Akumulatoru lādētājs 12V/10A 24V/5A LiFePO4, AGM regenerācijai

Trumpai apie prekę

Prekė: Akumuliatorių įkroviklis 12V/10A 24V/5A LiFePO4, AGM regeneracijai. Kategorija: Baterijų įkrovikliai.

• Gamintojas: Powermat

Charge your car or motorcycle battery without constantly adjusting the parameters. The Powermat PM-PM-10MN combines automatic charging control, tailored programs and a clear screen, making it easy to take care of the battery in your own garage.

• 10 A at 12 V, 5 A at 24 V — Charging current depending on battery voltage.
• 5 work programs — You can adjust the charging method to the battery and task.
• Microprocessor automation — Fewer manual adjustments throughout the charging process.
• LCD display — Quickly check the operating status and selected program.

🟠 MICROPROCESSOR — CHARGING WITHOUT CONSTANT ADJUSTMENT

Take care of the battery without manually correcting the next phases of charging. Microprocessor control and PWM pulse technology carry out the process according to the selected program. Pre-charging starts with a very discharged small current battery, and subsequent phases include constant current charging and maintaining voltage with a gradual reduction in current.

Battery health check checks voltage maintenance and the correct course of the process. Compensatory charging takes into account the battery status or temperature, and the support replenishes the energy after charging when needed. You get automatic loading care instead of constantly adjusting settings.

🟠 FIVE PROGRAMS – FIT FOR THE BATTERY

Different batteries require an adequate charging method. The PM-PM-10MN rectifier offers AUTO, AGM/GEL, WET, MOTO and REPAIR modes, so you can handle a variety of garage tasks with one device. The touch button simplifies the selection, and separate LEDs allow you to quickly recognize the active program.

AGM/GEL also includes EFB, including batteries used in cars with Start/Stop system. WET is designed for classic lead-acid batteries with liquid electrolyte. Separate programs make it easy to match the charging to the battery design, rather than using a single setting for each task.

Supported lead-acid batteries: WET, MF, CA, EFB, GEL and AGM

Lithium batteries: LiFePO4 support; Lithium-ion batteries not allowed

Special battery program: 10 – 100 Ah at 12 V and 10 – 100 Ah at 24 V

🟠 LCD DISPLAY — OPERATING STATUS IN VIEW

Readable LCD screen allows you to check the rectifier indications without reaching for an additional device. The large numbers and graphical charge indicator make it easy to read quickly while working in the garage.

The central position of the screen and the contrasting bezel bring together the most important information in one place. Just look at the panel to check the current charging status.

🟠 SEASONAL MODES – TEMPERATURE-MATCHED AUTOMATION

Changing the temperature in the garage does not require manual switching of the seasonal mode. The rectifier automatically adjusts the voltage and charging current to ambient conditions.

• Winter mode below 10°C — adjusting parameters during colder days.
• Summer mode above 28°C — automatic correction at higher temperature.

Thanks to this, you benefit from charging taking into account seasonal conditions, without additional adjustment on your part.

🟠 MOTO PROGRAM — CARE FOR THE TWO-WHEELER BATTERY

A separate motorcycle program allows you to use the same rectifier also for a two-wheeler battery. Automatic resumption of charging after a voltage drop helps maintain its charge between consecutive passes.

Motorcycle program: 12 V batteries with a capacity of 2 to 20 Ah

🟠 CHARGE INDICATION – CLEAR FINALE OF WORK

The screen control is complemented by sound full charge signaling, repeated every minute. It is easier to notice the end of charging even when you are doing other work in the garage.

🟠 TAKE CARE OF THE BATTERIES IN YOUR GARAGE

From recharging your car’s battery to caring for your motorcycle between rides, the PM-PM-10MN rectifier helps you take care of the energy supply in your vehicles yourself.

• Daily operation of the car — You will replenish the battery energy, also in a vehicle with a Start/Stop system, using a program tailored to its design.
• Preparing your two-wheeler for riding — You can charge your motorcycle’s battery before your next runs without reaching for a separate rectifier.
• Vehicle interruption — Maintenance of the charge makes it easier to take care of the battery when the car or motorcycle stays in the garage longer.

