Automašīnas akumulatora testeris KONNWEI KW600, 12V, 2,4" LCD, 10–2000 CCA, PL izvēlne

Trumpai apie prekę

Prekė: Automobilio akumuliatoriaus testeris KONNWEI KW600, 12V, LCD 2,4", 10–2000 CCA, PL meniu. Kategorija: Baterijų testeriai.

• Gamintojas: Konnwei
• Modelis: KW600

KONNWEI KW600 12V Battery Tester with LCD 2,4" 10-2000 CCA PL MENU

✅ KONNWEI KW600 - fast and accurate diagnostics of 12 V battery

The most important advantages

• Comprehensive battery control - check its voltage, internal resistance, inrush current, capacity, charge level and degree of wear.
• Readable test result - the device informs whether the battery is functional, needs to be charged or should be replaced.
• Start-up system control - quickly verify the battery operation when starting the engine.
• Charging system test - check the operation of the alternator and detect problems that may lead to battery discharge.
• Voltage preview in the form of a graph - the waveform displayed in real time facilitates the assessment of the stability of the battery operation.
• Testing inside and outside the vehicle - you can carry out diagnostics both without disassembling the battery and after removing it.
• Support for many types of batteries - one tester allows you to control lead-acid batteries, AGM, EFB, GEL, VRLA and maintenance-free.
• Wide range of application - the device is suitable for batteries of gasoline cars, diesel cars, hybrid vehicles, motorcycles and emergency batteries.
• Color screen 2,4 inch - the results in text and graphic form are clear and easy to read.
• Support in Polish - multilingual menu allows you to conveniently use the device without having to translate messages.
• Write and replay results - you can go back to the saved data and compare the measurements carried out.
• The ability to print reports - connection to the computer allows you to prepare clear results of the diagnostics.
• Free updates - support for the KONNWEI BTlink application allows you to update the device system.
• Working without additional batteries - the tester starts when connected to the tested battery.

✅ Wide compatibility with 12 V batteries

KONNWEI KW600 supports batteries with a range of 100-2000 CCA, allowing you to conveniently control various models used in vehicles. The tester works with GEL, EFB, lead-acid, AGM batteries with flat plates and AGM spiral, providing a wide range of diagnostic capabilities.

✅ Quick assessment of battery status

KONNWEI KW600 performs a load test and displays the most important results such as battery condition, internal resistance, inrush current and voltage. A clear message allows you to quickly assess the condition of the battery and see if it needs to be replaced.

✅ Testing the battery inside and outside the vehicle

KONNWEI KW600 allows you to check the battery both directly in the car and after removing it. Thanks to this, you can adjust the diagnostic method to the situation and conveniently perform the test without unnecessary disassembly.

✅ Three tests in one device

KONNWEI KW600 enables battery test, charging system test and start-up test. Thanks to this, with one device you can comprehensively check the condition of the battery and the operation of the most important elements of the vehicle's electrical system.

✅ Support for the most popular measurement standards

KONNWEI KW600 supports CCA, IEC, EN, DIN, CA, BCI, MCA, SAE and JIS standards, enabling testing of a wide range of batteries. The measuring range is 100-2000 CCA for most standards and 100-1400 CCA for IEC and DIN standards.

✅ Contents of the set

• KONNWEI KW600 Battery Tester with Wires and Clamps
• Mini USB cable
• User manual
• Protective case

✅ Technical specification

• Model: KONNWEI KW600
• Installation Voltage: 12 V
• Input voltage range: 8-16 V
• Range of tested batteries: 100-2000 CCA
• Supported tests: battery test, start-up test, charging system test
• Read data: voltage, internal resistance, inrush current, capacitance, state of charge and degree of wear
• Voltage presentation: real-time mileage graph
• Assessment results: efficient, charge or replace
• Supported standards: CA, CCA, BCI, MCA, JIS, SAE, EN, DIN, IEC and GB
• CCA: 10-2000; BCI: 10-2000; CA: 10-2000; MCA: 10-2000; JIS: 26A17-24SH52; DIN: 10-1400; IEC: 10-1400; EN: 10-2000; SAE: 10-2000
• Supported batteries: SLI, deep discharge and marine
• Supported technologies: Wet/Flooded, VRLA, MF, SMF, AGM, EFB and GEL
• Display: TFT LCD color screen 2,4 inch
• Main Processor: STM-32
• Power supply: directly from the tested battery
• Operating temperature: 0°C to 50°C
• Storage temperature: from −20°C to 70°C
• Menu available in many languages including Polish
• Updates: free updates via the KONNWEI BTlink app

Specifications