Piegādes termiņš visā Lietuvā: 5-7 darba dienas.
Piegādes cena uz norādīto adresi: 3 eiro
Apraksts
Trumpai apie prekę
Prekė: Automobilinis stiprintuvas Crunch GPX500.2 250 W RMS su RX10KIT laidais ir XTREME lipdukais. Kategorija: Stiprintuvai.
- Gamintojas: no brand
- Modelis: GPX500.2
The GPX500.2 is a two-channel amplifier operating in class A / B It has a number of extensive functions achievable in much more expensive models, which makes its use universal.
With built-in active crossovers and configuration options, it is suitable for powering both a pair of speakers and a subwoofer.
Possibility of using built-in high-pass crossovers. High-pass crossovers cut off the lowest frequencies, which speakers, especially those with a smaller diameter, do not carry, and which largely burden them and are the cause of sound distortion. Thanks to the crossovers, the sound is clear and pleasant to the ear. The ability to raise high frequencies makes them better audible, especially if the speakers are mounted at the back or low in the door.
- Number of channels: 2
- RMS power at 4Ω: 2 x 70 Watt
- RMS power at 2Ω: 2 x 125 Watt
- Dynamic power at 4Ω: 2 x 140 Watt
- Dynamic power at 2Ω: 2 x 250 Watt
- Bridgeability: yes
- RMS power in bridge at 4Ω: 1 x 250 Watt
- Maximum power in bridge at 4Ω: 1 x 500 Watt
- Transmission bandwidth: 5Hz – 40kHz (-3dB)
- Crossover settings: Full – HPF - LPF
- High-pass crossover 1-2 ch: 50 – 250Hz 12dB/octave
- Low pass crossover 1-2 ch: 50 – 250Hz 12dB/octave
- Working in stereo mode: yes
- Backing of low and high tones - separate: 0/6/12 dB
- Signal-to-noise ratio: > 90 dB
- Sum of harmonic distortion T.H.D & N.: < 0,5% (1 kHz )
- Input sensitivity: 0.1-7 V
- Input Impedance: 10 kOhm
- RCA signal line input: yes
- Hi-level signal input: no
- Signal output: 1 pair RCA
- Diagnostic indicators: power supply / protection / overheating
- Class Circuit: Analog A/B
- Current protection: 1 x 30 A
- Dimensions (H x W x L): 254 x 46 x 220/250 mm
A set of wires to mount the amplifier in the car. The set includes 10mm2 power cables, double shielded RCA signal cables, control cable, fuse holder and accessories. The kit allows for quick and professional installation of the amplifier.
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With a VAT invoice |
| Parametry | Brand | no brand |
| Parametry | Model | GPX500.2 |
| Parametry | Manufacturer code | GPX500.2 |
| Parametry | Packaging status | original |