Auto pastiprinātājs REBEC A-Series A6150, 6 kanāli, Class AB

Trumpai apie prekę

Prekė: Automobilinis stiprintuvas REBEC A-Series A6150, 6 kanalų, Class AB. Kategorija: Stiprintuvai.

• Gamintojas: REBEC
• Modelis: WZM-REBEC-A615000000

The most important features

⭐ 6 channels class AB - six independent channels allow you to power the front, rear and bass section in one orderly installation.

⭐ 4x100 W RMS at 4 Ω - 1-4 channels give a solid power reserve for speaker sets, improving control and dynamics.

⭐ 2x150 W RMS at 4 Ω - stronger 5-6 channels work well where the system requires more current support.

⭐ Bridge 1x450 W RMS at 4 Ω - bridge channels 5 and 6 make it easy to turn on the subwoofer without adding a separate amplifier.

⭐ 20 Hz-35 kHz band and THD below 0,08% - wide bandwidth and low distortion help maintain sound clarity at higher volume.

⮕ Six channels, more possibilities

Rebec A-Series A6150 is an amplifier for people who want to build a coherent system without dividing the installation into several random devices. The 6 channel system allows you to distribute power between the front, rear and bass sections, making it easier to keep your setup organized. This is a practical solution where both power and control over the entire audio track count.

⮕ Class AB and real power

This model works in the class AB, which is why it focuses on natural sound and good control in a wide range of volume. Channels 1-4 offer 4x100 W RMS at 4 Ω, and channels 5-6 2x150 W RMS at 4 Ω, so the amplifier can power not only the front and back, but also a stronger bass section. When the system needs a larger impact, channels 5 and 6 can be bridged to 1x450 W RMS at 4 Ω.

⮕ Convenient system tuning

The RCA inputs for CH1-CH6 and separate level adjustments for the CH1/CH2, CH3/CH4 and CH5/CH6 sections make it easy to set the right ratios between front, back and bass. The input sensitivity of 0,3 V helps to match the amplifier to extensive signal sources.

⮕ Assembly without fighting for a place

The 365 x 198 x 51 mm housing makes it easy to plan the installation in the car, even though you have a full-fledged 6-channel amplifier at your disposal. This is important when you want to expand your system, but still maintain a reasonable use of space.

⭐ Frequently Asked Questions:

1. Will this amplifier power the whole system? - Yes, the 6 channel system allows you to handle the front, rear and additional bass section in one configuration. Channels 1-4 offer 4x100 W RMS at 4 Ω, and channels 5-6 2x150 W RMS at 4 Ω, so the system can be laid out much more precisely than with a classic 4-channel amplifier.
2. Is it suitable for subwoofer? - Yes, channels 5 and 6 can be bridged to 1x450 W RMS at 4 Ω, which allows you to power the subwoofer without adding a separate monoblock. This is a good solution if you want to combine the speaker and bass sections in one amplifier.
3. Will it fit in the car? - The amplifier has 365 x 198 x 51 mm, so for a 6-channel class AB construction it retains a reasonable format. Before assembly, it is worth comparing these dimensions with the place you have prepared in the car.
4. How to connect the signal from the radio? - The model has RCA inputs for CH1-CH6, making it easy to work with an extensive central unit or signal processor. The input sensitivity of 0,3 V and separate level adjustments for the three sections make it easy to fine-tune the entire system.

⚙ Technical specification

• Series: A-Series
• Model: A6150
• Type: 6-channel car amplifier
• Working class: AB
• RMS CH1-CH4 power: 4x100 W at 4 Ω
• RMS power CH5-CH6: 2x150 W at 4 Ω
• RMS power in the bridge: 1x450 W at 4 Ω
• Transmission bandwidth: 20 Hz-35 kHz
• THD: below 0,08%
• Input sensitivity: 0,3 V
• Input resistance: 30 kOhm
• RCA inputs: CH1-CH6
• Dimensions: 365 x 198 x 51 mm

⭐ What do you gain?

✅ One amplifier, less compromise

With 6 channels, you can power more system components from one device and avoid accidentally connecting several weaker amplifiers. This is a simpler way to coherent, predictable sound throughout the car.

✅ Bass and stage under control

The 4x100 W + 2x150 W RMS chip allows you to distribute tasks well between speakers, and the 1x450 W RMS bridge at 4 Ω gives you a spare for the subwoofer. In practice, this means greater dynamics, a clearer front and a stronger bottom without chaos.

REBEC Car Audio - natural sound and passion for music

REBEC Car Audio is a brand that creates equipment for drivers who want to rediscover their favorite music on every journey. Her philosophy is based on natural, faithful sound reproduction and attention to design and performance. REBEC solutions allow you to develop a car audio system - from basic sets to advanced configurations for demanding lovers of good sound.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With a VAT invoice
Parametry	Brand	REBEC
Parametry	Model	WZM-REBEC-A615000000
Parametry	Number of channels	other
Parametry	Amplifier class	A/B
Parametry	Manufacturer code	WZM-REBEC-A615000000
Parametry	THD distortion	0.08%
Parametry	Signal-to-noise ratio	97 dB
Parametry	Packaging status	original
Parametry	Certificates of conformity	CE