{"product_id":"inverterinis-suvirinimo-aparatas-sherman-digitig-212-cold-spot","title":"Inverterinis suvirinimo aparatas Sherman DIGITIG 212 COLD SPOT","description":"\u003ch2\u003eTrumpai apie prekę\u003c\/h2\u003e\u003cp\u003ePrekė: Inverterinis suvirinimo aparatas Sherman DIGITIG 212 COLD SPOT. Kategorija: Invertoriniai suvirinimo aparatai.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGamintojas:\u003c\/strong\u003e Sherman\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModelis:\u003c\/strong\u003e 7812679\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSHERMAN DIGITIG 212 COLD\u003c\/h2\u003e\u003cp\u003e| Brand: \u003cb\u003eSHERMAN |\u003c\/b\u003e Welding methods: \u003cb\u003eTIG COLD\u003c\/b\u003e, \u003cb\u003eTIG DC, MMA\u003c\/b\u003e\u003cb\u003e | \u003c\/b\u003ePower supply: \u003cb\u003e230V | \u003c\/b\u003eWelding current: \u003cb\u003e200A | \u003c\/b\u003eEfficiency: \u003cb\u003e60% |\u003c\/b\u003e\u003c\/p\u003e\u003ch2\u003eSTANDARD EQUIPMENT\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSherman DIGITIG 212 COLD \u003cb\u003ewelding machine\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWelding torch\u003c\/b\u003e T-17\/4m\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eElectrode cable\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eMass cable\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eOperating instructions\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eGuarantee card\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOther accessories needed for full operation of the welding machine such as:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cb\u003egas cylinder\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003ereducer\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003ewelding wires\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003evisor\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003egloves\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eWelding torch spare parts\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eYou can find us at \u003cb\u003eother auctions\u003c\/b\u003e or a welding machine in a set with the given accessories.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eThe DIGITIG 212 COLD\u003c\/b\u003e digital welding machine is the latest generation of machines for professional use. It is made in \u003cb\u003eIGBT\u003c\/b\u003e technology and equipped with digital control.\u003c\/p\u003e\u003cp\u003eIt is used for manual DC welding using the \u003cb\u003eTIG\u003c\/b\u003e method of steel and non-ferrous metals. The device is equipped with the option of welding using the \u003cb\u003eMMA\u003c\/b\u003e method (wrapped electrode).\u003c\/p\u003e\u003cp\u003eThe device enables full \u003cb\u003edigital adjustment\u003c\/b\u003e and \u003cb\u003econtrol\u003c\/b\u003e of welding parameters of arc characteristics.\u003c\/p\u003e\u003cp\u003eIt is equipped with a \u003cb\u003ecold welding function\u003c\/b\u003e enabling the bonding of thin elements, thanks to very low heat emission in the joining zone.\u003c\/p\u003e\u003cp\u003eIn addition, it has \u003cb\u003eHF\u003c\/b\u003e, \u003cb\u003eHOT START\u003c\/b\u003e and \u003cb\u003eARC FORCE\u003c\/b\u003e functions, \u003cb\u003e2T\/4T\u003c\/b\u003e switch and display indicating welding current.\u003c\/p\u003e\u003cp\u003eIt is widely used in both \u003cb\u003e production and service works.\u003c\/b\u003e The device is characterized by \u003cb\u003eexcellent welding properties\u003c\/b\u003e , especially recommended for \u003cb\u003ehome and professional\u003c\/b\u003e users.\u003c\/p\u003e\u003ch2\u003eTECHNICAL DATA:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCatalog number:\u003c\/b\u003e 7812679\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower supply voltage [V]:\u003c\/b\u003e AC 230 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWelding methods:\u003c\/b\u003e TIG DC, MMA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExecution technology:\u003c\/b\u003e IGBT\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWelding current [A]:\u003c\/b\u003e MMA:180, TIG:200\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorking cycle [%]:\u003c\/b\u003e 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage in foreign state.\u003c\/b\u003e \u003cb\u003e[V]:\u003c\/b\u003e 67\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax.\u003c\/b\u003e \u003cb\u003epower consumption [A]:\u003c\/b\u003e MMA: 38, TIG: 26\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax.