{"product_id":"panardinamasis-vandens-siurblys-suliniui-550w","title":"Panardinamasis vandens siurblys šuliniui, 550W","description":"\u003ch2\u003eTrumpai apie prekę\u003c\/h2\u003e\u003cp\u003ePrekė: Panardinamasis vandens siurblys šuliniui, 550W. Kategorija: Siurbliai ir hidroforai.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGamintojas:\u003c\/strong\u003e Verke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModelis:\u003c\/strong\u003e GŁĘBINÓWKA V60051 1''\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eEfficient screw submersible pump VERKE V60051\u003c\/b\u003e designed for pumping \u003cb\u003eclean and cold water\u003c\/b\u003e from wells. Thanks to the power of \u003cb\u003e550 W\u003c\/b\u003e, the capacity of \u003cb\u003e1800 l\/h\u003c\/b\u003e and the lifting height of up to \u003cb\u003e50 m\u003c\/b\u003e, this model will work both in households and during work related to \u003cb\u003eirrigation of farms\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eThe pump has been adapted to work in wells with a minimum hole diameter of \u003cb\u003e110 mm\u003c\/b\u003e. Screw construction and connector with a diameter of \u003cb\u003e1\"\u003c\/b\u003e allow the device to be used as part of the installation used for collecting and pumping water. The standard \u003cb\u003e230 V \/ 50 Hz\u003c\/b\u003e power supply allows the pump to be used in a typical electrical system.\u003c\/p\u003e\n\u003cp\u003eModel V60051 is designed for pumping water containing not more than \u003cb\u003e150 g\/m³ grinding solids\u003c\/b\u003e, and the temperature of the pumped medium can be up to \u003cb\u003e+40°C\u003c\/b\u003e. It is a practical solution for users looking for a submersible pump for regular use on the farm or during irrigation.\u003c\/p\u003e\u003cp\u003e► \u003cb\u003ePower supply voltage:\u003c\/b\u003e 230 V \/ 50 Hz\u003c\/p\u003e\u003cp\u003e► \u003cb\u003ePower:\u003c\/b\u003e 550 W\u003c\/p\u003e\u003cp\u003e► \u003cb\u003ePerformance:\u003c\/b\u003e 1800 l\/h\u003c\/p\u003e\u003cp\u003e► \u003cb\u003eLifting height:\u003c\/b\u003e 50 m\u003c\/p\u003e\u003cp\u003e► \u003cb\u003eMinimum diameter of source opening:\u003c\/b\u003e 110 mm\u003c\/p\u003e\u003cp\u003e► \u003cb\u003eDiameter of the stub:\u003c\/b\u003e 1\"\u003c\/p\u003e\u003cp\u003e► \u003cb\u003ePump type:\u003c\/b\u003e screw, deep-sea\u003c\/p\u003e\u003cp\u003e► \u003cb\u003ePurpose:\u003c\/b\u003e clean and cold water\u003c\/p\u003e\u003cp\u003e► \u003cb\u003eMaximum medium temperature:\u003c\/b\u003e +40°C\u003c\/p\u003e\u003cp\u003e► \u003cb\u003eAdmissible content of grinding solids:\u003c\/b\u003e max. 150 g\/m³\u003c\/p\u003e\u003cp\u003e\u003cb\u003e► Power 550 W\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe pump is equipped with a \u003cb\u003eengine with a power of 550 W\u003c\/b\u003e, ensuring appropriate parameters during water pumping. The design is designed to work with clean and cold water.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e► Capacity 1800 l\/h\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe capacity of \u003cb\u003e1800 litres per hour\u003c\/b\u003e allows for efficient pumping of water from the well into the installation. This parameter will work both during the current water intake and during irrigation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e► Lifting height 50 m\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe pump offers a \u003cb\u003elift height of up to 50 meters\u003c\/b\u003e, so it can be used in installations requiring water pumping to a significant height.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e► Screw construction\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe V60051 uses a \u003cb\u003escrew construction\u003c\/b\u003e, designed to work in wells with a minimum hole diameter of \u003cb\u003e110 mm\u003c\/b\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e► Universal application\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe pump can be used for \u003cb\u003ewater supply\u003c\/b\u003e of farms and for irrigation work. Its parameters allow for wide use in water installations.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e► For clean and cold water\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe device is designed for pumping \u003cb\u003eclean and cold water\u003c\/b\u003e, containing not more than \u003cb\u003e150 g\/m³ grinding solids\u003c\/b\u003e. The maximum temperature of the pumped medium is \u003cb\u003e+40°C\u003c\/b\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e► Connection 1\"\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe pump has a \u003cb\u003econnector with a diameter of 1 inch\u003c\/b\u003e, which allows you to use a properly selected discharge pipe and easily adjust the device to the installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e► Power supply 230 V\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe standard \u003cb\u003e230 V \/ 50 Hz\u003c\/b\u003e power supply means that the pump can work with a typical electrical system.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e► Household\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe pump can be used for \u003cb\u003ewater collection and pumping from well\u003c\/b\u003e, being part of the installation used to supply the farm with water.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e► Irrigation\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThanks to the capacity of \u003cb\u003e1800 l\/h\u003c\/b\u003e, the device can be used for work related to \u003cb\u003eirrigation of agricultural areas\u003c\/b\u003e and other installations using water from wells.