{"product_id":"suvirinimo-inverteris-sherman-tig-ac-dc-210-200a-su-pulsu","title":"Suvirinimo inverteris Sherman TIG AC\/DC 210, 200A, su pulsu","description":"\u003ch2\u003eTrumpai apie prekę\u003c\/h2\u003e\u003cp\u003ePrekė: Suvirinimo inverteris Sherman TIG AC\/DC 210, 200A, su pulsu. Kategorija: Invertoriniai suvirinimo aparatai.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGamintojas:\u003c\/strong\u003e Sherman\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModelis:\u003c\/strong\u003e SINW-TIG210ACDCP\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSHERMAN TIG 210 AC\/DC PULSE\u003c\/h2\u003e\u003cp\u003eBrand: \u003cb\u003eSHERMAN |\u003c\/b\u003e Welding methods: \u003cb\u003eTIG AC\/DC, MMA\u003c\/b\u003e\u003cb\u003e | \u003c\/b\u003ePower supply: \u003cb\u003e230V | \u003c\/b\u003eWelding current: \u003cb\u003e200A | \u003c\/b\u003eEfficiency: \u003cb\u003e60%\u003c\/b\u003e\u003c\/p\u003e\u003ch2\u003eSTANDARD EQUIPMENT\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSherman \u003cb\u003eWelder\u003c\/b\u003e \u003cb\u003eTIG 210 AC\/DC pulse\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWelding torch\u003c\/b\u003e T-26\/4m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBulk cable\u003c\/b\u003e 2,5m\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eOperating instructions\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eGuarantee card\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOther accessories needed for full operation of the welding machine such as:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cb\u003egas cylinder,\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003ereducer,\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003ewelding wires,\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e visor,\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003egloves,\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eWelding torch spare parts\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eYou can find us at \u003cb\u003eother auctions\u003c\/b\u003e or a welding machine in a set with the given accessories.\u003c\/p\u003e\u003ch2\u003eSHERMAN TIG WELDING MACHINE 210 ACDC PULSE\u003c\/h2\u003e\u003cp\u003eThe latest generation \u003cb\u003e\u003c\/b\u003e device, designed for \u003cb\u003eprofessional\u003c\/b\u003e applications. It is made in \u003cb\u003eIGBT\u003c\/b\u003e technology and equipped with \u003cb\u003edigital control\u003c\/b\u003e.\u003c\/p\u003e\u003cp\u003eThe use of \u003cb\u003einverter technology\u003c\/b\u003e resulted in a significant \u003cb\u003ereduction of dimensions\u003c\/b\u003e and \u003cb\u003emass of devices\u003c\/b\u003e, which allows their operation in particularly difficult to access places.\u003c\/p\u003e\u003cp\u003eUsed for manual welding by method\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTIG\u003c\/b\u003e steel and non-ferrous metals with direct and alternating current.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMMA\u003c\/b\u003e (wrapped electrode).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe welding machine allows \u003cb\u003efull adjustment\u003c\/b\u003e and \u003cb\u003econtrol\u003c\/b\u003e of all welding parameters of \u003cb\u003echaracteristic\u003c\/b\u003e \u003cb\u003earch\u003c\/b\u003e and \u003cb\u003epulse\u003c\/b\u003e.\u003c\/p\u003e\u003cp\u003eDuring welding using the \u003cb\u003eTIG\u003c\/b\u003e method, it is possible to regulate \u003cb\u003eincrease \u003c\/b\u003e and \u003cb\u003edecrease\u003c\/b\u003e of current, \u003cb\u003eoutflow\u003c\/b\u003e and \u003cb\u003eoutflow\u003c\/b\u003e of gas and parameters of \u003cb\u003epulse\u003c\/b\u003e and \u003cb\u003ecurrent\u003c\/b\u003e \u003cb\u003eAC\u003c\/b\u003e.\u003c\/p\u003e\u003cp\u003eIt has \u003cb\u003eHF ignition, 2T\/4T function and display indicating welding current\u003c\/b\u003e. The device is characterized by excellent welding properties, it is recommended especially for professionals.\u003c\/p\u003e\u003cp\u003eIn a wide \u003cb\u003erange, it is used\u003c\/b\u003e for both production and service work. It is designed to work in \u003cb\u003eclosed\u003c\/b\u003e and \u003cb\u003eroofed\u003c\/b\u003e rooms.\u003c\/p\u003e\u003ch2\u003eTECHNICAL PARAMETERS\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePower supply voltage\u003c\/b\u003e AC 230V ±10% 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum power consumption\u003c\/b\u003e 4,6 kVA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal welding current \/ duty cycle\u003c\/b\u003e MMA: 180 A \/ 60%; TIG 200 A \/ 60%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal voltage without load\u003c\/b\u003e 70 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum current consumption \u003c\/b\u003e36,5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNetwork security\u003c\/b\u003e 25 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMass (without accessories)\u003c\/b\u003e 15 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDimensions\u003c\/b\u003e 510 x 235 x 510 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDegree of protection\u003c\/b\u003e IP21\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePARAMETER ADJUSTMENT