\u003c\/b\u003e \u003cb\u003epower consumption [kVA]:\u003c\/b\u003e MMA: 7,2, TIG: 5,3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWelding Current Adjustment:\u003c\/b\u003e Liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGas flow [s]:\u003c\/b\u003e 0-15\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower drop [s]:\u003c\/b\u003e 0-15\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eARC FORCE [A]:\u003c\/b\u003e 0-100\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMass [kg]:\u003c\/b\u003e 7,3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDimensions (D x SZ x W) [mm]:\u003c\/b\u003e 430 x 170 ×310\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIGBT TECHNOLOGY\u003c\/h2\u003e\u003cp\u003eThe basis for the construction of the electrical energy conversion system of the welding machine are electronic systems made in \u003cb\u003eIGBT\u003c\/b\u003e technology enabling operation in the frequency range above \u003cb\u003e200 kHz.\u003c\/b\u003e\u003c\/p\u003e\u003ch2\u003eDEGREE OF PROTECTION\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eIP determines\u003c\/b\u003e the extent to which a device is resistant to the ingress of solid and water contaminants. \u003cb\u003eIP23S\u003c\/b\u003e means that the device is adapted to work indoors and outdoors.\u003c\/p\u003e\u003ch2\u003eWORK CYCLE\u003c\/h2\u003e\u003cp\u003eThe work cycle is based on a 10-minute period. The \u003cb\u003e60%\u003c\/b\u003e duty cycle means that after \u003cb\u003e6 minutes\u003c\/b\u003e \u003cb\u003ework\u003c\/b\u003e of the device, a \u003cb\u003e4-minute break\u003c\/b\u003e is required. The 100% duty cycle means that the device can work continuously, without interruptions.\u003c\/p\u003e\u003ch2\u003ePROTECTION AGAINST OVERHEATING\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eThe power source is equipped with thermal\u003c\/b\u003e, automatic \u003cb\u003eoverload switch\u003c\/b\u003e. When the temperature of the welding machine is too high, the protection will disconnect the welding current and the overheating indicator diode will light up. After the temperature drops, the circuit breaker will automatically reset.\u003c\/p\u003e\u003ch2\u003eMMA\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eThe method by which the wrapped electrode\u003c\/b\u003e is used, consisting of a metal core covered with a sheath. The welder feeds the electrode as it melts into the welded object so as to maintain a fixed-length arc.\u003c\/p\u003e\u003ch2\u003eARC FORCE\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eIncreasing or decreasing the length of the welding arc\u003c\/b\u003e depending on the distance of the electrode from the material being welded. Allows you to adjust the dynamics of the welding arc. Shortening the arc length is accompanied by an increase in welding current, which results in \u003cb\u003estabilisation of the arc\u003c\/b\u003e.\u003c\/p\u003e\u003ch2\u003eHOT START\u003c\/h2\u003e\u003cp\u003eThe function is designed to prevent \u003cb\u003esticking the electrode to the material\u003c\/b\u003e and is a great convenience when arcing. It works at the moment of arcing, causing a temporary increase in the welding current above the value set by the welder.\u003c\/p\u003e\u003ch2\u003eHF - NON-CONTACT ARC IGNITION\u003c\/h2\u003e\u003cp\u003eThe device is equipped with an ionizer enabling \u003cb\u003econtactless arc ignition\u003c\/b\u003e.\u003c\/p\u003e\u003ch2\u003e2T\/4T OPERATING MODE\u003c\/h2\u003e\u003cp\u003e\u003cb\u003e2T - \u003c\/b\u003e pressing the button in the handle of the handle turns on the ionizer and lights up the arc. Welding is carried out with the button pressed.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e4T -\u003c\/b\u003e pressing the button in the handle of the handle will turn on the ionizer and light up the arc then release the button and conduct welding with the button released. Pressing the button again will finish welding\u003c\/p\u003e\u003ch2\u003eTIG DC HF\u003c\/h2\u003e\u003cp\u003eIn order to completely \u003cb\u003eeliminate the possibility of contamination\u003c\/b\u003e of the tungsten weld, it is recommended that the electrode does not touch the welded element; for this purpose, contactless arc ignition is used using high-frequency discharges generated by the built-in ionizer.\u003c\/p\u003e\u003ch2\u003eINITIAL CURRENT\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eCurrent appearing in the circuit after pressing the\u003c\/b\u003e button in the handle. The higher the initial current, the easier it is to light the arc.\u003c\/p\u003e\u003cp\u003eHowever, when welding thin sheets, too high an initial current value can lead to sheet metal burning. In some welding modes, the current does not increase to heat the welded element.