{"product_id":"tinklo-adapteris-slzb-mr1u-zigbee-thread-cc2652p-efr32mg21-poe-usb-wifi-esp32-lan","title":"Tinklo adapteris SLZB-MR1U ZigBee Thread CC2652P EFR32MG21, PoE, USB, WiFi, ESP32, LAN","description":"\u003ch2\u003eTrumpai apie prekę\u003c\/h2\u003e\u003cp\u003ePrekė: Tinklo adapteris SLZB-MR1U ZigBee Thread CC2652P EFR32MG21, PoE, USB, WiFi, ESP32, LAN. Kategorija: Centriniai blokai.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eGamintojas:\u003c\/strong\u003e SMLIGHT\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003e⭐U Series\u003c\/h2\u003e\u003cp\u003eThis is an improved edition of the flagship \u003cb\u003eSLZB\u003c\/b\u003e coordinators, introducing key hardware fixes for professional smart home installations:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHardware Flow Control:\u003c\/b\u003e The introduction of hardware flow control for the radio system (SoC) eliminates errors in data transmission, significantly increasing stability under heavy network load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNative USB mode:\u003c\/b\u003e The device can work as a classic USB \"dongle\", where the radio module is visible directly in the system (Native USB-series), which minimizes latency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUSB-over-IP (Passthrough):\u003c\/b\u003e A unique feature that allows remote access to other USB devices (e.g. ZWave) connected to the coordinator directly via LAN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFull customization:\u003c\/b\u003e The new ESP32-S3 processor enables m.in. programmatic control of LEDs at the RJ45 socket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e⭐Modern multiradio architecture\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eSLZB-MR1U\u003c\/b\u003e is the latest fully modular multiradio smart home adapter from SMLIGHT. The device is equipped with two independent radio chipsets: \u003cb\u003eTexas Instruments CC2652P7\u003c\/b\u003e and \u003cb\u003eSilicon Labs EFR32MG21\u003c\/b\u003e, offering simultaneous support for Zigbee 3.0 and Thread (Matter-over-Thread) at the professional level. One of the key features of MR1U is \u003cb\u003enative USB passthrough support over Ethernet\u003c\/b\u003e, which enables cooperation with Z-Wave, additional Zigbee coordinators or any USB devices connected via TCP\/IP network.\u003c\/p\u003e\u003ch2\u003e⭐The most important features of SLZB-MR1U\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eUSB Passthrough via TCP\/IP\u003c\/b\u003e – Connect USB devices (Z-Wave dongles, additional ZigBee coordinators, UART) and access them via Ethernet as if they were connected locally.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo radio chips:\u003c\/b\u003e CC2652P7 (TI) + EFR32MG21 (Silicon Labs) – Simultaneous or switchable ZigBee 3.0 and Thread (Matter-over-Thread) support, +20dBm TX, high reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlexible connectivity options\u003c\/b\u003e – Ethernet (with PoE), 2.4 GHz Wi-Fi, USB Type-C for maximum versatility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower over Ethernet (PoE)\u003c\/b\u003e – Power supply and network connection with one cable (IEEE 802.3af 48V standard).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuilt-in SLZB-OS\u003c\/b\u003e – Intuitive web interface, automatic OTA updates, switching radio modes with one click.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNative compatibility\u003c\/b\u003e – Ready to work with \u003cb\u003eHome Assistant\u003c\/b\u003e (ZHA, Zigbee2MQTT), OpenThread Border Router, Z-Wave JS (via USB TCP\/IP), without additional configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e⭐SLZB-MR1U in Home Assistant\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eSLZB-MR1U\u003c\/b\u003e guarantees full integration with Home Assistant thanks to three paths to choose from:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eZHA\u003c\/b\u003e (Zigbee Home Automation): automatic detection, instant Zigbee Coordinator support via socket protocol (e.g. socket:\/\/ip:6638)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eZigbee2MQTT\u003c\/b\u003e: full control via MQTT, TCP\/IP configuration (port 6638), higher power transmission modes (up to +20 dBm), radio monitoring and support for virtually any Zigbee device\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOfficial integration of SMLIGHT\u003c\/b\u003e: dedicated diagnostic entities (Ethernet and Wi-Fi