Akumulatoru lādētājs MW Power MW-SC8E, 12V 1A/4A/8A, 24V 1A/4A

Trumpai apie prekę

Prekė: Akumuliatorių įkroviklis MW Power MW-SC8E, 12V 1A/4A/8A, 24V 1A/4A. Kategorija: Baterijų įkrovikliai.

• Gamintojas: MW Power
• Modelis: MW-SC8E

Features

• Suitable for 12V and 24V lead-acid batteries wet, gel and AGM
• Battery capacity: 1.2Ah – 240Ah(12V), 1.2Ah-120Ah (24V)
• Security: Short-circuit / Overvoltage
• Selectable charging current: 1A/4A/8A (12V), 1A/4A (24V)
• LCD display, user-friendly interface, microprocessor controlled
• Battery status detection, desulphurisation mode

Application

• Cars, quads, boats, lawn mowers, motorcycles, jet skis and snowmobiles

Electrical specification

Input:

• Input voltage 220-240V (50Hz)
• Input current (max.) 0.75A/230VAC

Output:

• Output voltage (max.) 14.7V; 29.4V
• Output current for 12V – 1A / 4A / 8A (selectable); for 24V – 1A / 4A (selectable)
• Output power (max.): 96W
• Efficiency (Typ. ): 80%

Security:

• Overvoltage: ›16VDC (12V mode), ›32V (24V mode), output voltage disconnection
• Short-circuit: Disconnection of output voltage, information on display

Working environment:

• Operating temperature -5°C ÷ + 40°C
• Operating humidity 20-90% (relative humidity, non-condensing)
• Storage temperature and humidity -10°C ÷ 60°C, 10 ÷ 95% (relative humidity, non-condensing)

Safety and electromagnetic compatibility standards:

• Safety standards EN 60335-2-29:2004 + A2:2010; EN 60335-1:2012 + A11:2014
• Standards EMC EN 55014-1 , EN 61000-3-3, EN 55014-2, EN 61000-3-3, EN-61000-3-2

Other:

• Dimensions: length: 218mm; width: 89mm; height: 49mm
• Weight (net/gross): 0,644kg/0.808kg

Description of charging phases

1. Initialization - Check the battery status to determine the appropriate charging mode. If the battery is deeply discharged, the device will start regenerative charging.

2. Low current charging – Starting low current charging to heat the battery before the constant current charging process.

3 - 6. Constant current charging – Maximum current charging up to approximately 85% of the capacity.

7. Constant voltage charging – Charging up to about 95% of the capacity with a gradual reduction in current to increase battery life.

8. Resting charging – Completion of the charging process. Getting the maximum possible battery capacity.

9. Analysis Checking whether the battery maintains its capacity. At this stage, the charger can start the desulphurisation process for batteries in poor condition.

10. Maintenance – Monitoring the battery status. If the voltage drops below the threshold value, the charger will restart to keep the battery fully charged.

Additional modes

Recovery mode

The process of regeneration of heavily discharged or sulphurized batteries by low current impulse charging - concerns restorative charging. This mode is activated automatically (when the battery is deeply discharged).

Desulfurization mode

Recovery of the capacity of sulphurized batteries by charging with increased voltage breaking down sulphur crystals located on the electrodes - applies to restorative charging. This mode is switched on after the Analysis, in case the battery does not hold the charge.

Specifications