Auto palaišanas ierīce ar lukturīti MAPOWER 12V 10000mAh

Trumpai apie prekę

Prekė: Automobilio paleidimo įrenginys su žibintuvėliu MAPOWER 12V 10000mAh. Kategorija: Paleidimo įrenginiai (boosteriai).

• Gamintojas: MAPOWER
• Modelis: jump starter urządzenie rozruchowe

📢Buy from the product set - we add something useful for every DIYer! 🆓🎁

⚙ Technical data

• Brand: MAPOWER
• Model: MPJC02
• Type of device: jump starter / starter device with powerbank function and flashlight
• Battery type: Li-Po
• Battery capacity: 10 000 mAh / 37 Wh / 3.7 V
• Starting voltage: 12 V
• Starting current: to 500 A
• Top current: 1000 A
• Supported petrol engines: up to 3.5 l
• Supported diesel engines: up to 3.0 l
• Smart Clamps: yes
• Reverse polarity protection: yes
• Circuit protection: yes
• USB-C input: 5 V / 2 A
• USB-A output 1: 5 V / 2 A
• USB-A 2 output: 5 V / 1 A
• LED flashlight: yes
• Lighting modes: white continuous, red continuous, white strobe, red strobe
• Working temperature: from -20°C to +60°C
• Product dimensions: 187 × 89 × 44 mm
• Device weight: 385 g
• Packaging: case
• USB-C cable included: yes

✅ Jump starter 3-in-1 – emergency start, powerbank and LED flashlight

MAPOWER MPJC02 is a compact 12 V starter device that combines three practical functions: jump starter, powerbank and LED flashlight. Thanks to it, you can prepare for problems with the car battery, a discharged phone or a vehicle breakdown after dark.

The most important features and advantages:

• Top current 1000 A – support during emergency start of the car.
• Starting current up to 500 A – energy needed to support engine start-up.
• Li-Po 10 000 mAh / 37 Wh battery – own source of energy without the need for constant connection to power.
• For gasoline engines 3.5 l and diesel engines 3.0 l – used in many passenger cars.
• Smart Clamp – intelligent clamps with reverse polarity and short circuit protection.
• Powerbank with two USB-A ports – the ability to charge compatible mobile devices.
• LED flashlight with 4 lighting modes – workplace lighting and additional signaling in emergency situations.
• USB-C 5 V / 2 A input – convenient charging of the device.
• USB-C cable included – you do not need to buy a separate cable to charge the jump starter.
• Compact design and weight of 385 g – convenient storage and transport.
• Practical case – all elements of the set in one place.
• Working temperature range from -20°C to +60°C – adapted to different ambient conditions.

Instead of several separate accessories, you can have one device on hand that will help you during problems with starting the car, provide backup energy for the phone and illuminate the workplace after dark.

🚗 Jump starter 1000 A – start the car without the help of a second vehicle

A discharged battery may surprise you at the least appropriate time – before leaving for work, in the parking lot or during a longer trip.

MAPOWER MPJC02 provides inrush current up to 500 A and peak current 1000 A, so it can help start the car with a 12 V installation without having to connect the wires to the other vehicle.

The device is designed for emergency start-up:

• Gasoline engines up to 3.5 l
• Diesel engines up to 3.0 l

It is enough to have a properly charged jump starter on hand to be able to try to start the engine emergency in case of problems with the battery.

You do not have to wait for the help of another driver or look for a car from which you can connect jumper cables. Our own starting device gives you more independence during your daily commute and further travel.

The startup efficiency depends on m.in. from the ambient temperature, battery status and vehicle condition.

🔋 10 000 mAh battery – energy always at hand

At the heart of the MAPOWER MPJC02 is the lithium-polymer Li-Po battery with a capacity of 10 000 mAh / 37 Wh, which is a source of energy for all functions of the device.

You can use the accumulated energy to:

• Emergency car start assistance – when the vehicle battery does not provide enough energy to start the engine.
• Mobile device charging – when your phone or other compatible device requires additional power.
• Use of LED flashlight – during failure, stopover or work in a dimly lit place.

Thanks to the built-in battery, the device does not require constant connection to an external power source when using its functions.

This is a practical solution for longer routes, trips, camping and emergency situations when access to an outlet may be limited.

🛡 Smart Clamp – intelligent security during start-up

Connecting the starting device to the battery requires proper polarity. Therefore, MAPOWER MPJC02 is equipped with smart Clamps with security system.

The system provides protection against:

• Reverse polarity – helps reduce the risk of accidental pole changes during connection.
• short circuit – additionally protects the system when using the boot function.

Thanks to this, the use of the jump starter is safer and the risk of damage resulting from these errors is reduced.

This additional protection is especially useful in stressful situations when the car does not want to start, and you want to quickly solve the problem.

Clamps should always be connected in accordance with the instruction manual of the device and the vehicle.

📱 Powerbank 10 000 mAh and USB-C charging – energy always at hand

MAPOWER MPJC02 is not only a boot device, but also a practical powerbank with a capacity of 10 000 mAh, which allows you to charge your phone and other compatible mobile devices while traveling.

The device is equipped with 3 USB ports:

• USB-A 5 V / 2 A – output for charging your phone and other mobile devices.
• USB-A 5 V / 1 A – additional output for connecting a second device.
• USB-C 5 V / 2 A – input for charging the jump starter battery.

Two USB-A outputs allow you to charge two compatible devices at the same time, and the included USB-C cable allows you to conveniently replenish the power of the jump starter itself.

Thanks to this, you have at hand a spare source of energy for the phone and a device ready for emergency car start-up – without the need to carry a separate powerbank.

🔦 LED flashlight – 4 lighting modes for different situations

Problems with the car do not always happen during the day. Failure after dark, poorly lit parking or the need to look under the hood are situations in which an additional source of light is useful.