connection status, temperatures, firmware versions, LED, automatic OTA updates, restart and mode management via Home Assistant panel)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e⭐Examples of automation:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAutomatic restart or update with errors\u003c\/li\u003e\n\u003cli\u003eSwitch radio modes as needed (Zigbee ↔ Thread)\u003c\/li\u003e\n\u003cli\u003eMonitoring of temperature, PoE power supply, connectivity status\u003c\/li\u003e\n\u003cli\u003eEnabling night mode on LED or remote restart by HA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e⭐USB Passthrough via TCP\/IP\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUSB Z-Wave, Zigbee, BLE, Matter to Home Assistant\/NAS over the network (e.g. Address: tcp:\/\/192.168.x. x:8638)\u003c\/li\u003e\n\u003cli\u003eSupport the most popular chipsets: CP210x, CH340\/41, PL2303, CH9102\u003c\/li\u003e\n\u003cli\u003ePoE power mode allows you to transfer power to USB devices; for larger consumptions recommended powered USB hub\u003c\/li\u003e\n\u003cli\u003ePlug-and-play compatibility – no need to install additional drivers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e⭐Working modes and switching functions\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eSLZB-MR1U supports mode:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eZigBee coordinator (ZHA\/Zigbee2MQTT),\u003c\/li\u003e\n\u003cli\u003eZigBee router,\u003c\/li\u003e\n\u003cli\u003eMatter-over-Thread Border Router\u003c\/li\u003e\n\u003cli\u003eAutonomous ZigBee hub\u003c\/li\u003e\n\u003cli\u003eUSB Passthrough Gateway (for Z-Wave\/Serial)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSwitching modes is possible from the web interface, HA integration or physical button – also automatically through HA rules.\u003c\/p\u003e\u003ch2\u003e⭐Advanced SLZB-OS features\u003c\/h2\u003e\u003cp\u003eSLZB-OS is the official firmware platform (operating system) developed by SMLIGHT for their line of Zigbee adapters and multiradio devices with Ethernet\/USB\/PoE.\u003c\/p\u003e\u003cp\u003eIt provides an extensive, intuitive web environment for configuration, OTA updates, switching device modes (Zigbee Coordinator, Router, Thread Border Router), diagnostics management, and security and automation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSLZB-OS enables:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eintegration with Home Assistant (ZHA, Zigbee2MQTT),\u003c\/li\u003e\n\u003cli\u003eintegration with OpenThread,\u003c\/li\u003e\n\u003cli\u003eVPN\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003ezHub mode (autonomous ZigBee control without server)\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003eOne-click mode switching – ZigBee Coordinator, Router, Thread Border Router\u003c\/li\u003e\n\u003cli\u003eOTA updates – Remote updates for radio firmware and ESP32\u003c\/li\u003e\n\u003cli\u003eweb interface – Full control by http:\/\/slzb-mr1u.local\u003c\/li\u003e\n\u003cli\u003eVPN support – Secure remote management\u003c\/li\u003e\n\u003cli\u003eHub ZigBee mode – Direct control of devices without an external server\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e⭐SLZB-MR1U USB Passthrough\u003c\/h2\u003e\u003cp\u003eThis is a unique feature that allows you to connect any USB device – e.g. dongle Z-Wave, additional ZigBee coordinator or UART module – and make it available over Ethernet using TCP\/IP protocol.\u003c\/p\u003e\u003ch2\u003e⭐How does USB Passthrough work?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSimply connect your compatible USB device to the USB-A MR1U port\u003c\/li\u003e\n\u003cli\u003eAfter activating USB Passthrough in the panel (http:\/\/slzb-mr1u.local\/usb), the device is available by network address, e.g. tcp:\/\/192.168.x. x:6638, for Home Assistant, Z-Wave JS or other system\u003c\/li\u003e\n\u003cli\u003eSupported USB-UART chips: CP210x, CH340\/CH341, PL2303, CH9102 – compatibility with most Zigbee, Z-Wave and other radio dongles\u003c\/li\u003e\n\u003cli\u003eNo need to install additional drivers or dedicated software – the device recognizes USB \"live\" and makes it available over the network\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e⭐Examples of applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eProviding a Z-Wave dongle for Home Assistant running on NAS, VM or cloud\u003c\/li\u003e\n\u003cli\u003eRemote control of additional Zigbee coordinators, UART sensors or other radio-interfaces