Piegādes termiņš visā Lietuvā: 5-7 darba dienas.
Piegādes cena uz norādīto adresi: 3 eiro
Apraksts
Trumpai apie prekę
Prekė: Automobilinis stiprintuvas KICX RX 2.200 ver.2, 2 kanalai, 2x200/300W, 1x600W RMS. Kategorija: Stiprintuvai.
- Gamintojas: Kicx
- Modelis: RX2.200ver.2
✳ ✳ ✳ KICX RX 2.200 ver.2 - 2-channel amplifier
✴ ✴ ✴ This is the LATEST VERSION of the RX series amplifiers very well received by customers.
⭐ ⭐ ⭐ KICX RX 2.200 ver.2 is a 2-channel amplifier operating in analog class A/B. It is characterized by high powers enclosed in a compact aluminum housing. The amplifier reaches 2x200W RMS at 4ohm and 2x300W RMS at 2ohm. In the bridge gives 600W RMS at 4ohm.
➡ The current version is primarily increased RMS power at 2 Ohms and HIGH-VOLTAGE SIGNAL INPUT (Hi-Input) as well as smaller COMPACT DIMENSIONS.
➡ BASS CONTROL REMOTE CONTROL INCLUDED
➡ RX series amplifiers are characterized by very good technical parameters in SENSATIONAL VALUE FOR MONEY.
⚙ BASIC TECHNICAL DATA ⚙
- Amplifier class: A/B (analog)
- Built-in high-voltage signal input (Hi-Input)
- Output power (RMS):
- 4 Ohm - 2x200 W
- 2 Ohm - 2x300 W
- Connection in BRIDGE at 4 Ohm - 600 W
- High-pass filter HPF: 50-8000 Hz/12dB per octave
- Low pass filter LPF: 50-8000 Hz/12dB per octave
- Transmission bandwidth: 20-20000 Hz
- Input Impedance / Input Impedance High Level: 560 kOhm
- Input Impedance / Input Impedance Low Level: 22 kOhm
- Damping Factor: 100
- Minimum speaker impedance: 2 Ohms
- Harmonic distortion: 0,1%
- Signal-to-noise ratio: 90dB
- Power consumption without load: 1A
- Delay of switching on: 3 sec.
- Power supply voltage: 12-14,4V
- Input sensitivity: 0,2-6V
- Fuses: 3x25A
- RCA inputs: 2
- RCA outputs: 2
- Protection: thermal / short circuit / overload - Signaling diode
- Dimensions: 340x212x53 mm COMPACT SIZE
- Speaker connectors: 16 GA/ 1,51 mm2
- Power connectors: 4GA/22,5mm2
- BASS CONTROL REMOTE CONTROL INCLUDED
✅ SET INCLUDES:
- Amplifier
- Screws for mounting
- Comes with a bass control remote
- Plugs with wires for Hi-Input sockets
- Warranty card
- Instruction
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With a VAT invoice |
| Parametry | Brand | Kicx |
| Parametry | Model | RX2.200ver.2 |
| Parametry | Number of channels | 2-channel |
| Parametry | Amplifier class | A/B |
| Parametry | Manufacturer code | RX2.200ver.2 |
| Parametry | Rated RMS power | 600 W |
| Parametry | Impedance | 2 Ω |
| Parametry | THD distortion | 0.1% |
| Parametry | Signal-to-noise ratio | 90 dB |