Auto raidītāja testeris 12–24V, 4/5 PIN, ar LCD ekrānu

Trumpai apie prekę

Prekė: Automobilio siųstuvo testeris 12–24V, 4/5 PIN, su LCD ekranu. Kategorija: Baterijų testeriai.

• Gamintojas: no brand
• Modelis: 6948522535522

⭐ Fast diagnostics of relays without guessing

Check standard 4-pin and 5-pin car relays quickly and legibly. The tester is powered directly from the 12 to 24 V battery, shows its voltage on the digital display and signals the test result using clear controls.

✅ Key features in one compact unit

✔ Support 4 PIN and 5 PIN relays

✔ Digital preview of battery voltage

✔ Automatic test sequence

✔ Clear GOOD / DEAD indicators

✔ Power supply directly from the battery – without additional batteries

One small device allows you to quickly check the status of the relay and control the voltage of the power source. Built-in wires with red and black terminal allow convenient connection directly to the battery clam.

✔ For standard 4 PIN and 5 PIN relays

The tester is equipped with a 4PIN / 5PIN switch, thanks to which you can choose the right mode for the tested relay.

After selecting the correct position and placing the relay in the socket, the device begins to control its configuration and operation. The solution is designed for standard car relays with a compatible output system.

➡ Before the test, it is worth comparing the relay pin system with the diagram on the tester.

➡ Simple operation – test in a few steps

1. Connect the red terminal to the positive (+) pole and the black to the negative (–) battery.

2. Set the switch to 4PIN or 5PIN respectively.

3. Place the relay in the appropriate slot.

4. Press the TEST button and wait for the automatic cycle to complete.

You do not need to perform complicated settings or manually carry out subsequent measurements – the tester conducts the control automatically.

✅ Clear test result – GOOD or DEAD

After pressing the TEST button, the device automatically analyzes the operation of the relay. The sequence includes m.in. pin configuration control, a series of activation and release time tests, and repeatability checks. The instructions of this type of tester provide 10 consecutive checks of the relay operation.

✅ Green GOOD control – test completed correctly.

➡ RED DEAD indicator light – an abnormality, incompatible system or problem with the tested relay was detected.

This makes the result easy to interpret even when you need to quickly check several elements one by one.

✨ 12 – 24 V installations and digital voltage preview

When the terminals are connected to the battery, a clear digital display shows the voltage of the power source.

The tester is designed to work in the range of 12 to 24 V, so it can be used for typical 12 V and 24 V car installations. This is especially practical during quick inspection of the vehicle's electrics, because before the relay test you can immediately see the current battery voltage.

✔ Compact size – easy storage and transport

The tester housing is about 13,9 × 6,3 × 2,7 cm, so the device fits easily in a toolbox, workshop drawer or service equipment. These dimensions are also consistent with the documentation of this type of device.

The large, insulated terminals make it easy to securely connect to the battery, and the integrated wires mean that you always have the most important components needed for the test at your device.

✨ The most important parameters:

➡ Relays: 4 PIN / 5 PIN

➡ Operating voltage: 12 – 24 V

➡ Recommended Coil Resistance: ≥20 Ω

➡ Display: digital

➡ Dimensions: approx. 139 × 63 × 27 mm

➡ Practical diagnostics without an extensive measuring station

The tester can be powered directly from the vehicle battery, so checking the removed relay can be carried out immediately next to the car.

Just connect the terminals, select the 4PIN/5PIN mode, place the relay and run the test. Digital display and indicators allow you to quickly assess the result without preparing an extensive measuring station.

⭐ The tester is used to control the relay itself and provides practical diagnostic support – it does not replace the full diagnostics of the entire electrical system of the vehicle.

⭐ For garage, workshop and mobile service

A practical tool for people who want to quickly check whether a standard relay can be the cause of the problem during electrical system diagnostics.

It will work both in the car workshop, when working in the garage, as well as during occasional repairs performed independently. The compact design makes it easy to store, and the simple operation allows you to quickly go from connection to test result.

⬇ Contents of the set

✅ 1 × relay tester

✅ test leads with red and black terminal

✅ 1 × instruction manual

The relays shown in the pictures are used to present the method of use and are not part of the set.

⚠ Important: Before starting the test, make sure that the voltage of the power source is in the range of 12 to 24 V, maintain the correct polarity of the terminals and use relays with the appropriate pin arrangement. Recommended coil resistance: ≥20 Ω.

Specifications