{"product_id":"ultragarsinis-vandens-lygio-jutiklis-bakui-wifi-tuya-0-5-m","title":"Ultragarsinis vandens lygio jutiklis bakui WiFi Tuya, 0–5 m","description":"\u003ch2\u003eTrumpai apie prekę\u003c\/h2\u003e\u003cp\u003ePrekė: Ultragarsinis vandens lygio jutiklis bakui WiFi Tuya, 0–5 m. Kategorija: Jutikliai.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGamintojas:\u003c\/strong\u003e Sone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModelis:\u003c\/strong\u003e SB1755\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThe Sone Smart One liquid level sensor allows you \u003cb\u003eto constantly monitor the amount of water\u003c\/b\u003e or other non-aggressive liquid in the tank. The measurement is carried out without contact using ultrasonic technology, in the range from \u003cb\u003e0.1 to 5 m.\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eThe device connects \u003cb\u003edirectly to a 2.4 GHz Wi-Fi network,\u003c\/b\u003e so \u003cb\u003eno additional gateway is required for its operation.\u003c\/b\u003e The sensor requires \u003cb\u003econstant mains power using the power supply included in the kit.\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eOnce you add the device to the \u003cb\u003eTuya \/ Smart Life\u003c\/b\u003e app, you can remotely check the liquid level, view measurement history, and set minimum and maximum level alarms.\u003c\/p\u003e \u003cp\u003eThe sensor also has \u003cb\u003ea built-in audible alarm\u003c\/b\u003e , the operating time of which can be set from 1 to 60 minutes. This allows it to warn of too low or too high liquid levels both locally and via the app.\u003c\/p\u003e\u003ch2\u003eKey information\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\u003cb\u003eWiFi 2.4 GHz communication – without additional gate\u003c\/b\u003e\u003c\/li\u003e \u003cli\u003eSupport for \u003cb\u003eTuya \/ Smart Life\u003c\/b\u003e app\u003c\/li\u003e \u003cli\u003eWireless measurement of liquid level in \u003cb\u003e0,1 – 5 m\u003c\/b\u003e tanks\u003c\/li\u003e \u003cli\u003eUltrasonic measurement \u003cb\u003ewithout sensor contact with liquid\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eLiquid level displayed in %\u003cb\u003e and meters\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eRemote view of liquid level and temperature in the application\u003c\/li\u003e \u003cli\u003eMinimum and maximum liquid level alarm\u003c\/li\u003e \u003cli\u003eAdjustable \u003cb\u003esound alarm\u003c\/b\u003e with operating time from \u003cb\u003e1 to 60 minutes\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003ePossibility to separately turn on or off the minimum and maximum level alarm\u003c\/li\u003e \u003cli\u003eAlarm history and liquid level charts in the application\u003c\/li\u003e \u003cli\u003eConstant mains power supply – \u003cb\u003epower supply is included\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eThe cable coming out of the sensor to connect the power supply is approx. \u003cb\u003e180 cm\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eThe power supply cable is approx. \u003cb\u003e90 cm\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eInstallation requires making a \u003cb\u003ehole in a tank with a diameter of approx.\u003c\/b\u003e \u003cb\u003e55 mm\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eSensor designed for water and other \u003cb\u003enon-aggressive liquids\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eConnection of sensor cable with \u003cb\u003e power supply is not waterproof\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eDegree of sensor protection: \u003cb\u003eIP65\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eOperating temperature: \u003cb\u003efrom −20°C to +70°C\u003c\/b\u003e\n\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e \u003cp\u003eThe sensor measures \u003cb\u003e80 × 80 × 41 mm.\u003c\/b\u003e Installation requires a hole with a diameter of about \u003cb\u003e55 mm at the top of the tank. \u003c\/b\u003e The sensor shall be mounted above the surface of the liquid so that its measuring part is directed vertically downwards and does not come into contact with water.\u003c\/p\u003e \u003cp\u003eThe cable coming out of the sensor has a length of about 180 cm, while the power supply cable is about \u003cb\u003e90 cm.\u003c\/b\u003e The connection of the sensor cable with the\u003cb\u003e power supply is not waterproof\u003c\/b\u003e, so it should be in a dry place, protected from moisture and precipitation.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e \u003cp\u003eBefore making the mounting hole, we recommend connecting the sensor to the power supply and adding it to the \u003cb\u003eTuya Smart app near the router.\u003c\/b\u003e Then move the device to the planned installation location and check whether the connection to the \u003cb\u003eWiFi 2.4 GHz \u003c\/b\u003e network is stable. Only after confirming the appropriate WiFi coverage, we recommend starting installation in the tank.\u003c\/p\u003e \u003cp\u003eThe sensor is mounted\u003cb\u003e from the top of the tank. \u003c\/b\u003e For its installation, a mounting hole with a diameter of about \u003cb\u003e55 mm should be made.