Benzininis generatorius BLACKSMITH 5,2 kW su variniu statoriumi, AVR ir veikimo valandų skaitikliu

Trumpai apie prekę

Prekė: Benzininis generatorius BLACKSMITH 5,2 kW su variniu statoriumi, AVR ir veikimo valandų skaitikliu. Kategorija: Elektros generatoriai.

• Gamintojas: Kowal Polska
• Modelis: A1+
• Įtampa: 230 V

✅ Maximum generator power 3,5 kW

✅ Full power available in one phase 230 V

✅ Copper stator winding

✅ Extended stator with a length of 120 mm

✅ 4-stroke OHV 7 HP engine

✅ AVR Voltage Stabilizer

✅ Built-in on-board computer

✅ Motor hours counter

✅ Intelligent throttle responding to load change

✅ Output 12 V

✅ Mute silencer chamber

✅ 0,6 l of oil FREE

Model A1 PRO is a single-phase 230 V unit, therefore its power is not divided between three phases.

The full power of the generator is available for 230 V devices, which is particularly important when powering receivers requiring more power.

A1 PRO will work very well as a power source for:

✅ power tools and construction equipment

✅ workshop and garage equipment

✅ devices on the plot

✅ basic household appliances

✅ emergency home power supply

✅ appliances such as a kettle, microwave or oven – taking into account their actual power consumption

The stator and rotor are among the most important and most expensive elements of the entire unit.

Therefore, the blacksmith A1 PRO model uses a generator with:

✅ stator core with a length of up to 120 mm

✅ winding made of full copper wire

✅ increased amount of wound wire

✅ extended generator design

There was no cheaper solution in the form of an aluminum wire covered only with a layer of copper.

A greater power reserve allows the same receivers to use a smaller part of the maximum capabilities of the generator, ensuring more favorable operating conditions for the entire generator set.

• motor power / max generator power at 60Hz: 5,2 kw / 3,5 kw
• constant power at 50Hz: 2800 watt
• full power from one socket!
• fuel: PURE PETROL 95 OR 98
• fuel tank capacity about 15 L
• startup: manual
• nominal voltage: 230V
• nominal frequency at 3000rpm: 50Hz
• built-in AVR - voltage regulator
• weight with packaging approx. 43 kg
• dimensions: 45cmx60cmx44cm
• built-in rectifier output 12 volt
• engine displacement approx. 200cc
• used oil 10w-40 or SAE30
• oil pan capacity approx. 0,6 L
• oil condition equal to the lower edge of the infusion
• 1 replacement after 5 hours, then every 50.
• automatic regulation of rotation and voltage
• voltmeter
• Quiet engine operation
• Relaxer for easy start-up
• embedded on cushioning cushions
• high engine power
• high quality of workmanship
• engine speed approx. 3.000 r/min
• low combustion: from 0,7 - 1,1 L/h
• Please refer to the instruction manual before using!

At the heart of the unit is the popular AL170 engine with 7 HP power, based on the Japanese OHV design.

On behalf of the KowaL Polska brand, the engine was made using high-quality key structural elements, such as:

✅ shaft

✅ plunger

✅ connecting rod

✅ valves

The engine has been properly selected for the extended generator of the A1 PRO model, creating a coherent and well-matched drive unit.

blacksmith A1 PRO is equipped with an automatic throttle control system, which responds to changes in the load of the generator.

The system shall help to maintain an appropriate working turnover of approximately:

When changing the power demand, the system regulates the engine operation and the amount of fuel supplied accordingly.

In practice, this means:

✅ automatic response to load change

✅ more stable engine operation

✅ optimal fuel use

✅ no need to constantly manually correct the throttle

The whole cooperates with the SPD carburetor, selected for the characteristics of the drive unit.

When you buy the blacksmith A1 unit, you get a set of accessories needed to start working comfortably:

✅ 2× plug 230 V

✅ Wires for output 12 V

✅ Chrome fuel tank cap – solid and aesthetic finish

✅ Fuel filter – helps protect the power supply system from contamination

✅ Readable fuel level indicator – quick control of the amount of fuel without opening the tank

✅ Mute exhaust system – reduces noise and improves the comfort of the unit

✅ The AVR automatic voltage regulator stabilizes the output voltage on an ongoing basis and reduces its fluctuations during load changes.

Thanks to this, the blacksmith A1 model provides more stable power supply parameters and works well as an emergency source of energy for home, workshop, garage or plot, as well as for powering many popular power tools and utility devices.

✅ The unit is packed in thick, fitted carton and secured with transport belts, which limit the possibility of movement of the device during transport.

Thanks to solid protection, the product is better protected against damage that may arise during transport.

The latest blacksmith A1 PRO has been equipped with a clear on-board computer that allows you to control the most important parameters of the unit on an ongoing basis.

On the display you can check:

⭐ output voltage [V]

⭐ frequency of generated current [Hz]

⭐ working time since last launch

⭐ total mileage of the unit expressed in hours

Operation is extremely simple – one button allows you to quickly switch between individual parameters.

Thanks to the hour counter, it is also easier to control the dates of oil change and periodic service, which helps to properly operate the unit for a long time.

✅ Aggregate blacksmith A1 PRO

✅ 2× plug 230 V

✅ cables 12 V

✅ fuel filter

✅ candle wrench

✅ nuts and mounting screws

✅ instruction manual in Polish

✅ guarantee card

✅ manufacturer's declaration of conformity

The oil can be delivered as 1× 0,6 l or 2× 0,3 l.

Specifications