Dīzeļgāzes gaisa sildītājs 40 kW ar termostatu un LCD ekrānu

Trumpai apie prekę

Prekė: Dyzelinis oro šildytuvas 40 kW su termostatu ir LCD ekranu. Kategorija: Oro šildytuvai.

• Gamintojas: RED TECHNIC
• Modelis: RTNGO0126

40 KW | THERMOSTAT 5 – 55°C | LCD | 920 M³/H | TANK 19 L

Model: RTNGO0126

The 40 kW oil heater is used to heat workshops, warehouses, halls and spaces during renovation and construction works. You gain 920 m³/h blowing, temperature control with a thermostat of 5 – 55 ° C, digital display and mobile design on wheels, which makes it easy to prepare the device in the desired place.

🔴 WHY CHOOSE OUR PRODUCT?

🔻 YOU HEAT A LARGE SPACE WITH 40 KW

In the workshop, warehouse or hall you use 40 kW of heating power and air flow of 920 m³/h. You get an additional heat source also during renovation and construction works.

🔻 SET THE TEMPERATURE YOU NEED

The built-in thermostat operates in the range of 5 to 55°C, so you can adjust the setting to the current conditions. The digital display allows you to check settings directly on the device panel.

🔻 YOU CHANGE POSITION WITHOUT MOVING THE DEVICE

Two transport wheels and a rear handle help roll the shut down and cooled heater. With a weight of 16,60 kg, you do not have to lift the entire structure every time you change places.

🔴 WHY DOES THIS MODEL STAND OUT FROM THE REST?

🔻 CONTROL OF TWO FUEL PARAMETERS

Simpler designs do not always have separate fuel gauges. Here you control its level and pressure during operation.

🔻 TWO TYPES OF FUEL

Some devices have more limited power supply capabilities. This model uses diesel or light fuel oil.

🔻 MOBILE DESIGN ON THE FRAME

Many devices require lifting when changing places. Here, the wheels, handle and support help prepare the next station.

🔴 40 KW FOR HEATING LARGE SPACES

Heating power 40 kW allows you to use the device to heat workshops, warehouses, halls and other workspaces.

Exhaust temperature from 60°C to 300°C ensures the supply of heated air during operation of the device.

Application during renovation and construction works gives the opportunity to prepare an additional heat source where it is needed.

When choosing the workplace of the heater, provide adequate ventilation.

🔴 5-BLADE FAN WITH A FLOW RATE OF 920 M³/H

Air flow of 920 m³/h is responsible for the distribution of heated air in the space where the heater operates.

The 5-blade fan produces a forced blower to support the heating of larger work spaces.

The fan power of 200 W is a parameter of the system responsible for the air flow through the device. Power supply 230 V / 50 Hz allows you to connect the heater to the appropriate electrical system.

⚫ PREPARE THE WORKSHOP TO WORK ON A COLD DAY

Instead of working in a cold space, you run 40 kW of heating power where you need it. Termostat allows you to set the temperature appropriate to the operating conditions.

🔴 TECHNICAL DATA

• Power: 40 kW
• Fan power: 200 W
• Power supply: 230 V / 50 Hz
• Airflow: 920 m³/h
• Fuel tank capacity: 19 l
• Average fuel consumption: 2,4 l/h
• Type of fuel: diesel; light fuel oil
• Degree of regulator protection: IP44
• Dimensions: 860 × 430 × 580 mm
• Thermostat range: 5 – 55°C
• Outlet temperature: 60 – 300°C
• Weight of the device: 16,60 kg

🔴 CONTENTS OF THE SET

• Oil heater RED Technic RTNGO0126
• User manual
• Original packaging

⚫ HEAT WHERE YOU NEED IT

Thanks to the transport wheels and handle you can prepare the heater for the next station. You gain a mobile heat source for a workshop, warehouse or hall.

🔴 USE IN WORKSPACES AND MORE

You can use the oil heater to heat workshops, production halls and warehouses where you need to raise the temperature during operation. It will also work well in construction and renovation works, as an additional source of heat in the prepared rooms.

You can apply it in economic buildings, greenhouses and tunnels, adjusting the device setting to the conditions of the facility. The 40 kW power and 920 m³/h blowing allow you to deliver heated air to the selected workspace.

🔴 TEMPERATURE CONTROL IN THE RANGE OF 5 – 55°C

The built-in thermostat allows you to set the temperature you need directly from the heater panel.

The adjustment range from 5°C to 55°C allows you to adjust the setting to the current conditions in the heated space. Digital display makes it easy to check settings when preparing the device for work.

Adjustment focused on the control panel gives you direct access to basic temperature settings.

🔴 19 L TANK WITH FUEL LEVEL INDICATOR

The 19 l tank holds the fuel needed to operate the heater without the use of an additional external tank.

The average fuel consumption is 2,4 l/h, which allows you to determine the demand before heating.

The external fuel level speculum allows you to control the amount of fuel in the tank during use of the device. Diesel oil or light fuel oil can be used as fuel for this model.

🔴 MOBILE DESIGN TO CHANGE POSITION

Two transport wheels make it easy to roll the heater on the ground without having to lift the entire structure each time.

Rear transport handle provides a place to grab the device while preparing your next workstation. Frame support leg stabilizes the structure after setting the heater in the selected place.

Movement after switching off and cooling allows you to safely prepare the device for resetting.

⚫ HEATING WHERE YOU WORK

▪ In the workshop, warehouse or hall you use 40 kW of heating power and 920 m³/h.

▪ Termostat and transport wheels make it easy to adjust the device to the current position.

⚫ FAQ

▪ WHAT FUEL CAN THE HEATER BE POWERED WITH?

The heater can work on diesel or light fuel oil.

▪ WHAT IS THE THERMOSTAT ADJUSTMENT RANGE?

The temperature can be set from 5°C to 55°C.

▪ WHAT IS THE AVERAGE FUEL CONSUMPTION?

The average fuel consumption is 2,4 l/h and the tank capacity is 19 l.

▪ WHERE CAN THE HEATER BE USED?

The device can be used, among others, in workshops, warehouses, production halls, outbuildings, greenhouses, tunnels and during renovation and construction works, while ensuring proper ventilation.

▪ CAN THE HEATER BE EASILY MOVED?

Yes. The device has two transport wheels and a rear handle. The heater should be moved after it is turned off and cooled.

Specifications