Automātisks automašīnas akumulatora lādētājs, 6V/12V, 15A, ar akumulatora atjaunošanas funkciju

Trumpai apie prekę

Prekė: Automatinis automobilio akumuliatoriaus įkroviklis, 6V/12V, 15A, su akumuliatoriaus atstatymo funkcija. Kategorija: Baterijų įkrovikliai.

• Gamintojas: FUMO
• Modelis: PROSTOWNIK AUTOMATYCZNY A80 12V 24V 15A LCD

Take care of the total reliability of your vehicles and forget about problems with a discharged battery in the morning! Meet SMART A80 – an intelligent, fully automatic microprocessor rectifier with a maximum charging current of up to 15A, with support for a wide voltage range from 6V to 24V, PWM technology and 8-stage desulphurisation and regeneration cycle of cells.

Are you tired of worrying that your car, motorcycle, delivery truck or agricultural machine won’t ignite after a long stop or in the winter frost?

▶ SMART A80 is a universal, professional service energy bank that replaces several traditional chargers.

▶ Equipped with an advanced microprocessor MCU and pulse PWM technology, the device automatically recognizes the voltage of the connected battery (6V, 8V, 12V, 14V, 16V or 24V), diagnoses its technical condition and selects the optimal current course.

▶ Regardless of whether you are charging a classic WET acid battery, gel GEL, AGM or EFB – SMART A80 ensures maximum battery life and full safety of your vehicle’s electronics.

⭐ The most important advantages of the Volt Poland SMART A80 rectifier in a nutshell:

✅ Maximum charging current up to 15A: Instant and efficient power replenishment in batteries with capacities from 3 Ah to 150 Ah.

✅ Wide voltage support 6V / 8V / 12V / 14V / 16V / 24V: Universal charger for motorcycles, passenger cars, vans, trucks and agricultural machinery.

✅ Intelligent 8-step charging process: From diagnostics, through impulse desulfurization, basic charging, to automatic maintenance of 100% charge.

✅ Advanced PWM pulse technology: Precise regulation of current parameters and high energy efficiency of the device up to 98%.

✅ Effective desulphurisation and REPAIR function: Regeneration and restoration of efficiency of usable and partially sulphurized batteries.

✅ Easy-to-read digital LCD display: Current preview of voltage (V), charging current (A), operating mode and approximate charge level.

✅ Active cooling with MCU fan: Intelligent heat dissipation guarantees stable operation even during long-term 15A charging.

✅ Complete protection package: 100% protection against short circuit, reverse polarity of the blade, overheating and overcharging of cells.

➡ Universal application – from motorcycles to trucks and machines

One Volt Poland SMART A80 rectifier is enough to handle all vehicles in your household, company or workshop:

🚗 Passenger cars and vans (12V / 24V): Ideal for charging starter batteries in diesel and gasoline engines.

🏍 Motorcycles, scooters and quads (6V / 12V): Safe soft start current adapted to smaller capacities.

🚜 Agricultural machinery, boats and motorhomes: Indispensable for winter maintenance of deep discharge batteries.

🔋 Full cell compatibility: Supports WET (acid), VRLA, GEL (gel), EFB and AGM batteries (used in vehicles with Start-Stop system).

No more guessing whether the charging is over and in what condition your battery is. The SMART A80 rectifier is equipped with a backlit LCD screen for full transparency.

✅ Current voltage and current preview: The real-time display indicates the exact battery voltage (V) and charging current (A).

✅ Charge Level Indicator: A clear graphic bar allows you to assess the progress of the charging cycle with one glance.

✅ Operating mode indication: The screen informs about the active stage (e.g. desulphurisation, maintenance) and possible connection errors.

➡ 8 stages of intelligent charging – complete battery regeneration

The SMART A80 rectifier guides the battery through an advanced 8-stage cycle that rebuilds its efficiency and prevents irreversible aging of cells:

1. Diagnostics: Automatic verification of the state of charge and correctness of the connection with the klem.
2. Desulfurization: Pulse loading breaking sulphate crystals deposited on lead plates.
3. Analysis: Checking whether the battery safely accepts charging current.
4. Soft start: Gentle start of the process to protect heavily discharged cells.
5. Primary charging: Maximum current charging (up to 15A) to reach approx. 80% capacity.
6. Final charging: Tightening capacity at decreasing intensity up to 100%.
7. Charging analysis: Test to verify that the battery is stable.
8. Pulse support: Automatic standby mode (95-100%), keeping the battery fully operational without the risk of overcharging.

