{"product_id":"suvirinimo-aparatas-su-plazmos-pjaustytuvu-sherman-digitig-204-quattro","title":"Suvirinimo aparatas su plazmos pjaustytuvu Sherman DIGITIG 204 QUATTRO","description":"\u003ch2\u003eTrumpai apie prekę\u003c\/h2\u003e\u003cp\u003ePrekė: Suvirinimo aparatas su plazmos pjaustytuvu Sherman DIGITIG 204 QUATTRO. Kategorija: Inverteriniai suvirinimo aparatai.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGamintojas:\u003c\/strong\u003e Sherman\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModelis:\u003c\/strong\u003e DIGITIG 204 QUATTRO\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSHERMAN DIGITIG 204 QUATTRO PLASMA\u003c\/h2\u003e \u003cp\u003eManufacturer: \u003cb\u003eSherman |\u003c\/b\u003e Welding methods: \u003cb\u003eMMA, TIG HF DC, Cold Welding, Plasma cutting | \u003c\/b\u003ePower supply: \u003cb\u003e230V | \u003c\/b\u003eWelding current: \u003cb\u003e200A | \u003c\/b\u003eEfficiency: \u003cb\u003e60% | \u003c\/b\u003eCutting current range: \u003cb\u003e15-50A |\u003c\/b\u003e Max cutting thickness\u003cb\u003e:\u003c\/b\u003e \u003cb\u003e12mm\u003c\/b\u003e\u003c\/p\u003e\u003ch2\u003eSTANDARD EQUIPMENT:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSherman DIGITIG 204 QUATTRO welding machine with plasma cutter\u003c\/li\u003e\n\u003cli\u003eTIG-17 4m welding torch\u003c\/li\u003e\n\u003cli\u003ePlasma holder PT-31 4m\u003c\/li\u003e\n\u003cli\u003eElectrode cable\u003c\/li\u003e\n\u003cli\u003eBulk cable\u003c\/li\u003e\n\u003cli\u003eAir preparation unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOther accessories needed for full operation of the welding machine such as\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cb\u003egas cylinder,\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003ewelding wires\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e visor, gloves\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eWelding torch spare parts\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eThe DIGITIG 204 QUATTRO\u003c\/b\u003e welding machine is the latest generation device, made in IGBT technology and equipped with digital control.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIt is used for manual welding using TIG DC method,\u003c\/b\u003e \u003cb\u003eMMA\u003c\/b\u003e (wrapped electrode) of steel and non-ferrous metals with direct current with the possibility of using current pulsation. It also enables \u003cb\u003eplasma cutting\u003c\/b\u003e of steel, aluminum and copper sheets and elements.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDigital control\u003c\/b\u003e allows full adjustment and control of welding parameters of arc and pulse characteristics. Thanks to the \u003cb\u003eFan Stop\u003c\/b\u003e function, the noise level has been significantly reduced when the fan is turned off at low load.\u003c\/p\u003e\u003cp\u003eIn addition, it has \u003cb\u003eHF\u003c\/b\u003e, the ability to control in two-bar and four-bar mode, and a variant of spot welding, the so-called. cold welding (\u003cb\u003ecold welding\u003c\/b\u003e).\u003c\/p\u003e\u003cp\u003eThe welder is made in \u003cb\u003eIGBT\u003c\/b\u003e inverter technology, which allowed for a significant \u003cb\u003ereduction\u003c\/b\u003e of its weight and dimensions. Stable \u003cb\u003eoutput\u003c\/b\u003e parameters guarantee \u003cb\u003ehigh quality weld\u003c\/b\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eExample applications\u003c\/b\u003e: light industry, field renovation works, workshop work, automotive, silencer welding.\u003c\/p\u003e\u003ch2\u003eTECHNICAL DATA:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCatalog number:\u003c\/b\u003e 7812713\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWelding methods:\u003c\/b\u003e MMA, TIG HF DC, Cold Welding, Plasma cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower supply voltage [V]:\u003c\/b\u003e AC 230 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax.