Alyvos šildytuvas LEHMANN, 30 kW, patalpoms iki 420 m²

Trumpai apie prekę

Prekė: Alyvos šildytuvas LEHMANN, 30 kW, patalpoms iki 420 m². Kategorija: Oro šildytuvai.

• Gamintojas: Lehmann
• Modelis: LTOHO-3023

❄ Cold shouldn’t decide if you can work normally today

Cool workshop. A chilled garage. A hall where it is difficult to start work in the morning. A room that needs to be heated up quickly before the next task.

The problem is not the temperature itself.

The problem is discomfort, slower start, downtime and the need to adjust your work to the ambient conditions.

🔥 Lehmann Avant 30 kW helps to reverse this situation.

It is a powerful oil heater designed to quickly deliver a large amount of heat to the space where it is really needed.

You are not waiting for better conditions. You create them yourself. 💪

At the heart of the Lehmann Avant is 30 kW of heating power.

This level is designed for larger spaces and situations where a small heater simply is not enough.

The manufacturer specifies the recommended heating area for:

🏭 320 – 420 m²

Thanks to this Avant can be a practical solution for m.in. in larger technical rooms, workshops, garages, halls and other spaces suitable for oil heaters with direct combustion.

One device. Large area of operation. More freedom in the organization of work. ✅

High heating power gives the best effect when the heated air is effectively distributed.

Therefore, Lehmann Avant provides air flow up to:

💨 720 m³/h

The 230 W fan equipped with 5 propellers is responsible for its movement.

The effect?

The heat should not remain concentrated only at the device – the intense flow helps to distribute them throughout the heated space.

This is especially important where it is not just having a heat source that counts, but improving the comfort of work as quickly as possible. 🔥

In the case of a workshop or hall, time counts.

Every minute you spend waiting for conditions to become comfortable is a minute you don’t use for the right job.

That is why Avant combines:

🔥 30 kW heating power

z

💨 air flow 720 m³/h.

It's a combination focused on one thing:

🚀 quickly deliver a lot of heat where it is needed.

So you’re not just buying another device.

You buy the ability to create conditions in which you can operate normally faster.

Real comfort begins when the equipment requires less attention from you.

Lehmann Avant is equipped with:

🌡 thermostat and temperature display.

So you can more easily control the operating conditions of the device and observe the temperature without guessing what is happening in the heated space.

✅ Less constant checking.

✅ More controls.

✅ More time for what you really came to the workshop, garage or hall for.

Avant is equipped with a fuel tank with a capacity of:

⛽ 22 liters

Fuel consumption according to specifications is:

📊 2,4 kg/h

The large tank has been adapted to the nature of the device designed for intensive heating of larger spaces.

And that means exactly what you expect from good equipment:

is supposed to help you do your job instead of constantly distracting you from it. 💪

Lehmann Avant is a diesel-powered oil heater.

It uses direct combustion mode, thanks to which the device is aimed at intensive heat delivery to appropriate work and technical spaces.

This is a solution for people who do not need a decorative device for the living room.

They need equipment to do a specific job.

🔥 Enable. Heat. Allow us to continue.

Imagine a winter morning.

You walk into a cold workshop. The tools are cold, the air is unpleasant, and your first thought is:

"First, I need to warm this place up somehow."

Avant changes that.

Instead of treating the cold as a constant part of your day, you can actively create more comfortable working conditions for yourself.

This is the real value of a good heater.

Not the temperature listed in the specifications.

Not just the number of kilowatts.

But what you can do with them. 💪

Increasingly, we expect more from the workplace than just the ability to complete a task.

We want a space where you can work comfortably, efficiently and without unnecessary burden resulting from environmental conditions.

Therefore, heating of a workshop, hall or garage does not have to be treated as an addition.

It can be part of a well-organized workplace.

🔥 Lehmann Avant helps to create a space where a person does not have to fight temperature before he starts fighting the right task.

A large heater should not be a device tied to one place.

The Lehmann Avant weighs 15,4 kg and is equipped with two wheels with a diameter of 19,7 cm and an axle.

Thanks to this, the design has been prepared for easier movement of the device between places where you currently need a heat source.

• 🔧 Workshop today.
• 🏭 Tomorrow another part of the hall.
• 🚗 Later garage or workspace.

This heat is supposed to follow your needs, not the other way around. 🔥

The device with a power of 30 kW should also be prepared for operational safety.

That is why the Lehmann Avant is equipped with:

🛡 overheating protection, the system will start when the temperature exceeds the maximum operating level

🛡 protection against low fuel levels, detects when there is not enough ON (heating oil) and turns off the burner so that it does not work in the absence of fuels

🛡 electrical protection against too much current

This solution increases control over the operation of the device and provides an additional protective element when using the heater.

