{"product_id":"sieninis-rekuperatorius-solo-100-mm-su-dregmes-jutikliu-g3-filtrais-46-m-val","title":"Sieninis rekuperatorius SOLO 100 mm su drėgmės jutikliu, G3 filtrais, 46 m³\/val.","description":"\u003ch2\u003eTrumpai apie prekę\u003c\/h2\u003e\u003cp\u003ePrekė: Sieninis rekuperatorius SOLO 100 mm su drėgmės jutikliu, G3 filtrais, 46 m³\/val.. Kategorija: Rekuperacinės vėdinimo sistemos.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGamintojas:\u003c\/strong\u003e Vents\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModelis:\u003c\/strong\u003e 5905679892558\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTHE DEVICE MEETS THE REQUIREMENTS OF THE CLEAN AIR PROGRAM AND IS ON THE ZUM LIST!!!\u003c\/b\u003e \u003cb\u003ePRODUCT NO.: WE-800457\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003efor installation in rooms such as rooms, living rooms and bedrooms\u003c\/p\u003e\u003ch2\u003eWall recuperator with heat recovery and moisture sensor and remote control\u003c\/h2\u003e\u003cp\u003e⭐ ⭐ ⭐ ⭐ ⭐\u003c\/p\u003e\u003cp\u003e✅Advantages and features:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh efficiency - max. \u003cb\u003e46 m3\/h (13 l\/s)\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eDiameter of ventilation duct -\u003cb\u003e 100 mm\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003enoise level:\u003cb\u003e from 27 dB(A) \/ 3m\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eheat recovery efficiency -\u003cb\u003e up to 85%\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003esupply voltage -\u003cb\u003e 230V \/ 50Hz\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncludes \u003cb\u003eremote control\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConnection cable with plug - length\u003c\/b\u003e \u003cb\u003ewire approx.\u003c\/b\u003e \u003cb\u003e150 cm\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eTemperature of transported air -\u003cb\u003e -15...+40[°C]\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eceramic, hygroscopic (capable of absorbing water vapour and water - no condensation effect), accumulative heat exchanger\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003eHumidity sensor - regulation in the range \u003cb\u003e60÷90 %\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnergy efficiency class - \u003cb\u003eA\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe device is designed to work indoors under the following conditions: outdoor air temperature from -15 °C to +40 °C and relative humidity in the room up to 50 %;\u003c\/li\u003e\n\u003cli\u003ePossibility of \u003cb\u003eextension of the channel\u003c\/b\u003e in case of thicker wall (wall) than 380mm - using a channel with the symbol \u003cb\u003e150-4\u003c\/b\u003e\u003cb\u003e \u003c\/b\u003e (see above on the link \u003cb\u003eBUY INCLUDED\u003c\/b\u003e)\u003c\/li\u003e\n\u003cli\u003ereputable manufacturer -\u003cb\u003e VENTS (VENTIKA brand)\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDecentralized Heat Recovery Ventilator with Humidity Sensor\u003c\/h2\u003e\u003cp\u003e\u003cb\u003e⭐️⭐️⭐️⭐️⭐️\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003e✅Purpose, Construction, and Benefits:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEfficient, energy-saving\u003c\/b\u003e supply and exhaust ventilation for apartments, houses, villas, utility rooms, and commercial spaces. Significantly reduces heat loss during room ventilation through effective heat recovery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaintains humidity balance\u003c\/b\u003e and controlled air exchange to create a personalized microclimate.\u003c\/li\u003e\n\u003cli\u003eThe unit consists of an indoor panel with a decorative front panel, a compact internal module with a heat exchanger, a ventilation duct, and an external ventilation outlet with a hood.\u003c\/li\u003e\n\u003cli\u003eThe core functional component is the compact internal module with a heat exchanger.\u003c\/li\u003e\n\u003cli\u003eThe compact internal module includes a fan, a heat exchanger, and two filters that provide pre-filtration of air and prevent dust and foreign objects from entering the heat exchanger and fan.\u003c\/li\u003e\n\u003cli\u003eThe indoor panel is equipped with a connection cable (\u003cb\u003eapprox. 150 cm\u003c\/b\u003e) with a **plug**.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEffective\u003c\/b\u003e, **energy-saving** continuous **ventilation** for individual rooms, while minimizing heat loss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFiltration\u003c\/b\u003e of incoming **air**.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHelps maintain proper air humidity\u003c\/b\u003e.