\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eInstallation of the device:\u003c\/p\u003e \u003cul\u003e \u003cli\u003emake a hole in the upper part of the tank,\u003c\/li\u003e \u003cli\u003eplace the mounting pad,\u003c\/li\u003e \u003cli\u003eembed the sensor in the prepared hole,\u003c\/li\u003e \u003cli\u003escrew the sensor to the surface of the tank,\u003c\/li\u003e \u003cli\u003econnect the sensor cable to the power supply cable,\u003c\/li\u003e \u003cli\u003eConnect the power supply to the mains socket.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe cable coming out of the sensor has a length of about \u003cb\u003e180 cm\u003c\/b\u003e, while the power supply cable about \u003cb\u003e90 cm\u003c\/b\u003e, which makes it easier to bring power to the installation site. The connection of the sensor cable with the \u003cb\u003e power supply is not waterproof\u003c\/b\u003e and should be placed in a dry place, protected against water, moisture and precipitation.\u003c\/p\u003e\u003ch2\u003eImportant information during installation\u003c\/h2\u003e \u003cp\u003eThe sensor must be mounted \u003cb\u003eperpendicular to the surface of the liquid, \u003c\/b\u003eso that the measurements are correct.\u003c\/p\u003e \u003cp\u003eThe best place to install is the \u003cb\u003ecentral part of the tank\u003c\/b\u003e, away from inlets, liquid drains and other elements that may cause measurement interference, the so-called. pseudo-echo.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eDo not mount the sensor too close to tank walls, pipes, floats or other obstacles.\u003c\/b\u003e Elements in the measuring field can reflect ultrasonic waves and cause erroneous or unstable readings.\u003c\/p\u003e \u003cp\u003eThe inside of the tank should be \u003cb\u003eas smooth as possible and devoid of protruding structural elements\u003c\/b\u003e in the measuring area.\u003c\/p\u003e \u003cp\u003eThe beam measurement angle is approximately \u003cb\u003e±15°\u003c\/b\u003e. There should be no obstacles in this area, along the entire road between the sensor and the surface of the liquid.\u003c\/p\u003e \u003cp\u003eMinimum recommended tank dimensions:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eat a height of \u003cb\u003eH = 5 m\u003c\/b\u003e – diameter or width \u003cb\u003eD \u0026gt; 2,7 m\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eat height\u003cb\u003e H = 4 m –\u003c\/b\u003e diameter or width\u003cb\u003e D \u0026gt; 2 m\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eat height\u003cb\u003e H = 3 m \u003c\/b\u003e– diameter or width \u003cb\u003eD \u0026gt; 1,6 m\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eat a height of \u003cb\u003eH = 2 m \u003c\/b\u003e– diameter or width \u003cb\u003eD \u0026gt; 1,1 m\u003c\/b\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIn the case of mounting on a slightly curved surface, the sensor should be screwed stably, but without excessive tensioning of its housing. If unusual or unstable readings appear after installation, it is worth slightly loosening the mounting screws and checking the indications again.\u003c\/p\u003e\u003ch2\u003eTuya App Main Screen\u003c\/h2\u003e \u003cp\u003eOn the app's main screen, you can quickly check the **current liquid level in percentage and meters**, its status, and a graph of previous measurements. The clear tank graphic makes it easy to assess the fill level.\u003c\/p\u003e \u003cp\u003eWhen the set minimum or maximum is exceeded, the app displays information about **too low or too high liquid levels**, and the sensor activates an audible alarm. Its duration can be set from **1 to 60 minutes.**\u003c\/p\u003e \u003cp\u003eHowever, you don't have to let the alarm run for the full set time – you can **quickly silence it with a single button directly on the app's main screen.**\u003c\/p\u003e\u003ch2\u003eMeasurement and Alarm History\u003c\/h2\u003e \u003cp\u003eThe app saves the **history of liquid levels and alarms**, allowing you to easily check past events and analyze changes in the tank.\u003c\/p\u003e \u003cp\u003eAvailable features include:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eLiquid level graphs broken down by **day, month, and year**,\u003c\/li\u003e \u003cli\u003eHistory of minimum and maximum liquid level alarms,\u003c\/li\u003e \u003cli\u003eExact date and time for each recorded event,\u003c\/li\u003e \u003cli\u003eQuick view of recent notifications directly on the app's main screen.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe measurement history makes it easier to observe liquid level changes over longer periods, monitor consumption, and detect unusual drops or increases that could indicate, for example, a leak, excessive use, or a tank filling problem.\u003c\/p\u003e\u003ch2\u003eSensor Settings in the App\u003c\/h2\u003e \u003cp\u003eIn the **Tuya Smart app settings**, you can customize how the sensor and alarms operate based on your tank's height and fill level.\u003c\/p\u003e \u003cp\u003eAvailable settings:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e**Set Max** – the maximum liquid level in percentage, which can trigger an alarm when exceeded.\u003c\/li\u003e \u003cli\u003e**Set Mini** – the minimum liquid level in percentage, below which an alarm can be triggered.\u003c\/li\u003e \u003cli\u003e**Alarm Time** – the duration of the audible alarm, adjustable from **1 to 60 minutes.**\u003c\/li\u003e \u003cli\u003e**Upper Switch** – enables or disables the maximum liquid level alarm.