Automašīnas pastiprinātājs Crunch GPX600.2, 2 kanāli, 2x80W vai 1x300W, piemērots zemo frekvenču skaļrunim

Trumpai apie prekę

Prekė: Automobilinis stiprintuvas Crunch GPX600.2, 2 kanalai, 2x80W arba 1x300W, tinka žemų dažnių garsiakalbiui. Kategorija: Stiprintuvai.

• Gamintojas: no brand
• Modelis: GPPX600.2

• Musical power 600W
• Rms power in bridge 300W
• Large current reserve
• 2 channel
• Ideal for powering a subwoofer or a good set of speakers
• Extensive crossover
• Decent metal housing, brushed aluminum top
• High-quality RCA connectors

• Number of channels: 2
• RMS power at 4Ω: 2 x 80 Watt
• RMS power at 2Ω: 2 x 150 Watt
• Dynamic power at 4Ω: 2 x 160 Watt
• Dynamic power at 2Ω: 2 x 300 Watt
• Bridgeability: yes
• RMS power in bridge at 4Ω: 1 x 300 Watt
• Maximum power in bridge at 4Ω: 1 x 600 Watt
• Transmission bandwidth: 5Hz – 40kHz (-3dB)
• Crossover settings: Full – HPF - LPF
• High-pass crossover 1-2 ch: 50 – 250Hz 12dB/octave
• Low-pass crossover 1-2 ch: 50 – 250Hz 12dB/octave
• Working in stereo mode: yes
• Backing of low and high tones - separate: 0/6/12 dB
• Signal-to-noise ratio: > 90 dB
• Sum of harmonic distortion T.H.D & N.: < 0,5% (1 kHz )
• Phase control: no
• Input sensitivity: 0.1-7 V
• Input Impedance: 10 kOhm
• RCA signal line input: yes
• Hi-level signal input: no
• Signal input: 1 pair RCA
• Signal output: 1 pair RCA
• Diagnostic indicators: power supply / protection / overheating
• Class Circuit: Analog A/B
• Current protection: 1 x 30 A
• Dimensions (H x W x L): 254 x 46 x 220/250 mm

The GPX600.2 is a two-channel amplifier operating in class A / B It has a number of extensive functions achievable in much more expensive models, which makes its use universal.

With built-in active crossovers and configuration options, it is suitable for powering both a pair of speakers and a subwoofer.

Possibility of using built-in high-pass crossovers. High-pass crossovers cut off the lowest frequencies, which speakers, especially those with a smaller diameter, do not carry, and which largely burden them and are the cause of sound distortion. Thanks to the crossovers, the sound is clear and pleasant to the ear. The ability to raise high frequencies makes them better audible, especially if the speakers are mounted at the back or low in the door.

The amplifier has the ability to bridge, i.e. combine the power of the left and right channels to power one woofer. The built-in low-pass crossover allows you to correctly set the frequency response so that the subwoofer receives sound with the appropriate frequency response.

In this setting, the low-pass crossover cuts off high frequencies that the subwoofer does not carry, so that it does not heat up unnecessarily, and uses all the power to process the bass band. In addition, it is possible to raise low frequencies.

Ease of configuration and settings, at a very attractive price, makes it an excellent proposition for debutants starting their adventure with music in the car.

Specifications