Avant does not pretend to be a delicate home appliance.

Its housing is made of cold-rolled SPCC carbon steel.

It is a material that corresponds well to the utilitarian nature of equipment intended for technical and working spaces.

The construction is to look professional, but above all be prepared to do your job. 💪

The heater can be particularly useful when heating appropriate, ventilated usable spaces, such as:

• 🔧 workshop – when you want to prepare a comfortable workstation faster in winter,
• 🚗 garages – during repairs, car servicing and work carried out in cold months,
• 🏭 halls and larger workspaces – when you need a strong, mobile heat source,
• 🧰 economic and technical rooms – during periodic work requiring improvement of thermal conditions,
• 🏗 renovation and construction works – when the ambient temperature makes it difficult to perform tasks comfortably,
• 📦 warehouses and technical facilities – in places suitable for devices with direct combustion.

One heater can therefore respond to many situations in which the common problem is always the same:

❄ it is too cold to work comfortably.

• 🔥 30 kW heating power
• High power designed for heating larger spaces.
• 🏭 Recommended area 320 – 420 m²
• A solution aimed at large utility rooms.
• 💨 720 m³/h airflow
• Intensive distribution of heated air.
• ⚙ Fan 230 W
• Promotes effective air circulation.
• 🌀 5 fan propellers
• Design prepared for efficient air flow.
• 🌡 Thermostat
• Greater control over the operating conditions of the device.
• 📟 Temperature display
• Quick access to temperature information.
• ⛽ Tank 22 l
• Large capacity adapted to the nature of the heater.
• 📊 Fuel consumption 2,4 kg/h
• A clearly defined parameter to better plan operation.
• 🛞 Wheels 19,7 cm
• Easier movement of the device between stations.
• 🛡 Overheating protection
• Additional protection during operation of the device.

Because good equipment should not require you to reorganize the whole day.

He should be solving the problem.

• 🔥 Is it cold? – you deliver 30 kW of power.
• 🏭 Is there a large space? – you have a flow rate of 720 m³/h and a recommended area of up to 420 m².
• 🌡 Do you want to constantly control the device? - you have a thermostat and temperature display.
• 🛞 Do you need to change jobs? - you use a mobile design on wheels.

This is the philosophy of Lehmann Avant:

🔥 less adaptation to conditions. More control over your own space.

• Brand: Lehmann
• Model: Avant
• Type: oil heater
• SKU: LTOHO-3023
• 🔥 Heating power: 30 kW
• 🏭 Recommended heating area: 320 – 420 m²
• 🌡 Temperature control 5 to 55 *C
• ⛽ Type of fuel: Diesel
• 🔥 Combustion mode: direct
• 📊 Fuel consumption: 2,4 kg/h
• ⛽ Fuel tank capacity: 22 l
• 💨 Air flow: 720 m³/h
• ⚙ Fan power: 230 W
• 🌀 Number of fan propellers: 5
• 🌡 Termostat: yes
• 📟 Temperature display: yes
• 🛡 Protection against overheating, low fuel levels and electrical protection
• ⚡ Voltage: 220 – 240 V
• ⚡ Frequency: 50 Hz
• 🔊 Noise level: 76 dB
• 🔌 Cable length: 1,25 m
• 🔌 Cable type: H05RN-F 3G0,75 mm²
• 🔩 Housing material: SPCC cold rolled carbon steel
• ⚖ Weight of the device: 15,4 kg
• 📐 Device dimensions: 78,5 × 42 × 54 cm
• 🛞 Wheel diameter: 19,7 cm

• 🔥 Lehmann Avant heater,
• 🛞 2 wheels,
• ⚙ wheel axle,
• 📖 instruction manual.

The heater is only a means.

The real product is the warm workshop before starting work.

🔧 The possibility of completing the planned task despite the winter morning.

👷 Greater comfort during long hours of work.

⏱ Less time spent fighting conditions.

And that’s why the Lehmann Avant 30 kW was created.

🔥 Instead of waiting for it to get warmer – create conditions for yourself to act.

Lehmann Avant. High power when the cold ceases to be a minor inconvenience and begins to interfere with work.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Lehmann
Parametry	Kind	oil
Parametry	Heating power	30 kW
Parametry	Model	LTOHO-3023
Parametry	Product weight with unit packaging	15.4 kg
Parametry	Manufacturer code	5903754421761
Parametry	Packaging status	original
Parametry	Energy efficiency class	A
Parametry	Range of energy efficiency classes	A++ - G