over the network, without the need to physically connect them to the host\u003c\/li\u003e\n\u003cli\u003eAllows you to separate the Zigbee\/Thread role (on built-in radios) and Z-Wave (on USB donglu), creating a multi-protocol control panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e⭐Important information\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePower supply: Do not connect PoE and USB-C at the same time, so as not to damage the device\u003c\/li\u003e\n\u003cli\u003eWhen using energy-consuming dongles, it is recommended to use an active USB hub to ensure power stability\u003c\/li\u003e\n\u003cli\u003eUpdating the firmware and USB Passthrough functions is done via the web panel and SLZB-OS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSLZB-MR1U is the first on the market to enable native USB-over-IP for smart home – it allows you to build a highly flexible infrastructure without hardware or location limitations.\u003c\/p\u003e\u003ch2\u003e⭐Why SLZB-MR1U?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMultiradio without compromise – Zigbee and Thread with two independent radios, native USB Passthrough\u003c\/li\u003e\n\u003cli\u003eStability and security – PoE, VPN, OTA updates, firewall\u003c\/li\u003e\n\u003cli\u003eVersatility – integration with any ecosystem, support for most USB\/SOC dongles on the market\u003c\/li\u003e\n\u003cli\u003eEase of expansion – you can add Z-Wave, BLE, RTLS and other functions via USB without replacing hardware\u003c\/li\u003e\n\u003cli\u003ePremium product – cross-platform, professional specification, world-class build quality\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe SLZB-MR1U adapter will revolutionize your smart home by allowing you to flexibly connect and manage Zigbee, Thread, Matter and USB devices through one compact gateway – ready for the future!\u003c\/p\u003e\u003ch2\u003e⭐ Specification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRadio: CC2652P7 (TI), EFR32MG21 (Silicon Labs)\u003c\/li\u003e\n\u003cli\u003eSupported protocols: Zigbee 3.0, Thread (Matter), Wi-Fi, Bluetooth, Ethernet\u003c\/li\u003e\n\u003cli\u003eTransmission power: +20 dBm (both radios)\u003c\/li\u003e\n\u003cli\u003eMemory: CC2652P7: 144+8 kB RAM, 704 kB Flash; EFR32MG21: 96 kB RAM, 1024 kB Flash\u003c\/li\u003e\n\u003cli\u003eAntenna: 2x SMA (external 2,4 GHz); PCB for Wi-Fi\/BLE\u003c\/li\u003e\n\u003cli\u003ePower Supply: 48V PoE, USB-C 5V DC (do not use both at once! )\u003c\/li\u003e\n\u003cli\u003ePower consumption: up to 1,5W with both radios\u003c\/li\u003e\n\u003cli\u003eHousing: ABS, wall mounting, DIN, double-sided tape included\u003c\/li\u003e\n\u003cli\u003eLED indicators: 6 service LEDs – 2 for each chipset, 2 for ESP32\u003c\/li\u003e\n\u003cli\u003ePorts: USB-A host (USB Passthrough), USB-C, Ethernet\u003c\/li\u003e\n\u003cli\u003eDimensions: compact, ventilated, full mounting kit in the box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e⭐Contents of the set\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAdapter SLZB-MR1U\u003c\/li\u003e\n\u003cli\u003e2x SMA External Antenna\u003c\/li\u003e\n\u003cli\u003eEthernet cable\u003c\/li\u003e\n\u003cli\u003eUSB-C cable\u003c\/li\u003e\n\u003cli\u003eScrewdriver, Screw Set, Mounting Helper, Manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGroup\u003c\/th\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003enew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSMLIGHT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eZigBee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eKind\u003c\/td\u003e\n\u003ctd\u003econtrol switchboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003emains\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCommunication\u003c\/td\u003e\n\u003ctd\u003eZigBee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eAdditional features\u003c\/td\u003e\n\u003ctd\u003eWiFi connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBatteries included\u003c\/td\u003e\n\u003ctd\u003eno\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"oursmarthome","offers":[{"title":"Default Title","offer_id":54078146576731,"sku":"18063237869","price":92.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9355\/4523\/files\/SLZB-MR1U-ZigBee-Thread-CC2652P-EFR32MG21-PoE-USB-WiFi-ESP32-LAN-Adapter.jpg?v=1789564802","url":"https:\/\/homy.lt\/products\/tinklo-adapteris-slzb-mr1u-zigbee-thread-cc2652p-efr32mg21-poe-usb-wifi-esp32-lan","provider":"homy.lt","version":"1.0","type":"link"}