Aukštos įtampos akumuliatorinis smūginis suktuvas 21V su lagaminu ir antgaliais

Trumpai apie prekę

Prekė: Aukštos įtampos akumuliatorinis smūginis suktuvas 21V su lagaminu ir antgaliais. Kategorija: Akumuliatoriniai suktuvai.

• Gamintojas: Blow
• Modelis: 53-350#

Universal tool for twisting furniture, screwing and unscrewing screws and light drilling in wood and plastics. The adjustable torque, speed, and direction make it easy to customize the device to your task, while the battery power supply ensures that you have no tangled cord. The set includes two batteries, a charger, bits, drills, caps, a flexible extension and a practical suitcase.

✅ Maximum torque of 50 Nm

✅ 21 V battery power supply

✅ Two batteries included

✅ Smooth speed control

✅ Torque adjustment

✅ Right and left rotation

✅Powerful led

✅ Quick-clamp handle 1 to 10 mm

✅ Complete set of accessories

No more manual tightening of multiple screws

Twisting furniture or assembling more pieces with a regular screwdriver can be time-consuming and tiring. The screwdriver speeds up work and reduces the effort needed to tighten and unscrew screws.

No need to work at the outlet

Battery power allows you to perform tasks in the garage, gazebo, basement, on the plot or in another place where the use of a wired tool would be inconvenient.

Less risk of tightening too hard

Torque adjustment helps to adjust the force of action to the material. Proper setting reduces the risk of damage to the soft surface, breaking the thread or too deep embedding of the screw.

Easier to remove old screws

Changing the direction of rotation allows you to quickly go from screwing to unscrewing. The function is useful when dismantling furniture, replacing fittings, repairing and dismantling structures.

More comfortable work in hard-to-reach places

The included flexible extension can make it easier to reach screws in places where setting up the entire screwdriver is difficult.

Less downtime during work

Two batteries allow you to better organize work and charging, which is especially useful when performing more tasks.

The drill-driver can be used, among others, for:

• twisting and unscrewing furniture,
• installation of hinges, handles and fittings,
• screwing slats and wooden elements,
• repair work in the house and garage,
• folding racks, cabinets and structures,
• screwing and unscrewing screws,
• light drilling in wood,
• drilling in plastics,
• hobby and DIY work,
• performing small workshop work.

Always use a working tip suitable for the type of screw, screw, hole and material being processed.

Trigger speed adjustment

The drill-driver does not start immediately at maximum speed. The speed can be increased gradually by pressing the trigger harder.

This solution allows you to:

• accurately set the bit in the screw socket,
• start drilling without suddenly moving the drill,
• better control of screwing,
• adjust the pace of work to the material being processed.

When the trigger is released, the handle stops.

Selection of torque

The adjustment ring allows you to set the tightening force:

• lower value – for small screws and soft materials,
• higher value – for larger screws and harder materials,
• The highest position marked with the symbol of the drill – for drilling.

Correct torque setting allows you to work more accurately and reduces the risk of damage to the material or fastening element.

Drill-driver allows you to choose the right mode of operation: screwing, drilling or drilling with impact. The screwing mode will work well when assembling furniture and tightening screws, drilling will facilitate making holes in wood, metal and plastics, while the impact function will allow you to work more effectively in harder materials, such as brick or light concrete. Thanks to this, one device can replace several different tools and will work well during many renovation, assembly and workshop works.

The drill-driver is equipped with a quick-clamp handle designed for tips with a diameter of 1 to 10 mm.

To mount a bit or drill:

1. Remove the battery from the device.
2. Turn the front of the handle to extend the jaws.
3. Place the tip centrally in the holder.
4. Tighten the handle until securely attached.
5. Pull the tip slightly and see if it has been properly seated.

Secure attachment of the tip is important for safety and accuracy.

The set includes two 21 V Li-ion batteries.

Lithium-ion batteries allow you to use the tool without a power cord. Replacement of the battery is carried out by means of side release buttons.

To mount the battery, slide it into the guides until it is clearly latched. Before starting work, it is worth checking whether the battery has been properly blocked.

Before the first use, the battery should be fully charged.

The state of charge is indicated by LEDs:

• 3 green LEDs – full charge,
• 2 green LEDs – about 2/3 of the capacity,
• 1 green LED – about 1/3 of the capacity,
• red LED – warning and need for charging.

Only use the charger that came with the device for charging. The recommended ambient temperature during charging is from 0°C to +40°C. Once charging is complete, the charger must be disconnected from the network.

• Device Type: Cordless Drill/Driver
• Voltage: 21 V
• Battery Type: Li-ion
• Battery Voltage: 21 V
• Number of Batteries Included: 2
• Handle Range: 1 to 10 mm
• Handle Type: Quick-clamp
• Maximum torque: 50 Nm
• Maximum rotational speed: up to 1500 rpm /min
• Stroke frequency given in the manual: 25 000
• Approximate charging time: about 2 to 3 hours
• Charger Voltage: 230 V
• Rotation Direction: Right/Left
• Accidental start lock: yes, middle switch position
• Speed control: yes, with trigger
• Torque adjustment: yes
• Suitcase: Included

The set includes:

• BLOW cordless drill/driver,
• 2 batteries 21 V,
• charger 230 V,
• set of screwdriver bits,
• set of drills,
• caps / working sleeves,
• flexible extension with magnetic tip,
• Transport case.

Specifications