Belaidis baseino valymo robotas Wybot A1

Trumpai apie prekę

Prekė: Belaidis baseino valymo robotas Wybot A1. Kategorija: Dulkių siurbliai.

• Gamintojas: WYBOT
• Modelis: A1
• Galia: 33 W

Wybot A1 is a modern pool robot that provides effective and convenient cleaning of the bottom of the pool without the need for manual intervention. Thanks to the double drive, the improved filtration system and the intensive edge cleaning function, it copes with all contaminants – from sand to leaves and hair. It is a perfect solution for people who want to enjoy crystal clear water without unnecessary effort.

⚙ Specification:

• Manufacturer: Wybot
• Model: A1
• Swimming pool dimensions: 80m2~100m2
• Depth of work: Max.3m and Min.60cm
• Dimensions: 345*315*170 mm
• Weight: 3.5kg
• Working time: 2h
• Charging time: 2.5 h
• Voltage: 22.2V
• Power: 33W
• Charger input: 100-240V, 50-60Hz
• Charger output: 25.2V/1A
• Battery capacity: 2600mAh
• Filter: Two-level filtration
• Flow rate: 8.1 m3/H
• Movement speed: 16m/min
• Water resistance: IPX8

🟢Included:

• Robot x1
• Leverage x1
• Filter (cotton foam +180μm)
• Hook x1
• User manual x1
• Quick Start Guide x1
• Charger x1
• Screw x1

✅ Advantages:

🟢 Efficient operation and fast charging – The device works for up to 120 minutes on a single charge, effectively cleaning surfaces up to 100 m². The charging time is only 2,5 hours, so the robot is quickly ready for the next use.

🟢 Intelligent edge cleaning – The WINS Edge Cleaning feature allows the robot to thoroughly remove dirt at walls and corners. This makes cleaning more comprehensive than standard models.

🟢 Advanced filtration system – Two-layer filter with an accuracy of 180 µm effectively removes even the smallest dirt particles. This guarantees clear water and less use of chemicals.

🟢Efficient operation and fast charging🟢

Wybot A1 offers 120 minutes of continuous operation, which allows you to clean the surface up to 100 square meters regardless of its shape – it performs perfectly in rectangular, round, kidney-shaped and other irregular shapes. After the end of the cycle, charging takes only 2,5 hours, which makes the device ready for the next cleaning session in a short time.

🟢Intelligent edge cleaning🟢

The robot is equipped with the WINS Edge Cleaning function, which makes it stop for a few seconds after touching the pool wall to clean the edges more thoroughly. Thanks to this, it eliminates dirt from places that are often overlooked by standard cleaning devices.

🟢Improved filtration system🟢

Wybot A1 uses a two-layer filtration system that effectively captures any contaminants, including sand, small leaves, pebbles, small twigs, hair and dust. The 180 µm filter captures even the smallest dirt particles, ensuring crystal clear water. For best results, it is recommended to clean the filter every 30 minutes in heavily soiled pools.

🟢Simple operation and LED🟢 indicators

The robot is designed for maximum convenience of use. Intuitive one-button control allows you to quickly start the device, and built-in LED indicators inform about the operating status, battery level and selected cleaning mode.

🟢Lightweight design and easy removal🟢

With its compact design, the Wybot A1 is easy to handle and carry. It can be easily pulled out of the water, making it a convenient solution for both above-ground and built-in pool owners. The robot works well in pools up to 3 meters deep.

🟢 Versatility and eco-friendly solution🟢

Wybot A1 is designed for cleaning flat pool surfaces, regardless of the material – it performs perfectly on vinyl, ceramics, mosaics, fiberglass, polyethylene and cement. Its efficiency not only saves time and energy, but also contributes to reducing the consumption of chemicals, making it an eco-friendly choice for any pool owner.

❓ Frequently Asked Questions (FAQ) ❓

Does the Wybot A1 also clean the pool walls and water line?

• ❌ Not, this model is designed exclusively for cleaning flat surfaces of the bottom of the pool and does not climb vertically on the walls. However, it has the function of intelligent edge cleaning (WINS Edge Cleaning), thanks to which the robot stops at the walls and thoroughly suctions the dirt accumulated in the corners and corners of the bottom.

Is the robot suitable for rack and expansion pools?

• ✅ Yes, Wybot A1 is 100% safe for rack and expansion pools. Since it weighs only 3,5 kg and cleans only the bottom, it does not carry any risk of damage to the flexible structure. It does not enter the walls, so it does not bend the flaccid PVC side walls, does not burden metal frames or distort the inflatable flange.

Does the device work wirelessly in water?

• ✅ Yes – the robot is 100% wireless, which means complete freedom of movement without tangled cables and complete safety in the water. The powerful battery allows for a full 2 hours of continuous operation, and it takes only 2,5 hours outside the pool to recharge with the included mains charger.

Is there a remote control or phone app included?

• ❌ Not, the robot does not have a remote control or Wi-Fi/Bluetooth module to control the application. The device is designed for simple, maintenance-free operation – you intuitively run it with one hermetic button on the housing, and the advanced algorithm itself ensures optimal and even coverage of the entire bottom of the pool.

How to get the robot out of the water after cleaning?

• ✅ Conveniently and effortlessly – in the set with the robot you get a special profiled hook. Just attach it to a standard telescopic pole with a universal diameter (no stick included) to easily and safely fish out this lightweight device (only 3,5 kg) from a depth of up to 3 meters, without having to enter the water.

Specifications