\u003c\/li\u003e\n\u003cli\u003eDesigned for direct installation in an **external wall**.\u003c\/li\u003e\n\u003cli\u003e**Touchless operation** thanks to the included **remote control**, which allows for all settings and adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eModern Wall-Mounted Heat Recovery Ventilator with Remote Control and Air Filters\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003e⭐️⭐️⭐️⭐️⭐️\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003e✅Unit Construction:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003e1️⃣ Replaceable G3 class air filter (2 pcs)\u003c\/b\u003e - cleans the air from dust and foreign objects. Prevents contamination of the heat exchanger.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e2️⃣ Ventilation duct with spacer ring\u003c\/b\u003e - to ensure the required distance between the fan and the heat exchanger.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e3️⃣ Ceramic heat exchanger\u003c\/b\u003e - utilizes thermal energy from exhaust air to heat incoming air.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e4️⃣ External ventilation hood\u003c\/b\u003e - prevents water and foreign objects from entering the unit.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e5️⃣ Reversible fan\u003c\/b\u003e - fan that generates exhaust or supply airflow.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e6️⃣ Decorative front panel\u003c\/b\u003e with a fan, equipped with a cable with a plug and switch (cable length approx. 170 cm) and an adjustable humidity sensor (located under the decorative front panel).\u003c\/p\u003e\u003cp\u003e\u003cb\u003e✳ OPERATING MODES OF THE DEVICE\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe device works in two cycles (marks in the diagram below):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eI. -\u003c\/b\u003e \u003cb\u003eFirst cycle (60 seconds)\u003c\/b\u003e - Warm, used air removed from the room flows through the heat exchanger, transferring heat and moisture. After 60 seconds of heating the heat exchanger, the ventilation unit switches to airflow mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eII.\u003c\/b\u003e \u003cb\u003e- Cycle two (60 seconds)\u003c\/b\u003e - Fresh, cool air from the outside flows through the heat exchanger. The air is humidified and heated by the heat previously stored in the exchanger. After 60 seconds, the fan switches back to exhaust mode and the cycle repeats.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e✳ CONTROL OF THE SOLO+ DEVICE WITH THE REMOTE CONTROL\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe device is connected to the electrical network using a cable with a plug.\u003c\/p\u003e\u003cp\u003eThe functions of the remote control buttons are shown in the figure below.\u003c\/p\u003e\u003cp\u003eThe current fan speed is indicated by a color LED on the internal panel. The first (lower) speed is indicated by a green diode, the second (higher) speed is indicated by a blue diode.\u003c\/p\u003e\u003cp\u003eConfirmation of receiving the command from the remote control is indicated by a short-term decrease in the brightness of the LED on the internal panel.\u003c\/p\u003e\u003cp\u003eWhen turned on with the On button. He's out. On the remote control, the fan starts working at the speed at which it was switched off.\u003c\/p\u003e\u003cp\u003eWhen switched on with buttons I or II, the fan starts working at the right speed.\u003c\/p\u003e\u003cp\u003eIf the humidity sensor is switched on, then after exceeding the set humidity level, the fan switches to the second (higher) speed. When the outdoor air humidity is high, the fan can switch to a second (higher) speed as a result of the humidity sensor. If such switching is undesirable, the humidity sensor shall be temporarily switched off by means of a remote control.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e⚠ Remote control\u003c\/b\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eSetting \u003cb\u003efirst\u003c\/b\u003e (lower) or \u003cb\u003esecond\u003c\/b\u003e (higher) \u003cb\u003efan speed\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnabling or disabling the \u003cb\u003ehumidity sensor\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnabling or disabling \u003cb\u003enight mode\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cb\u003e✳ HUMIDITY SENSOR LEVEL ADJUSTMENT\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eAdjusting the threshold of the humidity sensor is made by rotating the potentiometer knob with a special plastic screwdriver.\u003c\/p\u003e\u003cp\u003eWhen night mode is turned on, the device operates at the first (lower) speed for 8 hours. During this time, the brightness of the LED is reduced and the device does not respond to the change in speed and operation of the humidity sensor.