Automobilio užvedimo laidai LONG, 600A, 4 m, 10 mm²

Trumpai apie prekę

Prekė: Automobilio užvedimo laidai LONG, 600A, 4 m, 10 mm². Kategorija: Užvedimo laidai.

• Gamintojas: no brand
• Ilgis: 4 m

❗❕600 AMPS, 4 METERS, PRACTICAL COVER, SOLID CLAMPS❕❗

✅ 600 AMPER

✅ THICK CABLES

✅ WIDE FROGS

✅ COVER

✅ MAXIMUM CURRENT CONDUCTION

• Maximum intensity: 600A
• Length: 2 x 4m
• Electrical wire cross-sectional area: 10 mm²
• Practical cover
• Wide terminal spacing - this guarantees good current conduction

❗❕NOTE❕❗Remember not to hold both cables in your hands at the same time. It is recommended to connect the positive cable (+) first, then only take in hand and connect the negative cable (-)

1. Make sure that both batteries have the same voltage. (12V or 24V)
2. Connect the positive (+) red terminal to the battery that has current.
3. Connect the second positive (+) red terminal to the emergency-fired battery.
4. Connect the negative terminal (-) black to the battery that has current.
5. Connect the second negative terminal (-) black to the emergency-fired battery.
6. Start the engine of a working vehicle and wait a while.
7. Start the engine of the unloaded vehicle.
8. Dismantle the cables in reverse order - first unfasten the negative terminal (-) from the battery fired emergency, then from the vehicle in working order.
9. Unhook the positive (+) terminal from the emergency-fired battery, then from the vehicle in working order.

• jumper cables 600A 4M
• ORIGINAL PACKAGING

Specifications