\u003c\/b\u003e \u003cb\u003epower consumption [A]:\u003c\/b\u003e 30 A MMA: 29 A: TIG 21 A; CUT: 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWelding \/ cutting current MMA:\u003c\/b\u003e 20-180 A; TIG: 10-200 A; CUT: 15 – 50 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWelding current [A]:\u003c\/b\u003e MMA: 180 A \/ 25%; TIG:200A \/ 60%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum cutting thickness [mm]:\u003c\/b\u003e 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorking cycle [%]:\u003c\/b\u003e MMA: 180 A \/ 25%; TIG:200A \/ 60%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage in foreign state.\u003c\/b\u003e \u003cb\u003e[V]:\u003c\/b\u003e MMA: 68 V, TIG: 68 V; CUT: 245 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGas flow:\u003c\/b\u003e 0 – 2 s\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGas flow:\u003c\/b\u003e 1 – 15 s\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower build-up:\u003c\/b\u003e 0 – 15 s\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower drop:\u003c\/b\u003e 0 – 15 s\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInitial current:\u003c\/b\u003e 10 – 200 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBase current:\u003c\/b\u003e 10 – 200 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCrater current:\u003c\/b\u003e 10 – 200 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePulse frequency:\u003c\/b\u003e 0,5 - 200 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePulse width:\u003c\/b\u003e 10 – 90 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWelding time during spot welding:\u003c\/b\u003e 0,01 – 2,5 s\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBreak time during spot welding:\u003c\/b\u003e 0,1 – 10 s\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMass [kg]:\u003c\/b\u003e 8,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDimensions (D x SZ x W) [mm]:\u003c\/b\u003e 430 x 170 x 310\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIGBT TECHNOLOGY\u003c\/h2\u003e\u003cp\u003eModern technology based on \u003cb\u003ebipolar transistors\u003c\/b\u003e with an isolated gate. It combines the ease of control\u003cb\u003e of field transistors with high breakdown voltage and the speed\u003c\/b\u003e of switching bipolar transistors. The use of \u003cb\u003eIGBT\u003c\/b\u003e technology has an impact on significantly extending the reliable operation of welding equipment.\u003c\/p\u003e\u003ch2\u003eDEGREE OF PROTECTION\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eIP23\u003c\/b\u003e means that the device is designed to work indoors and is not suitable for use in the rain.\u003c\/p\u003e\u003ch2\u003ePROTECTION AGAINST OVERHEATING\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eThe IGBT\u003c\/b\u003e module is protected from overheating by a protective installation that turns off the welding circuit of the device. After a few minutes, the welding machine is \u003cb\u003ecooled to a temperature\u003c\/b\u003e allowing it to be switched on again automatically.\u003c\/p\u003e\u003ch2\u003eWORK CYCLE\u003c\/h2\u003e\u003cp\u003eThe work cycle is based on a 10-minute period. The \u003cb\u003e60% duty cycle means that a 4-minute break\u003c\/b\u003e is required after 6 minutes of operation of the device. The 100% duty cycle means that the device can work continuously, without interruptions.\u003c\/p\u003e\u003ch2\u003eMMA\u003c\/h2\u003e\u003cp\u003eA method in which a \u003cb\u003ewrapped electrode\u003c\/b\u003e is used, consisting of a metal core covered with a sheath. The device allows welding with all types of electrodes, e.g. alkaline, cellulose, rutile or acidic.\u003c\/p\u003e\u003ch2\u003eVRD\u003c\/h2\u003e\u003cp\u003eThe VRD\u003cb\u003e function reduces the voltage in the unloaded state\u003c\/b\u003e. The correct voltage value is restored only just before the arc is ignited. This minimizes the \u003cb\u003e risk of electric shock\u003c\/b\u003e, but in some cases it can make it difficult to light the arc.\u003c\/p\u003e\u003ch2\u003eTIG DC HF\u003c\/h2\u003e\u003cp\u003eIn order to completely \u003cb\u003eeliminate the possibility of contamination\u003c\/b\u003e of the tungsten weld, it is recommended that the electrode does not touch the welded element; for this purpose, contactless arc ignition is used using high-frequency discharges generated by the built-in ionizer.