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e► Wells of appropriate diameter\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe pump is designed for sources with a minimum hole diameter of \u003cb\u003e110 mm\u003c\/b\u003e, so before installation, make sure that the well provides adequate space for the device.\u003c\/p\u003e\n\u003cp\u003eThe heart of the device is an electric motor with a power of \u003cb\u003e550 W\u003c\/b\u003e, which ensures appropriate operating parameters during water pumping. This is the power selected for the pump design, enabling achieving a capacity of \u003cb\u003e1800 l\/h\u003c\/b\u003e and a lifting height of up to \u003cb\u003e50 meters\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eThe pump reaches \u003cb\u003eefficiency up to 1800 l\/h\u003c\/b\u003e, so it can efficiently pump water from the well to the installation. This parameter allows you to use the device both for current water intake and for work related to \u003cb\u003eirrigation of farms\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eThe maximum \u003cb\u003elift height is 50 meters\u003c\/b\u003e, which is one of the key advantages of this model. Thanks to this, the pump can be used in installations where water must be pumped from the well to significant heights. This parameter should be taken into account when designing the installation and selecting other elements of the system.\u003c\/p\u003e\u003cp\u003eThe pump has a 1\" diameter \u003cb\u003econnector, which determines the size of the connection on the discharge side. This allows you to choose the right cable and elements of installations cooperating with the pump. Before installation, adjust the accessories to the dimension \u003cb\u003e1 inch\u003c\/b\u003e and the parameters of the entire installation.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe pump has been adapted to pump medium with a maximum temperature of \u003cb\u003e+40°C\u003c\/b\u003e. Thanks to this, it can be used in installations where the temperature of the pumped water is within the range specified by the manufacturer. This is an important parameter when planning the use of the device and allows you to correctly select the pump for the conditions prevailing in a specific installation.\u003c\/p\u003e\u003cp\u003eThe pump can work with water containing up to \u003cb\u003e150 g\/m³ grinding solids\u003c\/b\u003e. This parameter determines the permissible level of such impurities in the pumped medium and allows you to properly select the device for the conditions prevailing in the well. This makes it easier for the user to assess whether \u003cb\u003eVERKE V60051\u003c\/b\u003e will be suitable for a specific water source.\u003c\/p\u003e\u003cp\u003eThe pump is designed for installation in water sources where the \u003cb\u003e hole diameter is at least 110 mm\u003c\/b\u003e. This allows you to precisely determine the requirements for the installation site even before the purchase and installation of the device. It is worth checking the diameter of the well to provide the pump with adequate space for proper placement and operation.\u003c\/p\u003e\u003cp\u003eThe pump uses a \u003cb\u003estandard power supply of 230 V \/ 50 Hz\u003c\/b\u003e, so that its electrical parameters are adapted to a typical electrical system. This solution facilitates the use of the device in the household and in installations used for collecting and pumping water from wells.\u003c\/p\u003e\u003cp\u003eThe \u003cb\u003edeep\u003c\/b\u003e design allows the device to be placed directly in a well or other suitable water source. This solution allows you to draw water from deeper places and pump it into the installation using a cable connected to the \u003cb\u003estrand 1\"\u003c\/b\u003e. The VERKE V60051 is therefore designed for installations where it is necessary to effectively draw water below ground level.\u003c\/p\u003e\u003cp\u003eVERKE V60051 has been designed as a device for \u003cb\u003etaking and pumping water from wells\u003c\/b\u003e, thanks to which it can be a practical element of the water system. The combination of a submersible design, \u003cb\u003epower of 550 W\u003c\/b\u003e, capacity of \u003cb\u003e1800 l\/h\u003c\/b\u003e and lifting height up to \u003cb\u003e50 m\u003c\/b\u003e allows the pump to be used in installations designed for regular water transport.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGroup\u003c\/th\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003enew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eInvoice\u003c\/td\u003e\n\u003ctd\u003eWith a VAT invoice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eVerke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003ePump type\u003c\/td\u003e\n\u003ctd\u003ewell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eEngine power\u003c\/td\u003e\n\u003ctd\u003e550 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eProduct weight with unit packaging\u003c\/td\u003e\n\u003ctd\u003e9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eManufacturer code\u003c\/td\u003e\n\u003ctd\u003eGŁĘBINÓWKA V60051 1''\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eEAN (GTIN)\u003c\/td\u003e\n\u003ctd\u003e5902963498090\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBatteries included\u003c\/td\u003e\n\u003ctd\u003eno\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eMaximum pump output\u003c\/td\u003e\n\u003ctd\u003e1800 l\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"deget_narzedzia","offers":[{"title":"Default Title","offer_id":54641186701659,"sku":"18990396149","price":99.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9355\/4523\/files\/SUBMERSIBLE-SCREW-WATER-PUMP-WELL-SUBMERSIBLE-PRESSURE-550W-STRONG.jpg?v=1793859980","url":"https:\/\/homy.lt\/products\/panardinamasis-vandens-siurblys-suliniui-550w","provider":"homy.lt","version":"1.0","type":"link"}