RANGES\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eGas flow\u003c\/b\u003e 0,1 – 1 s\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGas flow\u003c\/b\u003e 0 – 15 s\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower build-up\u003c\/b\u003e 0 – 10 s\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower drop\u003c\/b\u003e 0 – 25 s\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInitial current\u003c\/b\u003e 10 – 200 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWelding current: \u003c\/b\u003e \u003cb\u003eTIG\u003c\/b\u003e: 10 - 200 A \u003cb\u003eMMA\u003c\/b\u003e: 10 - 180 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBase current\u003c\/b\u003e 5 – 95 % of welding current\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCrater current\u003c\/b\u003e 10 – 200 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePulse frequency\u003c\/b\u003e 0,5 – 5 Hz \u0026amp; 10 – 200 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePulse width\u003c\/b\u003e 10 - 90 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency AC\u003c\/b\u003e 40 – 200 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBalance AC\u003c\/b\u003e 10 – 90 %\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIGBT TECHNOLOGY\u003c\/h2\u003e\u003cp\u003eThe basis for the construction of the electrical energy conversion system of the welding machine are electronic systems made in \u003cb\u003eIGBT\u003c\/b\u003e technology enabling operation in the frequency range above \u003cb\u003e200 kHz\u003c\/b\u003e.\u003c\/p\u003e\u003ch2\u003eDEGREE OF PROTECTION\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eIP\u003c\/b\u003e determines the degree to which the device is resistant to solid and waterborne contaminants entering. \u003cb\u003eIP21 \u003c\/b\u003e means that the device is adapted to work in closed rooms.\u003c\/p\u003e\u003ch2\u003ePROTECTION AGAINST OVERHEATING\u003c\/h2\u003e\u003cp\u003eThe \u003cb\u003eIGBT \u003c\/b\u003e module is protected from overheating by a protective installation that turns off the welding circuit of the device. After a few minutes, the welding machine cools down to a temperature that allows it to be switched on again automatically\u003c\/p\u003e\u003ch2\u003eMMA\u003c\/h2\u003e\u003cp\u003eA method in which a \u003cb\u003ewrapped electrode is used,\u003c\/b\u003e consisting of a metal core covered with a sheath. The welder feeds the electrode as it melts into the welded object so as to maintain a fixed-length arc.\u003c\/p\u003e\u003ch2\u003eTIG AC\/DC\u003c\/h2\u003e\u003cp\u003eIt enables \u003cb\u003eTIG\u003c\/b\u003e welding with alternating current. This is required for welding aluminum and its alloys.\u003c\/p\u003e\u003ch2\u003eHF\u003c\/h2\u003e\u003cp\u003eTungsten electrode welding in protective gas shield with \u003cb\u003epilot arc (contactless)\u003c\/b\u003e\u003c\/p\u003e\u003ch2\u003eWORK CYCLE\u003c\/h2\u003e\u003cp\u003eThe work cycle is based on a 10-minute period. \u003cb\u003eWorking cycle 60%\u003c\/b\u003e means that after \u003cb\u003e6 minutes\u003c\/b\u003e of operation of the device, a \u003cb\u003e4-minute break\u003c\/b\u003e is required. The 100% duty cycle means that the device can work continuously, without interruptions.\u003c\/p\u003e\u003ch2\u003ePOSTURE CURRENT\u003c\/h2\u003e\u003cp\u003eCurrent responsible for \u003cb\u003emaintenance of the welding process\u003c\/b\u003e, the lower value of the current pulse. It makes it easier to control the amount of heat introduced into the material.\u003c\/p\u003e\u003ch2\u003eINITIAL CURRENT\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eCurrent appearing in the circuit after pressing the\u003c\/b\u003e button in the handle. The higher the initial current, the easier it is to light the arc.\u003c\/p\u003e\u003cp\u003eHowever, when welding thin sheets, too high an initial current value can lead to sheet metal burning. In some welding modes, the current does not increase to heat the welded element.\u003c\/p\u003e\u003ch2\u003eCRATER CURRENT\u003c\/h2\u003e\u003cp\u003eCurrent used in some welding modes, when the arc is not extinguished immediately after the phase of falling welding current. It allows you to \u003cb\u003efill the crater\u003c\/b\u003e and the end of the weld.\u003c\/p\u003e\u003ch2\u003e2T\/4T OPERATING MODE\u003c\/h2\u003e\u003cp\u003e\u003cb\u003e2T - Two-bar mode\u003c\/b\u003e - pressing the button in the handle of the handle turns on the ionizer and lights up the arc. Welding is carried out with the button pressed.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e4T - Four-bar mode\u003c\/b\u003e - pressing the button in the handle will turn on the ionizer and light the arc then release the button and conduct welding with the button released. Pressing the button again will complete the welding.\u003c\/p\u003e\u003ch2\u003eTIME OF CURRENT DROP\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eWelding current drop time\u003c\/b\u003e from set to zero or crater current value.\u003c\/p\u003e\u003ch2\u003eTIME OF ELECTRICITY BUILD-UP\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eThe time of current build-up\u003c\/b\u003e of welding from the initial current to the set value of the welding current.