\u003c\/p\u003e\u003ch2\u003eHF - NON-CONTACT ARC IGNITION\u003c\/h2\u003e\u003cp\u003eThe device is equipped with an ionizer enabling \u003cb\u003econtactless arc ignition\u003c\/b\u003e.\u003c\/p\u003e\u003ch2\u003e2T\/4T OPERATING MODE\u003c\/h2\u003e\u003cp\u003e\u003cb\u003e2T - \u003c\/b\u003e pressing the button in the handle of the handle turns on the ionizer and lights up the arc. Welding is carried out with the button pressed.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e4T -\u003c\/b\u003e pressing the button in the handle of the handle will turn on the ionizer and light up the arc then release the button and conduct welding with the button released. Pressing the button again will finish welding\u003c\/p\u003e\u003ch2\u003eINITIAL CURRENT\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eCurrent appearing in the circuit after pressing the\u003c\/b\u003e button in the handle. The higher the initial current, the easier it is to light the arc.\u003c\/p\u003e\u003cp\u003eHowever, when welding thin sheets, too high an initial current value can lead to sheet metal burning. In some welding modes, the current does not increase to heat the welded element.\u003c\/p\u003e\u003ch2\u003eTIME OF ELECTRICITY BUILD-UP\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eThe time of current build-up\u003c\/b\u003e of welding from the initial current to the set value of the welding current.\u003c\/p\u003e\u003ch2\u003eTIME OF CURRENT DROP\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eWelding current drop time\u003c\/b\u003e from set to zero or crater current value.\u003c\/p\u003e\u003ch2\u003eTIME OF PRE-EXHAUST GAS\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eTime from pressing the\u003c\/b\u003e button in the handle and opening the gas valve to the moment the arc ignites. Usually, it should be longer than 0,5 s to deliver shielding gas to the nozzle outlet of the burner to cover the welding start site and tungsten electrode.\u003c\/p\u003e\u003ch2\u003eGAS OUTFLOW TIME\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eTime from arc extinction\u003c\/b\u003e to closing the gas valve to shield the solidifying welding lake from air and to cool the tungsten electrode. Too short outflow time can result in oxidation of the weld. When welding in TIG AC mode (alternating current), this time should be longer.\u003c\/p\u003e\u003ch2\u003eTIG DC\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eAllows TIG\u003c\/b\u003e welding with DC current. This is required for welding non-ferrous metals.\u003c\/p\u003e\u003ch2\u003eTIG PULSE\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eThe function affects the shape of the weld and the focus of the arc\u003c\/b\u003e. Pulse welding also reduces the amount of heat supplied to the material and is applicable when welding thin materials.\u003c\/p\u003e\u003ch2\u003ePULSE FREQUENCY\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eFrequency\u003c\/b\u003e with which the value of the current pulse changes between the welding current and the base current.\u003c\/p\u003e\u003ch2\u003ePULSE WIDTH\u003c\/h2\u003e\u003cp\u003e\u003cb\u003ePulse duration\u003c\/b\u003e, allows you to adjust the depth of melting. The increase in width increases the depth of melting, reducing the amount of heat introduced into the material, reducing the risk of burning thinner sheets or smaller elements.\u003c\/p\u003e\u003ch2\u003eCRATER CURRENT\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eThe current used in some welding modes\u003c\/b\u003e when the arc is not extinguished immediately after the welding current drops. It allows you to fill the crater and the end of the weld.\u003c\/p\u003e\u003ch2\u003eCOLD TIG\u003c\/h2\u003e\u003cp\u003e\u003cb\u003ePoint variety of TIG\u003c\/b\u003e welding – so-called. cold welding for bonding thin elements, thanks to very low heat emission in the joining zone. It consists in cyclic short-term ignition and extinction of the arch.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cb\u003eSPOT\u003c\/b\u003e Pressing the switch in the handle of the handle will turn on the ionizer, light the arc for the time set by the COLD TIME parameter and extinguish the arc. Re-ignition of the arch requires releasing and pressing the button in the handle.