Atvirkštinio osmoso vandens filtras MIDEA 800GPD su mineralizatoriumi, vandens matuokliu ir 4 x 250 g kavos

Trumpai apie prekę

Prekė: Atvirkštinio osmoso vandens filtras MIDEA 800GPD su mineralizatoriumi, vandens matuokliu ir 4 x 250 g kavos. Kategorija: Atvirkštinio osmoso sistemos.

• Gamintojas: Midea
• Modelis: 800GPD SMART

Is this model for you?

• Speed: approx. 2 liters of water per minute
• App on your phone: yes, via Wi-Fi. Shows water quality and reminds you to replace cartridges
• Tractor: electronic, with water purity display (TDS) and cartridge status
• The best choice when: the water is used by an office or a large family and you want to see the status of the filter right on the tap, without reaching for your phone

⭐ Filtered water for the whole family – with display and application

❌ A family of 4 to 5 people who drink 4 liters of water a day buys about 13 packs of 6×1,5 l per month. On a yearly basis, it’s almost one and a half tons of bottles to bring in and the same amount of plastic to throw away. The filter jug with this consumption means constant pouring and waiting. And the water straight from the tap is a taste of chlorine in tea and stone in the kettle after just a few weeks.

✅ Reverse osmosis filter Midea 800GPD SMART mount under the sink. Water passes through the pre-fill and two reverse osmosis membranes 400GPD, and thanks to the integrated pump it is filtered on an ongoing basis, without tank, with a capacity of up to 120 liters per hour. Electronic tap shows TDS of water and the status of cartridges, and you also control the whole in the WiFi application.

🎯 You unscrew the tap and immediately see what water you are pouring. No seals, no waiting and no guessing when to replace cartridges.

💧 Supreme S-L-MIN-QC Mineralizer

Osmosis also removes calcium and magnesium from the water, and the mineralizer with dolomite gives them back, so the water tastes fuller. You plug it into the hose thanks to the 1/4" QC fast connector. Exchange every 3 to 6 months.

📊 TDS-3 meter with ATC

You can measure tap water before the filter and compare it with the reading after filtration. Water from the network usually has several hundred ppm, after membranes several to several dozen. This difference shows how much work the filter does.

☕ Set of coffee beans Coffee Premium 4×250 g

Four freshly roasted coffee from our roastery: Brazil, Don Crema, Comproma and Espresso. Brew them on tap water and osmosis, and compare the difference alone.

⭐ Highest performance without tank

❌ Classic osmosis has a tank of 8 to 12 litres. With a large family, the tank empties during cooking, and then you wait for it to fill up again. It takes up a large part of the cabinet.

✅ Midea 800GPD SMART has two 400GPD membranes working together and filters water in real time, when the tap is unscrewed. Capacity is up to 120 l/h, which is approx. 2 litres per minute.

🎯 In practice: glass in approx. 8 seconds, kettle 1,5 l in approx. 45 seconds, pot 5 l in approx. 2,5 minutes. After unscrewing the tap, it may take a few seconds before the water flows. This pump starts working and this is normal.

⭐ Electronic tap with TDS display

❌ In ordinary osmosis, you do not know what water you are pouring. The membrane may weaken for months, and you will only learn about it when the water begins to taste worse.

✅ The display in the tap shows the current TDS level, the degree of consumption of cartridges and information about the necessity to replace them.

🎯 You pour every glass with awareness of what is in it. When TDS starts growing or the cartridge ends, you see it right away on the tap, without looking into the cabinet.

⭐ System control in mobile application

❌ You remember about replacing cartridges in ordinary osmosis yourself, and most people simply forget.

✅ WiFi module and dedicated application allow remote monitoring of water quality, consumption of cartridges and necessity of service, from anywhere.

🎯 You replace the cartridges on time, not “someday”, and check the condition of the filter even outside the home.

⭐ Slim SLIM case – 10,5 cm wide

❌ Under the sink you have a siphon, valves, trash can and cleaning products. Osmosis with a tank are two devices instead of one, and many osmosis without a tank takes half a cabinet anyway.

✅ Dimensions 45 × 10,5 × 41,5 cm. The device is only 10,5 cm wide and can be mounted vertically or horizontally.

🎯 You place them at the side of the cabinet or place them horizontally, as it fits into the connection layout. The bin and cleaning supplies stay in place.

⭐ Anti-flood sensor

❌ Leakage under the sink you usually notice after the fact: after the swollen bottom of the cabinet or after the visit of a neighbor from below.

✅ Midea has a built-in anti-flood sensor.

🎯 Less risk of a minor leak turning into a flooded cabinet.

⭐ Simple installation and replacement of cartridges

❌ Installation of osmosis is associated with a plumber, and replacement of cartridges with unscrewing housings and dripping water.

✅ The set includes a set of mounting accessories and readable instruction. You replace the cartridges by pressing, without tools.

🎯 You can install in several dozen minutes, even without previous experience, and it takes a few minutes to replace the cartridges.

⭐ How Midea purifies water: 3 stages

Stage 1: PAC pre-fill (polypropylene + activated carbon)

• ❌ In the water from the net, especially in older buildings, there are sand, rust from pipes, sediment and chlor, which you can feel in tea.
• ✅ Polypropylene retains mechanical particles, and active carbon reduces chlorine and substances that worsen taste and smell.
• 🎯 Water loses the taste of chlorine, and membranes are protected from clogging.

Stage 2: two reverse osmosis membranes 2×400GPD

• ❌ Hard water leaves stone in the kettle, white stains on the glasses and sediment in the machine.
• ✅ RO membranes with filtration accuracy 0,0001 µm significantly reduce excess mineral salt, heavy metals, pesticides and other dissolved impurities.
• 🎯 The teapot and coffee maker stop overgrowing with stone, and the glasses after drying do not have stains.