\u003c\/li\u003e \u003cli\u003e**Lower Switch** – enables or disables the minimum liquid level alarm.\u003c\/li\u003e \u003cli\u003e**Installation Height** – the distance from the sensor's measurement surface to the bottom of the tank.\u003c\/li\u003e \u003cli\u003e**Liquid Maximum Depth** – the maximum liquid depth, meaning the height of the liquid column when the tank is at maximum capacity.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eCorrectly setting the **Installation Height** and **Liquid Maximum Depth** parameters is essential for the app to accurately calculate and display the liquid level in percentages and meters.\u003c\/p\u003e\u003ch2\u003eAdding the Device to the App\u003c\/h2\u003e \u003cp\u003eThe sensor connects **directly to a 2.4 GHz WiFi network**, so it does not require an additional gateway. Before installation, we recommend adding the device to the **Tuya Smart app near your router**, and then checking the Wi-Fi signal strength at the planned installation location.\u003c\/p\u003e \u003cp\u003eTo add the sensor to the app:\u003c\/p\u003e \u003col\u003e \u003cli\u003eConnect the sensor to power.\u003c\/li\u003e \u003cli\u003eOpen the Tuya \/ Smart Life app.\u003c\/li\u003e \u003cli\u003eTurn on **Bluetooth** on your phone and connect to a **2.4 GHz WiFi network.**\u003c\/li\u003e \u003cli\u003eLocate the pairing mode button on the **bottom of the device.**\u003c\/li\u003e \u003cli\u003eGently press and hold the button for about **5–7 seconds** until the indicator light starts flashing.\u003c\/li\u003e \u003cli\u003eIn the app, select the option to add a new device.\u003c\/li\u003e \u003cli\u003eSelect the detected sensor and follow the on-screen instructions.\u003c\/li\u003e \u003c\/ol\u003e \u003cp\u003eThe sensor does not support direct connection to a **5 GHz WiFi network**. If your router broadcasts both bands, the device must have access to the **2.4 GHz network** during configuration.\u003c\/p\u003e\u003ch2\u003eCreating Smart Scenes\u003c\/h2\u003e \u003cp\u003eThe sensor can act as a trigger for smart scenes in the \u003cb\u003eTuya Smart app.\u003c\/b\u003e Automation can be started after changing the liquid level state, e.g. After reaching the set minimum or maximum.\u003c\/p\u003e \u003cp\u003eExamples of applications:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eswitching on the pump after detecting too low liquid level,\u003c\/li\u003e \u003cli\u003eswitching off the pump after reaching the maximum level,\u003c\/li\u003e \u003cli\u003eactuation of a smart socket, relay, valve or other actuator,\u003c\/li\u003e \u003cli\u003eActivation of an additional siren or warning light.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eTo create a scene, in the app, select\u003cb\u003e When device status changes, \u003c\/b\u003eindicate the sensor and condition, e.g. \u003cb\u003eUpper level alarm,\u003c\/b\u003e and then select the action to perform the compatible device.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eThe sensor does not have a built-in relay and does not control the pump directly. \u003c\/b\u003e Automatic filling or emptying of the tank requires an additional actuator added to the same application \u003cb\u003eTuya Smart, \u003c\/b\u003eeg. intelligent relay or outlet selected for pump parameters.\u003c\/p\u003e\u003ch2\u003eTechnical parameters\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eManufacturer: \u003cb\u003eSone Smart One\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eDevice type:\u003cb\u003e WiFi liquid level sensor\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eMeasurement method: \u003cb\u003eultrasonic\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eCommunication: \u003cb\u003eWiFi 2.4 GHz\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eRequired gateway:\u003cb\u003e not\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eSupported application: \u003cb\u003eTuya \/ Smart Life\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eLiquid level measurement range:\u003cb\u003e 0,1 – 5 m\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eMeasurement accuracy: \u003cb\u003e±0,02 m\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eAngle of measuring beam: approximately \u003cb\u003e±15°\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eHow to present the level\u003cb\u003e: percentages and meters\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eOperating temperature:\u003cb\u003e from −20°C to +70°C\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eMinimum liquid level alarm: \u003cb\u003eyes\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eMaximum liquid level alarm: \u003cb\u003eyes\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eBuilt-in audible alarm: \u003cb\u003eyes\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eAlarm time adjustment: \u003cb\u003e1 – 60 minutes\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eAbility to quickly mute the alarm in the application: \u003cb\u003eyes\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eHistory of measurements: \u003cb\u003eyes\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eLiquid level charts: \u003cb\u003eday \/ month \/ year\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eAlarm history: \u003cb\u003eyes\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eAutomation