Automobilio paleidimo įrenginys su kompresoriumi, 2000A, powerbank, LED žibintuvėlis, 12V

Trumpai apie prekę

Prekė: Automobilio paleidimo įrenginys su kompresoriumi, 2000A, powerbank, LED žibintuvėlis, 12V. Kategorija: Paleidimo įrenginiai (boosteriai).

• Gamintojas: EAFC
• Modelis: URZĄDZENIE ROZRUCHOWE DO ODPALANIA AUTA 12V

Do You Have These Troubles?

Car battery dead? Phone out of charge? Pushing a heavy car or calling a tow truck is expensive and exhausting. Flat tire with no pump nearby? Don’t worry – this 4-in-1 device is your all-in-one roadside solution.

One Device, Four Essential Functions:

• Jump Starter – 2000A peak current, instantly start dead batteries
• Air Compressor – 150PSI smart tire pump with auto-stop
• Power Bank – Emergency USB power for your phone or tablet
• LED Flashlight – 3 modes: Bright, Strobe, SOS

Powerful Emergency Starting

2000A peak current and 1000A starting current reliably jump start most 12V vehicles: motorcycles, cars, SUVs, pickups, and minivans. Supports up to 4.0L gasoline and 2.0L diesel engines. Works in extreme temperatures from -20°C to 60°C – reliable even in northern winters or hot summers.

Smart 150PSI Air Compressor

Equipped with an imported permanent magnet motor and twin turbo duct supercharging – spins up to 100,000r/min for double the inflation speed. The built-in AI intelligent chip precisely measures and auto-stops at the preset pressure. Just set the desired pressure and the compressor does the rest, protecting your tires and ensuring driving safety. Maximum pressure: 150PSI.

Emergency Power Bank

When your phone or tablet runs out of battery, use the USB output to get an emergency charge. (Note: Occasional charging is recommended; the conversion efficiency is about 50%, making it ideal for emergency use only.)

Multi-Function LED Flashlight

Three lighting modes in one: standard lighting for camping and pathfinding, strobe mode for danger warning, and SOS mode for requesting support. Never fear the dark again.

Durable & Safe Design

The robust PC+ABS shell can withstand daily bumps. An intelligent clamp connection helps prevent incorrect operation. (Always ensure the device has more than 75% battery before starting a car.)

Simple 4-Step Start:

1. Insert the smart clamp all the way into the jump starter port (ensure battery >75%).
2. Connect red clamp to positive (+), black clamp to negative (-) of the car battery.
3. Start the car within 30 seconds.
4. Remove the clamp immediately after starting (recommended within 20 seconds).

Specifications:

• Peak Current: 2000A
• Starting Current: 1000A
• Starting Voltage: 12V
• Engine Support: 4.0L Gas / 2.0L Diesel
• Compressor Max Pressure: 150PSI
• Charging: DC 12V / USB
• LED Modes: Bright / Strobe / SOS
• Shell Material: PC + ABS
• Operating Temperature: -20℃ ~ 60℃

Important Battery Care (Must Read):

1. First-time use – Please turn on the flashlight to discharge the unit, then fully charge it for at least 4 hours before using it to start a car. This initial charge cycle helps prolong battery life.
2. Do not discharge and charge at the same time.
3. Maintain charge – Recharge every 3 months. A low battery may fail to start your car.
4. Phone charging – Charge phones or tablets only occasionally; efficiency is around 50%, intended for emergencies.
5. Battery behavior – The charging or discharging speed may become faster during the last 15% of the battery capacity. This is a normal characteristic of high-rate lithium batteries and does not affect product quality or usage.

Specifications