAL-DGH.jpg?v=1789740270","url":"https:\/\/homy.lt\/lv\/products\/elektros-laidu-komplektas-200-cm-13-kontaktu-universalus-dgh","provider":"homy.lt","version":"1.0","type":"link"}