\u003c\/p\u003e\u003cp\u003eAfter this time, the device will return to its previous operating mode. Night mode can be turned off at any time with the appropriate button on the remote control.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e⚙ TECHNICAL DATA\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRated voltage - \u003cb\u003e100÷230\u003c\/b\u003e [V\/50(60)Hz]\u003c\/li\u003e\n\u003cli\u003ePower consumption - \u003cb\u003e1,5÷2,3\u003c\/b\u003e [W]\u003c\/li\u003e\n\u003cli\u003eCurrent consumption - \u003cb\u003e0,046÷0,047\u003c\/b\u003e [A]\u003c\/li\u003e\n\u003cli\u003eEfficiency of the device - \u003cb\u003e30÷46\u003c\/b\u003e [m3\/h]\u003c\/li\u003e\n\u003cli\u003eTemp. transported air - \u003cb\u003e-15...+40\u003c\/b\u003e [°C]\u003c\/li\u003e\n\u003cli\u003eSound pressure level ~3m - \u003cb\u003e21÷26\u003c\/b\u003e [dB(A)]\u003c\/li\u003e\n\u003cli\u003eHeat recovery efficiency - up to \u003cb\u003e85\u003c\/b\u003e [%]\u003c\/li\u003e\n\u003cli\u003eSafety class - \u003cb\u003eIP24\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnergy efficiency class - \u003cb\u003eA\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eDIMENSIONS [mm]\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eASSEMBLY\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e❗ The device is designed to be installed in the internal wall, through a pre-prepared hole in the external wall of the building.\u003c\/p\u003e\u003cp\u003e‼ The set includes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInternal block of the device with ventilation duct - 1 set.\u003c\/li\u003e\n\u003cli\u003eExternal ventilation outlet - 1 pc.\u003c\/li\u003e\n\u003cli\u003eRemote control - 1 pc.\u003c\/li\u003e\n\u003cli\u003eMounting plate - 1 pc.\u003c\/li\u003e\n\u003cli\u003eStyrofoam wedges - 1 set.\u003c\/li\u003e\n\u003cli\u003eMini Plastic Screwdriver - 1 pc.\u003c\/li\u003e\n\u003cli\u003eSpare polyurethane foam - 4 pcs.\u003c\/li\u003e\n\u003cli\u003eUser Manual - 1 pc.\u003c\/li\u003e\n\u003cli\u003ePackaging - 1 pc.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e✳ FILTERS\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003e⚠ Filters should be cleaned once every 3 months\u003c\/b\u003e or more often depending on the state of their contamination:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWash and dry the filters. Dry filters install on the original place and assemble the device, performing the steps in reverse order.\u003c\/li\u003e\n\u003cli\u003eFilters can be cleaned with a vacuum cleaner.\u003c\/li\u003e\n\u003cli\u003eThe service life of the filter is 3 years.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e👌Even during regular maintenance of filters, dust may settle on the heat exchanger and fan.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIn order to maintain high heat transfer efficiency, the heat exchanger should be cleaned regularly.\u003c\/li\u003e\n\u003cli\u003eThe heat exchanger should be cleaned with a vacuum cleaner at least once a year.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGroup\u003c\/th\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003enew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eInvoice\u003c\/td\u003e\n\u003ctd\u003eWith a VAT invoice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eKind\u003c\/td\u003e\n\u003ctd\u003eswitchboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eProduct weight with unit packaging\u003c\/td\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eManufacturer code\u003c\/td\u003e\n\u003ctd\u003e5905679892558\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003ePackaging status\u003c\/td\u003e\n\u003ctd\u003eoriginal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eRange of energy efficiency classes\u003c\/td\u003e\n\u003ctd\u003eA+ - G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eEnergy efficiency class\u003c\/td\u003e\n\u003ctd\u003eA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCertificates of conformity\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBatteries included\u003c\/td\u003e\n\u003ctd\u003eyes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"polwent24_pl","offers":[{"title":"Default Title","offer_id":54668356452699,"sku":"18381007979","price":343.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9355\/4523\/files\/WALL-RECUPERATOR-SOLO-100mm-PILOT-MOISTURE-SENSOR-FILTERS-G3-46m3-h.jpg?v=1794060624","url":"https:\/\/homy.lt\/products\/sieninis-rekuperatorius-solo-100-mm-su-dregmes-jutikliu-g3-filtrais-46-m-val","provider":"homy.lt","version":"1.0","type":"link"}