Ekskavatorių lazerinis lygio jutiklis MC-1D valdymo sistemai

Trumpai apie prekę

Prekė: Ekskavatorių lazerinis lygio jutiklis MC-1D valdymo sistemai. Kategorija: Lazeriniai gulsčiukai.

• Gamintojas: Vevor
• Modelis: MC-1D

MC-1D is a leveling system that allows you to control the height of the working element of the machine from the operator's cabin. In this way, the operator has a constant view of the height of the bucket or blade of the machine relative to the assumed reference line (designated by the laser leveler). Observing the indications on the machine sensor (or display in the cabin), the operator obtains information whether he can still collect material / dig - whether he is already at the assumed depth, thus eliminating cavities, digging.

The system consists of a laser sensor that receives a signal from the laser leveler and uses LED indicators to inform the operator about the current height at which the working element is to be set (spoon, blade). This information will also appear on the cabin receiver, which performs the functions of the display. The set configured in this way allows you to quickly and efficiently carry out earthworks, also with a drop - without the need for control measurements.

• Universal solution for many types of machines (bulldozers, excavators, backhoe loaders)
• Faster operation, higher efficiency - the machine can do more at the same time
• Increased accuracy of work
• Savings on material resulting from more accurate surface alignment
• The easiest solution for controlling machine operation – simple, intuitive operation
• No corrections, no digging - less risk of human error
• Time saving - less indirect measurements, limiting the number of inspections during operation (work can be controlled on an ongoing basis without leaving the cabin)
• Operation control in the operator's cab - signal transmission to the cabin display

Control machine operation, work faster, more accurately and more economically

When performing earthworks with machines, there is a problem associated with leveling. So far, additional people for measurements (or surveying teams) have been involved in this process.

This process can be automated, simplified and shortened using laser technology, which facilitates and accelerates work at every stage. In this solution, the laser electronic system, thanks to the sensor installed on the excavator arm, can control the height and drop of the excavation. The work is more accurate and faster. The VEVOR MC-1D system is a ready-made mobile set, assembly is not a problem and can be carried out by the machine operator immediately before leveling, and after work the elements can be hidden in the suitcase.

The MC-1D laser sensor is attached to the machine via strong magnets. In addition, the MC-1D has the ability to transmit via the signal cable to the receiver, and this (performing the functions of the display in the cabin) informs the operator about the current setting of the bucket, blade – this is important when the condition of operation prevents the operator from observing the MC-1D sensor. If the desired drop is set on the leveler, the operator can realize it based on the sensor indications, without measurements, without conversion and without the risk of error – and above all much faster!

The leveler emits a laser beam invisible to the eye, received by the MC-1D sensor. Beam, spinning around a vertical or inclined axis at a speed of several hundred rpm. /min., forms a horizontal or inclined plane, in one or two directions. This plane (which can be precisely positioned on the laser control panel) provides a reference plane for the sensor installed on the machine. The operator, digging, observes the indications of colored diodes on the sensors. They show the current position of the spoon relative to the reference plane and give simple messages: "Leave the spoon or blade", "Pick up the spoon or blade", "Hold on". This information is also presented in the operator’s cabin via the receiver.

• Working mode: accurate (±10mm), rough (±20mm)
• Beam reception range: 25 cm, 360°
• Type of received beam: laser (red)
• Attachment: for magnets
• Battery: 7,2V NiMh (2500mAh)
• Working time: 40 hours
• Charging time: 15 hours.
• Working temperatures: -20ºC ~ +50ºC
• Resilience class: IP 54
• Dimensions: 280 x 280 x 130 mm
• Weight: 5,5 kg

• MC-1D - machine sensor with built-in battery
• cabin display
• Cable connecting the sensor to the cabin display
• Cable for connecting power from a 12V/24V battery (clamps)
• Charger
• Transport case
• User manual

Specifications