MAPOWER MPJC02 has a built-in LED flashlight with four lighting modes:

• White continuous light – for illuminating the workplace and the environment.
• Red continuous light – additional lighting mode.
• White strobe – pulsating white light.
• Red strobe – pulsating red light useful for signaling.

The white light allows you to perform activities more comfortably at the car, while the additional modes increase the possibilities of using the device in emergency situations.

You do not have to look for a separate flashlight in the trunk – the necessary lighting is already built into the jump starter.

🌡 Temperature range from -20°C to +60°C – prepared for different conditions

MAPOWER MPJC02 has been adapted to work in temperatures from -20°C to +60°C, so it can be used in various weather conditions.

This is particularly important in the case of a device designed for emergency car start-up assistance.

You can use the jump starter both on cooler days and during summer trips, remembering to maintain appropriate conditions of use and storage.

However, it should be remembered that low temperature affects the performance of batteries. During severe frosts, start-up efficiency may be limited, especially for diesel engines.

🧳 Compact jump starter with practical case – everything at hand

MAPOWER MPJC02 is distinguished by small dimensions of 187 × 89 × 44 mm and a weight of only 385 g, so it does not take up much space in the car and is convenient to transport.

The set includes a practical case that allows you to store jump starter, Smart Clamps and USB-C cable in one place. This ensures that all accessories stay organized and easily accessible.

Compact design and convenient case ensure that you can always have your device at hand – both during daily commutes and longer journeys.

📦 Set includes

• Jump starter MAPOWER MPJC02
• Smart Clamp Starter Cables
• USB-C cable for charging the device
• Storage and transport case
• Instructions for using in Polish
• Original manufacturer's packaging

FAQ – Frequently Asked Questions about MAPOWER MPJC02

Will the jump starter MAPOWER MPJC02 start a car with a dead battery?

Yes, the MAPOWER MPJC02 is used for emergency start-up assistance of cars with 12 V installation. The device provides inrush current up to 500 A and peak current 1000 A.

However, start-up efficiency depends on the degree of discharge and condition of the battery, ambient temperature and the efficiency of the vehicle start-up system. Jump starter does not replace repairing a damaged battery.

What engines is MAPOWER MPJC02 suitable for?

The device is designed for emergency start-up of cars with 12 V installation equipped with:

• Gasoline engines up to 3.5 l
• Diesel engines up to 3.0 l

It can be used in many passenger cars that meet these requirements.

Does the jump starter charge the car battery?

No. MAPOWER MPJC02 is used for emergency engine start assistance, not for charging the car battery.

Use a suitable charger or rectifier to fully charge the battery.

What is the difference between inrush current 500 A and peak current 1000 A?

Starting current up to 500 A determines the value of the current supplied during engine start-up assistance.

The peak current of 1000 A indicates the maximum instantaneous current value. It should not be equated with inrush current.

Does MAPOWER MPJC02 have protection against incorrect connection of the blade?

Yes. Smart Clamps have reverse polarity and short circuit protection.

The system helps to reduce the risk of damage associated with these errors. However, clamps should always be connected in accordance with the pole markings and the instruction manual of the device and the vehicle.

Does the jump starter work in winter and during frost?

MAPOWER MPJC02 has an operating temperature range of from -20°C to +60°C.

However, it should be remembered that low temperature can limit the performance of batteries and make it difficult to start the engine. Especially in the case of diesel engines during severe frosts, the demand for inrush current may be higher.

Can MAPOWER MPJC02 be used as a powerbank?

Yes. The device has a Li-Po battery with a capacity of 10 000 mAh / 37 Wh and two USB-A outputs that allow you to charge compatible phones and other mobile devices.

It is a practical solution when traveling, stopping or in places without access to an outlet.

Can two phones be charged at the same time?

MAPOWER MPJC02 has two USB-A outputs: 5 V / 2 A and 5 V / 1 A, allowing you to connect two compatible mobile devices.

The actual possibility of simultaneous charging and its speed depend on the parameters of the devices and the available output power of the jump starter.

How to load jump starter MAPOWER MPJC02?

The device charges via a USB-C 5V/2A input using a compatible power source.

The USB-C cable is included, so you do not need to buy a separate jump starter charging cable.

Does the device have a built-in flashlight?

Yes. MAPOWER MPJC02 has a LED flashlight with four lighting modes:

• White continuous light
• Red continuous light
• White strobe
• Red strobe

The flashlight is useful during breakdowns after dark, car inspection and workplace lighting. Pulse modes may serve as additional signalling, but they do not replace mandatory vehicle warning equipment.

Can the jump starter be used in cars with 24 V installation?

No. MAPOWER MPJC02 is designed for emergency start-up of vehicles with 12 V installation.

Do not use the start-up function to start vehicles with a 24 V installation.

Can MAPOWER MPJC02 be stored in the car?

Yes. With compact dimensions of 187 × 89 × 44 mm and a weight of 385 g, the device is convenient for storage in the car.

The set includes a practical case that helps you organize your jump starter, Smart Clamps, and USB-C cable.

During storage, the device should be protected from mechanical damage, moisture and temperatures beyond the permissible storage conditions.

Why can the car not start despite connecting the jump starter?

The reason may be insufficient level of charge of the device, poor contact with the clam, very deeply discharged or damaged car battery, low temperature or vehicle fault.

Jump starter supports engine start-up, but does not remove faults in the electrical or mechanical system of the car.

What is included in the MAPOWER MPJC02 set?

The set includes:

• Jump starter MAPOWER MPJC02
• Smart Clamp Smart Starter Clamps
• USB-C cable for charging the device
• Practical case for storage and transport

All the most important items can be stored together, making the device convenient to take on the go.

Specifications