\u003c\/p\u003e\u003ch2\u003eTIG PULSE\u003c\/h2\u003e\u003cp\u003eIt affects the \u003cb\u003eshape of the weld\u003c\/b\u003e and \u003cb\u003efocus of the arc\u003c\/b\u003e. Pulse welding also reduces the amount of heat supplied to the material and is applicable when welding thin materials.\u003c\/p\u003e\u003ch2\u003eTIME OF PRE-EXHAUST GAS\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eTime from pressing the\u003c\/b\u003e button in the handle to the moment the arc is lit. Usually it should be longer than 0,5 s to deliver the shielding gas to the nozzle outlet of the burner. to cover the welding start site and the tungsten electrode.\u003c\/p\u003e\u003cp\u003eIn the case of a \u003cb\u003elonger pipe\u003c\/b\u003e supplying gas from the cylinder, the pre-flow time should be longer.\u003c\/p\u003e\u003ch2\u003eGAS OUTFLOW TIME\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eTime from arc extinction\u003c\/b\u003e to closing the gas valve. to shield the solidifying welding lake from air and to cool the tungsten electrode.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eToo short\u003c\/b\u003e outflow time may result in oxidation of the weld.\u003c\/p\u003e\u003ch2\u003ePULSE WIDTH\u003c\/h2\u003e\u003cp\u003e\u003cb\u003ePulse duration\u003c\/b\u003e, allows you to adjust the depth of melting. The increase in width increases the depth of melting, reducing the amount of heat introduced into the material, reducing the risk of burning thinner sheets or smaller elements.\u003c\/p\u003e\u003ch2\u003ePULSE FREQUENCY\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eFrequency\u003c\/b\u003e with which the value of the current pulse changes between the welding current and the base current.\u003c\/p\u003e\u003ch2\u003eFREQUENCY OF CURRENT AC\u003c\/h2\u003e\u003cp\u003eFunction useful for welding aluminum. The \u003cb\u003ehigher the frequency\u003c\/b\u003e, the better the quality of the weld and the better the focus of the arc.\u003c\/p\u003e\u003ch2\u003eAC CURRENT BALANCE\u003c\/h2\u003e\u003cp\u003eThe ratio of the duration of the positive phase of the current to the negative phase. \u003cb\u003eReduction of balance\u003c\/b\u003e causes more heat to be introduced into the material, resulting in a narrower weld and deeper melting, while reducing the thermal load on the tungsten electrode.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIncreasing the balance\u003c\/b\u003e causes less heat to be introduced into the material, resulting in better cleaning, a wide weld and shallower melting, but significantly burdens the tungsten electrode.\u003c\/p\u003e\u003ch2\u003eSTRONG AND ROBUST CONSTRUCTION\u003c\/h2\u003e\u003cp\u003eThe housing of the device is made of \u003cb\u003elight\u003c\/b\u003e and \u003cb\u003edurable \u003c\/b\u003ecomposites, resistant to all kinds of mechanical damage.\u003c\/p\u003e\u003ch2\u003eCOOLING\u003c\/h2\u003e\u003cp\u003eThe device has a cooling system \u003cb\u003efan\u003c\/b\u003e which definitely increases its \u003cb\u003eefficiency\u003c\/b\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGroup\u003c\/th\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003enew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eInvoice\u003c\/td\u003e\n\u003ctd\u003eWith VAT invoice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSherman\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003e4.6 kVA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eSupply voltage (V)\u003c\/td\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eDuty cycle time\u003c\/td\u003e\n\u003ctd\u003e60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eMaximum electrode diameter\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eDevice weight\u003c\/td\u003e\n\u003ctd\u003e15 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWelding range\u003c\/td\u003e\n\u003ctd\u003e10–200 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eLength of ground cable\u003c\/td\u003e\n\u003ctd\u003e250 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWelding cable length\u003c\/td\u003e\n\u003ctd\u003e400 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eProduct weight with unit packaging\u003c\/td\u003e\n\u003ctd\u003e23.54 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eManufacturer code\u003c\/td\u003e\n\u003ctd\u003eSINW-TIG210ACDCP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eEAN (GTIN)\u003c\/td\u003e\n\u003ctd\u003e5906372629106\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSINW-TIG210ACDCP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWelding methods\u003c\/td\u003e\n\u003ctd\u003eMMA,TIG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eAdditional features\u003c\/td\u003e\n\u003ctd\u003einfinitely adjustable welding current,EURO handle,LCD display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"www_spawarena_pl","offers":[{"title":"Default Title","offer_id":53212717416795,"sku":"15249894472","price":531.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9355\/4523\/files\/Sherman-TIG-AC-DC-210-Inverter-welder-with-pulse-200A.jpg?v=1780308379","url":"https:\/\/homy.lt\/products\/suvirinimo-inverteris-sherman-tig-ac-dc-210-200a-su-pulsu","provider":"homy.lt","version":"1.0","type":"link"}