Stage 3: Supreme mineralizer (included, mounted on tap hose)

• ✅ Supplements membrane water with calcium and magnesium.
• 🎯 Pure water as after osmosis, but with fuller taste.

⭐ Water and energy savings

❌ Each osmosis drains part of the water to the sewer, because in this way it flushes out retained impurities. Older systems can pour a few liters for every liter of clean water.

✅ Midea works in the proportion of 2:1 under optimal conditions, i.e. 1 liter of recoil per 2 liters of clean water. Integrated pump maintains optimal pressure and the device draws max. 80 W and only during filtration.

🎯 Example: with 10 liters of clean water per day, approx. 5 liters instead of even several dozen. At low pressure in the installation, the recoil may be higher.

⭐ Technical specification

• ✔ Model: CWRC800-A108
• ✔ Type: tankless reverse osmosis system for under-sink installation
• ✔ Purpose: home, office
• ✔ Performance: 800GPD, up to 120 l/h
• ✔ Membranes: 2 × 400GPD
• ✔ Filtering accuracy: 0,0001 µm
• ✔ The ratio of filtrate to recoil: approx. 2:1
• ✔ Input pressure: 1 – 6,9 bar
• ✔ Voltage: 100 – 240 V
• ✔ Power consumption: max. 80 W (during filtration)
• ✔ Connectivity: WiFi, dedicated application
• ✔ Tractor: electronic with TDS display and cartridge status, chrome
• ✔ Anti-flood sensor: yes
• ✔ Horizontal operation: yes
• ✔ Device dimensions: 45 × 10,5 × 41,5 cm
• ✔ Weight: 12,1 kg
• ✔ Connections: 1/4" QC (quick connectors)
• ✔ Insert installation system: by pressing, without tools
• ✔ Recommended replacement of PAC contribution: what approx. 6 to 12 months (approx. 3600 l)
• ✔ Recommended replacement of RO membranes: what approx. 12 to 24 months (approx. 7200 l)
• ✔ Warranty: 24 months
• ✔ EAN code: 6939815663855
• ✔ Contents of the set: filter Midea 800GPD SMART, electronic tap with display, mounting kit, installation instructions
• ✔ Free: Supreme S-L-MIN-QC mineralizer with QC quick couplers, TDS-3 meter with ATC, set of coffee beans Coffee Premium 4×250 g

❓ Does the filter have a water tank?

✅ No. Midea 800GPD SMART is a tankless system that filters water in real time, after unscrewing the tap.

❓ What is the performance?

✅ Up to 120 litres per hour, i.e. approx. 2 litres per minute. You can fill a 1,5 l kettle in approx. 45 seconds.

❓ How is it different from Midea 800GPD without WiFi?

✅ The SMART model has two 400GPD membranes, electronic tap with TDS display, WiFi application and slim housing 10,5 cm with the possibility of horizontal mounting.

❓ What information does the tap display?

✅ Current TDS level, degree of consumption of cartridges and information about the necessity of their replacement.

❓ What does the app show?

✅ Water quality, consumption of cartridges and necessity of service. You can check it remotely, from anywhere.

❓ Will the tap show another TDS after installing the mineralizer?

✅ If the mineralizer is in front of the tap, the TDS reading will be higher, because the mineralizer intentionally adds minerals to the water. This is normal and does not mean a fault. To check the membrane itself, measure the water with a meter from the kit before the mineralizer.

❓ Why a TDS meter when the tap shows TDS?

✅ You can measure tap water before filter and water before mineralizer, so you will see the full picture of the system operation and independently check the reading from the display.

❓ Can the filter be mounted horizontally?

✅ Yes. The SLIM housing allows for vertical or horizontal installation.

❓ Where is the mineralizer installed?

✅ On the hose between the device and the tap. You cut the hose and plug the mineralizer into the QC quick couplings, without tools or Teflon.

❓ Is assembly difficult?

✅ No. The assembly kit and clear instructions allow you to install the system in several dozen minutes, even without prior experience.

❓ What is needed for assembly?

✅ Access to cold water under the sink, connection to the drain (syphon), electric socket in the cabinet, hole in the countertop or sink on the tap and WiFi range under the sink if you want to use the application. If you don't have an outlet under your sink, plan this before purchasing.

❓ Does the device require a power connection?

✅ Yes. The system has an integrated pump and an electronic tap, so it needs an electric socket. Power consumption is max. 80 W, and only during filtration.

❓ How much water is discharged into the sewer?

✅ Under optimal conditions 1 liter for every 2 liters of purified water. At low pressure in the installation, the recoil may be higher.

❓ What contaminants does the system reduce?

✅ PAC cartridge stops sand, rust and deposits and reduces chlor and unpleasant taste and smell. RO membranes further reduce excess mineral salts, heavy metals and pesticides.

❓ Can you drink water immediately after installation?

✅ Before the first use, rinse the cartridges and the entire system according to the manufacturer’s instructions. After rinsing, the water is ready to eat.

❓ What are the operating costs?

✅ PAC contribution you list what approx. 6 to 12 months (approx. 3600 l), RO membranes every approx. 12 to 24 months (approx. 7200 l) and mineralizer every 3 to 6 months. The tap and app will remind you to replace your osmosis cartridges.

❓ Does the TDS detect bacteria?

✅ No. TDS shows only the total level of dissolved substances in water. It does not detect bacteria or identify specific compounds.

❓ Why does water not flow immediately after unscrewing the tap?

✅ The pump needs a few seconds to start working. This is normal in systems without a tank.

Specifications