Elektriskais lodēšanas izņēmējs 30W Lux ar lodēšanas pinumu

Trumpai apie prekę

Prekė: Elektrinis lituotuvo išlituoklis 30W Lux su alavo pynute. Kategorija: Lituokliai.

• Gamintojas: Hotair
• Modelis: SET1326
• Galia: 30 W
• Įtampa: 230 V

An indispensable set for basic soldering work using a soldering iron and tips type 900M.

1. Electric extractor V9 30W
2. Cleaning needle
3. Cleaning nozzle

Additionally

• Tin with flux in vial - 1 mm 14g PbFree
• Braided tapes ZD-180 1.0 mm - 1pcs
• RF 800 flux for soldering SMD BGA 15 ml - 1pcs

Professional electric tin extractor that heats up quickly to operating temperature.

It is a robust design with high suction power, allowing you to work with one hand. The extractor is built with a durable, long-lasting tip.

Technical parameters:

• Power 30W
• Power supply 220-240V/50Hz
• Tip material
• Dimension: 260x35x27 LengthxWidthxHeight
• Nozzle hole diameter: 1.2 mm
• Cable length: approx. 1.4m

Electric extractor for tin with cutter and additional tip. The electric extractor is used to remove solder binder like tin. The extractor heats up quickly to the operating temperature. The design of the extractor is ergonomic, making the work comfortable and ergonomic. It has a work light. The set includes a quick-clean cutter and one spare tip. ------ The extractor is easy to keep in good condition, by regular cleaning.

The cleaning action is simple.

Cleaning the filter is convenient and quick.

Exchange of grotto

RF 800 is a medium-active rosin flux, perfectly moistens Cu and PbSn surfaces.

Flux type NO CLEAN - after the soldering process leaves no trace - no need to clean!!!

Flux based on spirit, which after the soldering process completely evaporates.

Soldering binder used in the electronics industry, for the production of standard electronic devices and components, electrical engineering.

Tin is placed in the vial to facilitate work and prevent the destruction of the binder.

Characteristic:

Characteristic:

• Packaging: vial
• Diameter: 1mm
• Composition: Sn99,3Cu0,7 SW26/2.5%
• Weight: 14g

Tin suction tape is essential and indispensable when performing repairs in electronic services. The tape is used in both SMD and threading components. The braid is used to remove tin and remove excess tin from soldering points by adhesion method. It is a weave of high purity copper wires. Wires have no oil or oxide impurities. The braid is covered with a layer of crystalline rosin (flux). This shortens the absorption time of tin and does not cause the effect of overheating of the element. Rosin (flux) protects the braid against its oxidation.

Parameters :

• Length: 0.5 m
• Size: 1.0 mm

You need other soldering or service accessories - check out our other listings.

SET1326

Specifications