Automobilio užvedimo laidai su LED lemputėmis, 10 mm², 2 x 3 m, 500A

Trumpai apie prekę

Prekė: Automobilio užvedimo laidai su LED lemputėmis, 10 mm², 2 x 3 m, 500A. Kategorija: Užvedimo laidai.

• Gamintojas: Sena
• Ilgis: 3 m

⭐ Cables jumper wires with LED lighting flexible 10mm² 2x3m 500A ⭐

✨ SENA Starting Cables with LED Lighting – Your Reliable Start! ✨

A set of high-quality flexible jumper cables by SENA with innovative LED lighting in terminals. Designed to provide reliable and safe start-up assistance for vehicles with an engine capacity of up to 2000 cm³, guaranteeing easy connection even in difficult lighting conditions. Perfect for winter!

✨ Start your car without any problems – even in the dark! ✨

• Intensity: 500 A
• Length: 2 x 3 meters
• Wire cross-section: 10 mm² (rubber, flexible)
• LED lighting: Built-in terminals, facilitates connection in low light (replaceable batteries DC 2x 1,5V, AG13/LR44/A67).
• Compatibility: For vehicles with engine capacity up to 2000 cm³

How to use jumper cables with LED? Simple steps to a quick start! ✨

Starting a vehicle with a dead battery has never been easier or safer, even after dark! Follow the instructions below:

1. Connect the red (+) cable to the positive pole of the discharged battery and then to the positive pole of the battery of the working vehicle.
2. Connect the black (-) cable to the negative pole of the battery of the working vehicle. Pin the other end of the black cable to the metal, unpainted engine component of the vehicle with a discharged battery (e.g. engine block), away from moving parts.
3. Start the engine of a working vehicle and leave it idling for a few minutes. Then try to start the vehicle with a dead battery.
4. After a successful start-up, disconnect the cables in reverse order (first black from the starting vehicle, then black from the working vehicle, then red from the working vehicle, and finally red from the starting vehicle).

Innovative LEDs in SENA cable terminals turn on automatically when they are opened, providing excellent illumination of the connection point. This is a key feature that eliminates the risk of misconnection and greatly facilitates the whole process, especially in poor visibility.

Technical parameters – What makes SENA cables unique?

• Manufacturer: SENA
• Intensity: 500 A – sufficient for emergency start-up of many types of vehicles.
• Length: 2 x 3 meters – optimal length for comfortable use without the need for close parking of vehicles.
• Cable: Rubber 10 mm² – guarantees flexibility and strength even at low temperatures.
• Clamps: Insulated – made of durable composite, ensure safety when connecting.
• Lighting: LED in terminals – facilitates connection in low visibility conditions (powered by replaceable DC 2x 1,5V, AG13/LR44/A67 batteries).
• Engine capacity: Up to 2000 cm³ – compatible with most passenger cars.
• Gross weight: 1,20 kg – testifies to the reliability and quality of materials.
• EAN code: 5901299011294
• Manufacturer's catalogue number: 011294

What is worth knowing about SENA jumper cables with LED?

❓ Are cables resistant to low temperatures?

✅ Yes, the wires are made of 10 mm² rubber, which gives them flexibility and reliability even on very cold days.

❓ What batteries are needed for LEDs?

✅ The LEDs are powered by DC 2x 1,5V batteries, type AG13 (also known as LR44 or A67), which are easily accessible and replaceable.

❓ Does the manufacturer change the appearance of the packaging?

✅ Yes, the manufacturer SENA often modernizes the graphic design of its products. Regardless of the possible differences in the external appearance of the packaging, you will always receive the same, proven and high-quality product to which you are accustomed!

❓ Are these cables suitable for diesel engines?

✅ The cables are designed for vehicles with an engine capacity of up to 2000 cm³, which includes both petrol engines and smaller diesel engines.

Specifications