🟠 IMPULSE REPAIR – ADDITIONAL POSSIBILITY OF REGENERATION

When the lead-acid battery cannot be recharged with a regular program, you can use the REPAIR mode. This is a separate function designed to attempt reconditioning, extending the rectifier's capabilities beyond standard charging.

Short current pulses support desulfurization, helping to break down lead sulfate crystals on plates. You gain the opportunity to try to improve the condition of the battery using the same device.

🟠 EASY-TO-READ PANEL – YOU CAN EASILY FIND THE RIGHT MODE

Polish descriptions and an ordered row of controls facilitate orientation on the panel. The checkbox is clearly separated from the screen, so that even after a long break you will quickly find the function you need.

🟠 SUPPORT – CHARGED BATTERY ALSO WHEN STATIONARY

A break in the use of the vehicle does not necessarily mean giving up taking care of its battery. Backup function provides little current when fully charged when needed, helping to preserve energy reserve during longer standstills.

🟠 SAFEGUARDS — AUTOMATIC RESPONSE TO IRREGULARITIES

The rectifier not only controls charging, but also responds to incorrect working conditions. Protective functions combine automatic process stop with clear signaling, making it easier to identify the cause of the break.

• Thermal protection — stops charging when the device overheats.
• Short-circuit protection — interrupts operation and triggers an audible signal at short-circuit.
• Polarity control — informs about the reverse connection of terminals on the screen and an audible alarm.

The automatic shutdown feature complements this set of solutions. You get process control and quick information when charging requires your attention.

🟠 WHY IS IT WORTH BUYING THIS RECTIFIER?

The PM-PM-10MN rectifier combines daily charging, battery care during standstill and the possibility of impulse regeneration. You gain practical garage equipment that takes over the process adjustment and does not take up much space.

• One rectifier for different tasks — The selection of programs allows you to take care of the batteries of the car and motorcycle without completing separate devices for each vehicle.
• Less time when adjusting — Microprocessor control and automatic seasonal modes take over the parameter correction, and the screen allows you to quickly check the workflow.
• Support also between trips — The combination of charging and backup helps to take care of the battery both with regular use of the vehicle and during standstill.
• Practical equipment for your own garage — The lightweight body is easy to move and hide, keeping the charging device and impulse regeneration attempt handy.

🟠 TECHNICAL DATA

• Power supply voltage: 230 V AC
• Power frequency: 50 Hz
• Power: 180 W
• Maximum charging current at 12 V: 10 A
• Maximum charging current at 24 V: 5 A
• Maximum output voltage for 12 V battery: 15,5 V DC
• Maximum output voltage for 24 V battery: 31 V DC
• Efficiency: 98%
• Electrical protection class: II
• Housing protection rating: IP65
• Dimensions of the device (length × W × H ): 16 × 6,5 × 9,5 cm
• Power cord length: 80 cm
• Length of charging cables: 55 cm

🟠 EQUIPMENT OF THE SET

• Powermat PM-PM-10MN rectifier
• User manual
• Original packaging

🟠 CROCODILE CLAMPS – COMFORTABLE GRIP AND CLEAR MARKINGS

Spring jaws keep in contact with the battery pole, and profiled covers make it easy to grip the clamps. The red and black colors allow you to quickly distinguish between wires, simplifying the preparation of the battery for charging.

🟠 FAQ FREQUENTLY ASKED QUESTIONS

◾ Is the rectifier suitable for batteries in cars with Start/Stop system?

Yes. The AGM/GEL program supports VRLA AGM/GEL and EFB batteries, also used in vehicles with the Start/Stop system.

◾ Are cables with terminals included?

Yes, the rectifier comes with a pair of charging wires terminated with a red and black crocodile clamp. The set also includes a cable with a mains plug.

◾ What is the REPAIR program for?

It is used for impulse reconditioning of the battery, which cannot be charged with an ordinary program. Pulses support the desulphurisation of lead-acid battery plates.

◾ Can lithium-ion batteries be charged?

No. This rectifier must not charge lithium-ion batteries.

Specifications