Automobilinis stiprintuvas GAS, 2 kanalai, 2x70W RMS, 2 omų

Trumpai apie prekę

Prekė: Automobilinis stiprintuvas GAS, 2 kanalai, 2x70W RMS, 2 omų. Kategorija: Stiprintuvai.

• Gamintojas: GAS
• Modelis: A1-70.2

GAS MAD A1-70.2 is a **compact, 2-channel car amplifier** designed to **power a front speaker set, coaxial speakers, or be bridged for a single subwoofer**. The MAD series is a true statement: built to **play loud, fit perfectly into your vehicle's interior, and deliver sound that can shake the neighborhood**. With 2 x 70 W RMS at 4 Ω, you get **great speaker control, flexible configuration options, and an excellent power-to-price ratio**.

⚙ Technical specification

• Number of channels: 2
• Input mode: Mono / 2Ch
• RMS power at 2 Ω: 2 x 105 W
• RMS power at 4 Ω: 2 x 70 W
• RMS power in bridge at 4 Ω: 1 x 220 W
• Transmission bandwidth: 15-22 000 Hz
• Low pass filter LPF: 50-4000 Hz
• High-pass filter HPF: 50-4000 Hz
• Signal-to-noise ratio: >98 dB
• Bass EQ: 0-12 dB @ 45 Hz
• Crossover slope: 12 dB
• Power supply voltage: 10-16 V
• Input sensitivity: 0,5-6 V
• Input Impedance: 10 kOhm
• THD: < 0,5%
• Fuse: 1 x 35 A
• Suppression factor: >130
• High level input: Yes
• RCA Line Out: Yes

GAS MAD A1-70.2 at a glance, the most important features:

✨ Impedance flexibility – stable operation in stereo at 4 Ω and 2 Ω and a powerful bridged mode of 1 x 220 W RMS at 4 Ω.

✨ Wideband HPF and LPF filters (50 – 4000 Hz) – an extremely wide range of crossover adjustment allows for perfect bandwidth cutting for any speakers.

✨ High Level Input with ATO – allows direct connection to the factory radio without RCA outputs, and the ATO function automatically turns on the amplifier when a signal is detected.

✨ CLIP indicator – built-in LED informs about signal overdrive, facilitating safe and precise setting of the Gain level.

✨ High damping factor (>130) – provides exemplary control over the movement of the diaphragm, which translates into fast and compact bass.

✨ Bass EQ 0 – 12 dB @ 45 Hz – a function of smooth bass boost at a key characteristic point for car audio.

✨ Comprehensive protection – advanced systems protecting the device against short circuit, overload and overheating.

Included in the set:

• 1 x GAS amplifier MAD A1-70.2
• 1 x User Manual
• 1 x HI Input cable
• 4 x Mounting screw
• 1 x Fuse

Benefits for you:

⮕ Power, dynamics and versatility in configuration

With 2 x 70W RMS at 4 Ω, you will breathe a whole new life into your door speakers. The amplifier provides withsignificantly better diaphragm control and a clearer impulse response than the car radio itself. After 2 Ω load, the amplifier gives off a stable 2 x 105 W RMS, and the bridge mode (220 W RMS) makes it an excellent and very cost-effective drive for a smaller or medium subwoofer.

⮕ Precise tuning and full bandwidth control

HPF and LPF filters with a slope of 12 dB operate in an impressive range of up to 4000 Hz. This allows not only to relieve midbass from the lowest, destructive frequencies, but also to perfectly tune the subwoofer cut-off in mono mode. The Bass EQ system allows you to squeeze additional energy from the lower registers, and the high damping factor prevents unwanted sound spillage.

⮕ Seamless integration with factory systems (OEM)

Do you have a serial radio without signal outputs? High Level input allows direct signal retrieval from speaker cables. Automatic start-up system (ATO) makes the amplifier turn on and off itself together with the radio, eliminating the need for cumbersome searching and running a separate excitation cable

⮕ Safety of your equipment thanks to the CLIP control

Setting the sensitivity of the amplifier to hearing is a thing of the past and a risk of damage to the speakers. The built-in CLIP indicator immediately visually signals the appearance of an overdriven signal. Thanks to this, you can perfectly tune the system by squeezing the maximum pure power from the amplifier without worrying about overheating and burning coils in the speakers.

Specifications