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eCOLD TIME 0,01 – 2,5 p.\u003c\/h2\u003e\u003cp\u003eWelding time during spot welding (\u003cb\u003ecold welding\u003c\/b\u003e).\u003c\/p\u003e\u003ch2\u003ePAUSE TIME 0,1 – 10 seconds\u003c\/h2\u003e\u003cp\u003eInterruption time during spot welding (\u003cb\u003ecold welding\u003c\/b\u003e). Only for CPOT control mode.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eEasy\u003c\/b\u003e to use control panel allows precise and smooth adjustment of parameters. \u003cb\u003eDigital display\u003c\/b\u003e indicates the actual current during welding.\u003c\/p\u003e\u003ch2\u003ePLASMA\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eFunction for cutting\u003c\/b\u003e electrically conductive elements made of carbon and alloy steels, aluminium and its alloys, brass, copper, as well as cast iron\u003c\/p\u003e\u003ch2\u003eMAXIMUM CUTTING THICKNESS 12MM\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eThe value of the maximum cutting thickness\u003c\/b\u003e was determined under optimal cutting conditions of ordinary quality carbon steel. In order to select the right device, it is recommended to perform technological tests in real working conditions and on an example sample of material.\u003c\/p\u003e\u003ch2\u003eSTRONG AND ROBUST CONSTRUCTION\u003c\/h2\u003e\u003cp\u003eThe housing of the device is made of \u003cb\u003elight\u003c\/b\u003e and \u003cb\u003edurable \u003c\/b\u003ecomposites, resistant to all kinds of mechanical damage.\u003c\/p\u003e\u003ch2\u003eEASY TRANSPORT\u003c\/h2\u003e\u003cp\u003eEquipping the welding machine with a\u003cb\u003e transport handle\u003c\/b\u003e for convenience when changing jobs.\u003c\/p\u003e\u003ch2\u003eCOOLING\u003c\/h2\u003e\u003cp\u003eThe device has a cooling system with a \u003cb\u003efan\u003c\/b\u003e which significantly increases its \u003cb\u003eefficiency\u003c\/b\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGroup\u003c\/th\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003enew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eInvoice\u003c\/td\u003e\n\u003ctd\u003eWith a VAT invoice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSherman\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003e5.8 kVA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eSupply voltage (V)\u003c\/td\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eDuty cycle time\u003c\/td\u003e\n\u003ctd\u003e60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eMaximum electrode diameter\u003c\/td\u003e\n\u003ctd\u003e3.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eDevice weight\u003c\/td\u003e\n\u003ctd\u003e8.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWelding range\u003c\/td\u003e\n\u003ctd\u003e10–200 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eLength of ground cable\u003c\/td\u003e\n\u003ctd\u003e200 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWelding cable length\u003c\/td\u003e\n\u003ctd\u003e400 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eProduct weight with unit packaging\u003c\/td\u003e\n\u003ctd\u003e20 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eManufacturer code\u003c\/td\u003e\n\u003ctd\u003e7812713\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eEAN (GTIN)\u003c\/td\u003e\n\u003ctd\u003e5903686618277\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDIGITIG 204 QUATTRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWelding methods\u003c\/td\u003e\n\u003ctd\u003eplasma cutting,MMA,TIG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eAdditional features\u003c\/td\u003e\n\u003ctd\u003einfinitely adjustable welding current,LCD display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"www_spawarena_pl","offers":[{"title":"Default Title","offer_id":54720702906715,"sku":"18342995621","price":365.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9355\/4523\/files\/Sherman-DIGITIG-204-QUATTRO-welding-machine-with-plasma-cutter.jpg?v=1794162148","url":"https:\/\/homy.lt\/products\/suvirinimo-aparatas-su-plazmos-pjaustytuvu-sherman-digitig-204-quattro","provider":"homy.lt","version":"1.0","type":"link"}