Automobiliniai užvedimo laidai SOLID CABLES, 1500A, 6 m, 50 mm²

Trumpai apie prekę

Prekė: Automobiliniai užvedimo laidai SOLID CABLES, 1500A, 6 m, 50 mm². Kategorija: Užvedimo laidai.

• Gamintojas: no brand
• Ilgis: 6 m

Long wires, solid connections and firmly holding clamps — a set for emergency start of cars and larger vehicles.

When the battery does not provide enough power to start the motor, you need wires that can be conveniently connected to the appropriate power source. In this set you get two sections of 6 meters each, a CCA conductor with a declared cross-section of 50 mm² and metal clamps with copper coating.

It is a practical equipment for a car, workshop, farm or fleet. The kit is suitable for assisting in the start-up of gasoline and diesel engines, including tractors, agricultural machinery, and trucks, when tailored to the requirements of the vehicle.

⭐ The most important features of the set

• Two wires of 6 m each – greater freedom of setting vehicles and cable routing.
• Vein cross-section 50 mm² — construction of 710 wires with a diameter of 0,3 mm
• Metal clamps fully copper plated — with shielded handles and serrated jaws.
• Strong springs — help keep terminals on connection points.
• Closed wire ends — mechanical connection to the metal clamp body.
• Etui included — convenient storage of the whole set.

⭐Each wire is 6 meters

It is not always possible to place two vehicles close to each other and exactly opposite each other. Access to the battery or starting points may be hindered by the way the vehicle is parked, the surroundings of the vehicle or the position of the battery.

The length of 6 meters of each cable gives you more freedom when preparing the connection. It facilitates cable routing in the parking lot, driveway, utility square or with a larger vehicle.

The set includes:

• red cable with a length of 6 m,
• black cable with a length of 6 m.

Thanks to this, you can more conveniently adjust the course of the wires to the location of the starting points and the available space.

⭐ 50 mm² — specific conductor construction

The conductor of each conductor consists of 710 wires with a diameter of 0,3 mm. This construction corresponds to the declared cross-section 50 mm².

The value of 50 mm² refers to the conductive conductor. The conductor material is CCA, i.e. aluminum coated with a layer of copper.

The multi-wire design allows you to arrange the wires when connecting and roll them up for storage. Detailed data on the structure of the vein can also be found in the specification below.

⭐ Fully copper-plated metal clamps

The metal terminal bodies were coated with copper coating. The handles have red or black covers, and the profiled jaws make it easy to embed the clamp on the appropriate connection point.

Strong spring presses the jaws and helps maintain the connection during start-up. Rifling the handles makes it easy to operate the clamp when putting on and taking off.

The set includes four clamps:

• two red on the red wire,
• two black on black wire.

Clear color differentiation makes it easy to identify wires when preparing the kit.

⭐ Lockable tips and solid fastening

The wire conductor is embedded in a cuffed tip, which is attached to the metal clamp body. The connection design also includes support for insulation at the cable entrance.

This attachment helps to keep the cord in the correct position when unrolling, connecting and assembling the kit. The crimped tips and jaw pressure support a stable connection during operation.

This is an important element of the construction of wires used repeatedly at the car, in the workshop or farm.

⭐ Proven in practice — truck start-up

Using the offered model of wires, we successfully started the engine of the truck.

This is our experience with the actual use of wires. The kit can be used for starting gasoline and diesel cars, as well as tractors, agricultural machinery and trucks, taking into account the requirements of the vehicle.

Start-up efficiency also depends on battery status, power source efficiency, vehicle condition and correct connection.

⭐ For car, workshop and farm

The kit will be useful for people who want to have jumper cables at hand in various situations:

• Drivers of passenger cars and vans — as emergency start equipment.
• Farm owners — for use with tractors and machinery selected for cable parameters.
• Truck users – when the length of the cables and convenient access to connection points are important.
• Workshops and fleet operators — as a handy kit to assist with starting vehicles.

Two long wires, clear colors and a set of four clamps make it easy to prepare the set for use.

⭐ Case included — order after work

After use, you will roll up the wires and hide the entire set in the included zippered case. It holds both wires along with four clamps, making it easy to store the kit in your trunk or workshop.

Transparent flap allows you to check the contents without opening, and the wires remain collected in one place.

⭐ Technical specification

• Type: wires for emergency start.
• Maximum current: 1500 A — the value declared by the supplier.
• Length: 2 × 6 m.
• Single cable length: 6 m.
• Declared conductor cross-section: 50 mm².
• Vein material: CCA — copper-plated aluminium.
• Construction of the conductor: 710 wires with a diameter of 0,3 mm.
• Number of clamps: 4 pieces.
• Finish of metal terminal bodies: copper coating.
• Clip holders: shielded, grooved.
• Connection of the cable with the clamp: crimped tip attached to the body.
• Colors of wires and terminal covers: red and black.
• Etui: included.

⭐ Contents of the set

• 1 red wire with a length of 6 m, terminated with two red clamps.
• 1 black cable with a length of 6 m, terminated with two black clamps.
• Storage case.

Before use, read the instructions of the vehicle and wires, check their condition and choose the right power source for the vehicle being started.

Specifications