\u003c\/p\u003e\u003ch2\u003eTIME OF CURRENT DROP\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eWelding current drop time\u003c\/b\u003e from set to zero or crater current value.\u003c\/p\u003e\u003ch2\u003eGAS OUTFLOW TIME\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eTime from arc extinction to gas valve closure.\u003c\/b\u003e to shield the solidifying welding lake from air and to cool the tungsten electrode. Too short outflow time can result in oxidation of the weld.\u003c\/p\u003e\u003ch2\u003eCOLD TIG\u003c\/h2\u003e\u003cp\u003e\u003cb\u003ePoint variety of TIG\u003c\/b\u003e welding – so-called. cold welding for bonding thin elements, thanks to very low heat emission in the joining zone. It consists in cyclic short-term ignition and extinction of the arch.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSPOT\u003c\/b\u003e Pressing the switch in the handle of the handle will turn on the ionizer, light the arc for the time set by the COLD TIME parameter and extinguish the arc. Re-ignition of the arch requires releasing and pressing the button in the handle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCPOT\u003c\/b\u003e Welding occurs in continuous mode, pressing the button in the handle will start cyclic arcing and extinguishing, releasing the button will finish welding. The arc glow time is regulated by the COLD TIME parameter, the expiration time by the COLD PAUSE parameter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCOLD TIME 0.01 - 2 sec.\u003c\/h2\u003e\u003cp\u003eWelding time during spot welding (\u003cb\u003ecold welding\u003c\/b\u003e).\u003c\/p\u003e\u003ch2\u003ePAUSE TIME 0.2 - 5 sec\u003c\/h2\u003e\u003cp\u003eInterruption time during spot welding (\u003cb\u003ecold welding\u003c\/b\u003e). Only for CPOT control mode.\u003c\/p\u003e\u003ch2\u003eEASY-TO-USE, EASY-TO-READ CONTROL PANEL:\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eEasy\u003c\/b\u003e to use control panel allows precise and smooth adjustment of parameters. \u003cb\u003eDigital display\u003c\/b\u003e indicates the actual current during welding. The semi-automatic welding machine has a menu that facilitates operation and allows you to choose the type of welded material.\u003c\/p\u003e\u003ch2\u003eSTRONG AND ROBUST CONSTRUCTION\u003c\/h2\u003e\u003cp\u003eThe housing of the device is made of \u003cb\u003elight\u003c\/b\u003e and \u003cb\u003edurable \u003c\/b\u003ecomposites, resistant to all kinds of mechanical damage.\u003c\/p\u003e\u003ch2\u003eEASY TRANSPORT\u003c\/h2\u003e\u003cp\u003eEquipping the welding machine with a\u003cb\u003e transport handle\u003c\/b\u003e for convenience when changing jobs.\u003c\/p\u003e\u003ch2\u003eCOOLING\u003c\/h2\u003e\u003cp\u003eThe device has a cooling system with a \u003cb\u003efan\u003c\/b\u003e which significantly increases its \u003cb\u003eefficiency\u003c\/b\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGroup\u003c\/th\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003enew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eInvoice\u003c\/td\u003e\n\u003ctd\u003eWith VAT invoice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSherman\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003e7.2 kVA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eSupply voltage (V)\u003c\/td\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eDuty cycle time\u003c\/td\u003e\n\u003ctd\u003e60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eDevice weight\u003c\/td\u003e\n\u003ctd\u003e7.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWelding range\u003c\/td\u003e\n\u003ctd\u003e10–200 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eManufacturer code\u003c\/td\u003e\n\u003ctd\u003e7812679\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eEAN (GTIN)\u003c\/td\u003e\n\u003ctd\u003e5903686617829\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003ePackaging status\u003c\/td\u003e\n\u003ctd\u003eoriginal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWelding methods\u003c\/td\u003e\n\u003ctd\u003eMMA,TIG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eAdditional features\u003c\/td\u003e\n\u003ctd\u003einfinitely adjustable welding current,EURO handle,LCD display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"www_spawarena_pl","offers":[{"title":"Default Title","offer_id":53212936307035,"sku":"12677855722","price":250.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9355\/4523\/files\/Sherman-DIGITIG-212-COLD-SPOT-inverter-welder.jpg?v=1780308602","url":"https:\/\/homy.lt\/products\/inverterinis-suvirinimo-aparatas-sherman-digitig-212-cold-spot","provider":"homy.lt","version":"1.0","type":"link"}