➡ PWM technology and MCU control – maximum battery life

Traditional transformer rectifiers provide a constant, inefficient voltage, which can lead to electrolyte gassing and damage to delicate cells. The SMART A80 sets new standards in safe charging.

✅ PWM Pulse Width Modulation: The microprocessor regulates charging parameters by sending precise voltage and current pulses. This prevents overcharging and excessive heating of the battery.

✅ Automatic Voltage Identification: PThe rectifier automatically recognizes whether a 6V, 12V or 24V battery has been connected (with precise detection thresholds), eliminating the risk of misconfiguration by the user.

✅ High efficiency up to 98%: Modern integrated circuits guarantee minimal energy losses and fast achievement of full charge.

SMART A80 has been equipped with solutions that increase the safety of use.

🔌 Reverse polarity protection

In the case of replacing terminals + and - the rectifier signals incorrect connection. After proper connection, you can continue charging.

⚠ Short-circuit protection

Detection of the short circuit causes the device to stop working and start signaling.

🌡 Overheating protection

The rectifier controls its temperature. In the event of an excessive temperature rise, the charging process is stopped until the device is cooled down.

🔋 Battery diagnostics

The microprocessor monitors battery parameters and charging process on an ongoing basis.

⚡ Voltage protection

The system controls the compliance of the set parameters with the voltage of the detected battery.

Once the primary charging is complete, the rectifier can go into backup mode.

The device monitors the voltage of the battery and, if it drops, automatically starts charging. This allows you to keep the battery in a high state of charge without having to constantly control the rectifier.

The built-in fan controlled by the MCU system helps dissipate heat when working with a higher charging current.

The solution supports stable operation of the device also during longer charging cycles.

Operation of the rectifier is intuitive:

1 connect the red wire to the positive pole (+) of the battery,

2 connect the black wire to the negative pole (-),

3 set the appropriate battery voltage and charging mode.

4 connect the rectifier to the 230V network,

5 control the charging process on the LCD display.

• Supply Voltage: 230V / 50 Hz
• Supported Voltages: 6V / 8V / 12V / 14V / 16V / 24V (Automatic Detection)
• Maximum charging current: 15A
• Charging current range: 0 – 15A
• 12V/24V battery capacity: 3–150 Ah
• 6V battery identification: 2–7,4V
• Identification of 12V battery: 8–14,5V
• 24V battery identification: 18 – 29V
• Battery types: VRLA, WET, GEL, EFB, AGM
• Charging technology: PWM (Pulse Width Modulation) + MCU control
• Charging process: 8-step, automatic with desulphurisation function
• Efficiency: up to 98%
• Operating temperature: from -30°C to +50°C
• Cooling: active, fan controlled MCU
• Net weight: approx. 0,95 kg
• Power cord length: approx. 136 cm
• Wire length + / -: approx. 120 cm

➡ How to properly use the rectifier and take care of the battery?

Follow the following rules to maximize battery life and avoid operational errors:

⭐ Connection order: First connect the red clamp to the positive pole (+), then the black clamp to the negative pole (-). Only after making sure of the correct polarity, turn on the rectifier to the 230V outlet.

⭐ Formation and desulphurisation of old cells: With heavily discharged batteries, allow the rectifier to carry out a full cycle of 8 stages (including the desulphurisation stage). This process may take several hours, but it allows the regeneration of sulphurized lead plates.

⭐ Prophylactic recharging before winter: A temperature drop below 0°C reduces battery efficiency by up to 30%. Prophylactic charging with SMART A80 rectifier up to 100% before the winter season prevents electrolyte freezing.

⭐ Device storage: Once charging is complete, disconnect the rectifier from the 230V network and then remove the clamps from the battery. Store the rectifier in a dry place.

➡ FAQ – Answers to the most important questions before buying

1. Is the Volt Poland SMART A80 rectifier suitable for AGM and GEL batteries?

Yes, the device fully supports gel batteries (GEL), AGM, EFB and classic lead-acid WET with voltages from 6V to 24V.

2. Can I charge a 24V battery in a truck or tractor with this rectifier?

Yes. SMART A80 automatically detects 24V installations (in the voltage range of 18-29V) and charges them with a properly matched current.

3. What happens if I confuse the (+ and -)?

The device has protection against reverse polarity. In case of incorrect connection, the rectifier will not start the current flow and will display an error message on the LCD screen.

Specifications