Antena DVB-T2 COMBO MUX8 4K LTE su stiprintuvu, aktyvi, skaitmeninei antžeminei TV

Trumpai apie prekę

Prekė: Antena DVB-T2 COMBO MUX8 4K LTE su stiprintuvu, aktyvi, skaitmeninei antžeminei TV. Kategorija: Antenos.

• Gamintojas: TAMDEL
• Modelis: TAZ-26 + WZMACNIACZ + ZASILACZ
• Spalva: silver

▶ The 20 dB antenna amplifier helps to improve reception in places with weaker signal.

▶ 12 V power supply included — antenna ready for operation when connected.

▶ Receives MUX-1 / MUX-2 / MUX-3 / MUX-4 and MUX-8.

▶ The extensive VHF directors section supports MUX-8 reception and helps improve signal stability.

✅ The most important advantages of the TAMDEL TAZ-26 antenna (with amplifier)

▶ Directional COMBO design — VHF + UHF band.

▶ Reception range up to 200 km — under favorable conditions and with the correct antenna setting.

▶ Supports MUX-1 / MUX-2 / MUX-3 / MUX-4 and MUX-8 — also in vertical polarization.

▶ 20 dB amplifier and 12 V power supply — set ready to connect.

▶ Aluminum construction adapted for external installation.

✅ DVB-T2 / HEVC / 4K – compliant with the current standard

▶ Supports DVB-T / DVB-T2 with H.265 / HEVC compression.

▶ Allows you to receive channels in Full HD and 4K quality if they are broadcast in a given location.

▶ A TV or set-top box supporting this standard is required to receive DVB-T2/HEVC.

✅ LTE filter – less signal interference

▶ Built-in LTE filter reduces interference from mobile networks, including LTE 800 MHz.

▶ Can be helpful near buildings, GSM masts and base stations.

✅ Simple installation

▶ All mounting hardware is matched to the antenna.

▶ Assembly of the antenna is simple and does not require specialized tools.

✅ How to connect an antenna with an amplifier – step by step

▶ Mount the antenna outside — preferably as high as possible, e.g. on the mast, balcony or facade.

▶ Set the antenna to the nearest DVB-T / DVB-T2 transmitter.

▶ Connect the 20 dB antenna amplifier to the antenna output.

▶ Then connect the antenna cable.

▶ At the end of the cable, mount the 12 V power supply with separator and connect it to electricity.

▶ Connect the output from the separator to the TV or DVB-T2 decoder.

▶ Run automatic DVB-T / DVB-T2 channel search.

✅ How to set up an antenna to receive MUX-8

The TAMDEL TAZ-26 antenna has two independent reception paths:

• larger dipole and extended section of VHF directors – used to receive MUX-8

• smaller UHF dipole – used to receive MUX-1 / MUX-2 / MUX-3 / MUX-4

If in a given location MUX-8 is broadcast in vertical polarization:

▶ Turn the larger VHF dipole and its director by 90° – position them vertically.

▶ Do not rotate the entire antenna – just change the position of the VHF elements.

▶ MUX-1 / MUX-2 / MUX-3 / MUX-4 channels will continue to be received in horizontal polarization.

▶ The extensive section of VHF directors supports more stable reception of MUX-8, especially in places away from the transmitter or with more difficult reception conditions.

▶ The pictures below show the horizontal and vertical setting of the VHF elements.

✅ Weather resistant

▶ Aluminum construction — lightweight and corrosion resistant.

▶ Antenna box protects the antenna connection from moisture.

▶ Design adapted to external mounting — for working in rain, sun and changing weather conditions.

▶ The antenna can be mounted on a mast, balcony or facade.

✅ Technical specification – TAMDEL TAZ-26 (with 20 dB amplifier)

Antenna type: directional, external, active

Compatibility: DVB-T / DVB-T2 / HEVC H.265

Supported bands: VHF + UHF

LTE filter: yes

Multiplexes: MUX-1 / MUX-2 / MUX-3 / MUX-4 / MUX-8

Assembly: mast, balcony, facade

Impedance: 75 Ohms

Working channels: 5 – 57

Frequency range: VHF 168 – 230 MHz / UHF 470 – 790 MHz

Antenna gain (passive): VHF 12 to 14 dB / UHF 16 to 18 dB

Signal amplifier: up to 20 dB

Total reinforcement of the set: to approx. 32 to 38 dB depending on bandwidth

Scope of operation of the amplifier: 5 – 862 MHz

Reception range: up to 200 km in favourable conditions

12 V power supply: 100 – 240 V input / 12 V 100 mA output

Separator: yes

Power supply cable length: 1 m

📏 Antenna dimensions and mounting method

▶ Detailed antenna dimensions are shown in the graphic.

▶ Mounting bracket fits masts with a diameter of 2 – 5 cm.

▶ Antenna length after unfolding: approx. 103 cm.

✅ Set includes:

• External directional antenna TAMDEL TAZ-26

• Mounting kit - screws and mast holder

• Antenna amplifier 20 dB

• 12 V antenna power supply with separator

• F plug with gasket for cable connection

• Assembly instructions

• Original manufacturer packaging

Specifications