in Tuya app: \u003cb\u003eyes\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eDirect pump control: \u003cb\u003enot\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003ePower supply: \u003cb\u003econstant mains power supply via the power supply included\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eLength of the cable coming out of the sensor: about \u003cb\u003e180 cm\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003ePower supply cable length: about \u003cb\u003e90 cm\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eDegree of sensor protection: \u003cb\u003eIP65\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eWaterproof cable connection with power supply:\u003cb\u003e not\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eSensor dimensions:\u003cb\u003e 80 × 80 × 41 mm\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eMounting hole diameter required: approximately\u003cb\u003e 55 mm\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eInstallation method:\u003cb\u003e from the top of the tank\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003ePurpose: \u003cb\u003ewater and other non-aggressive liquids\u003c\/b\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e\u003ch2\u003eContents of the set\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eLiquid level sensor WiFi Sone Smart One\u003c\/li\u003e \u003cli\u003eAC adapter for sensor\u003c\/li\u003e \u003cli\u003eWasher \/ mounting gasket\u003c\/li\u003e \u003cli\u003eMounting elements\u003c\/li\u003e \u003cli\u003eUser manual in English\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eApplication and ecosystem TUYA and SMART LIFE\u003c\/h2\u003e \u003cp\u003eThe device works with Tuya Smart and Smart Life – one of the most popular applications for IoT devices (Internet of Things). Adding devices is simple: just hold down the button on your device and search for it in the app.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eWhy choose Tuya and Smart Life?\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cb\u003ePolish interface:\u003c\/b\u003e The application works in Polish, which facilitates operation.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eWide compatibility:\u003c\/b\u003e Works with more than 310 000 devices from nearly 10 000 manufacturers.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003e Versatility:\u003c\/b\u003e Lighting, monitoring, air conditioning, heating and many more - up to 30 categories of devices.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eFree and regularly updated:\u003c\/b\u003e The application is free and constantly developed with new features.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eAvailability:\u003c\/b\u003e It can be downloaded to iOS and Android devices.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eIntuitive operation:\u003c\/b\u003e Simple and easy to use interface.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003eTypes of communication:\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cb\u003eWiFi\u003c\/b\u003e: Works without additional gateways, only WiFi connection (2,4GHz) is required.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eZigBee\u003c\/b\u003e: Requires a ZigBee gateway, it relieves the WiFi router and provides a stable connection. Thanks to ZigBee communication, we extend the life of products powered by batteries. These devices can communicate with each other even in the absence of a WiFi connection.\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGroup\u003c\/th\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003enew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eInvoice\u003c\/td\u003e\n\u003ctd\u003eWith VAT invoice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eSensor type\u003c\/td\u003e\n\u003ctd\u003eother\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eCzujnik poziomu cieczy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003emains\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCommunication\u003c\/td\u003e\n\u003ctd\u003eWiFi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eProduct weight with unit packaging\u003c\/td\u003e\n\u003ctd\u003e0.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eManufacturer code\u003c\/td\u003e\n\u003ctd\u003eSB1755\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eEAN (GTIN)\u003c\/td\u003e\n\u003ctd\u003e5908076830468\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003ePackaging status\u003c\/td\u003e\n\u003ctd\u003eoriginal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBatteries included\u003c\/td\u003e\n\u003ctd\u003eno\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCertificates of conformity\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eAdditional features\u003c\/td\u003e\n\u003ctd\u003eaudible alarm,for external use,WiFi connection,operating below 0°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"SmartBudynek_pl","offers":[{"title":"Default Title","offer_id":54077030891867,"sku":"18836545492","price":70.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9355\/4523\/files\/WiFi-Tuya-ultrasonic-water-level-sensor-for-tank-0-5m.jpg?v=1789553881","url":"https:\/\/homy.lt\/products\/ultragarsinis-vandens-lygio-jutiklis-bakui-wifi-tuya-0-5-m","provider":"homy.lt","version":"1.0","type":"link"}