Enerģijas patēriņa mērītājs MEF-3-OPTI-100 un F&F FOX LK-BZ-3 lampa, komplekts

Trumpai apie prekę

Prekė: Energijos sąnaudų matuoklis MEF-3-OPTI-100 ir F&F FOX LK-BZ-3 lempa, rinkinys. Kategorija: Rinkiniai.

• Gamintojas: F&F
• Modelis: WI-MEF-3-OPTI-100SET

Set:

• Three-phase monitor-electricity consumption meter with internal antenna.
• Indicator light with protection LK-BZ-3

It works wirelessly over a wi-fi network.

Measuring range up to 100 A.

With transformers 100 A.

Monitoring of all relevant electrical network parameters.

Wi-MEF-3-OPTI-100 power consumption monitor:

• Monitoring energy consumption in domestic installations;
• Current measurement of power consumption and values of currents and voltages;
• The use of recorded measurements to detect voltage overruns or power consumption;
• Control of energy production in photovoltaic installations;
• Measurement of heat pumps.

LK-BZ-3 control lamp:

• Protection against the effects of an increase in current over the permissible value.
• Classic 5×20 mm fuse inserts for safe disconnection of the circuit in case of failure or service work.
• Visual control of the absence of power supply or damage to fuse inserts.
• Possibility of using fuse inserts with current up to 6.3 A and using LK-BZ-3 to secure additional circuits.

ENERGY 3-OPTI-100 - wireless (works in wi-fi network) electricity consumption meter. It records electricity consumption and monitors important network parameters - voltage, current, power, energy consumption. Access to data is possible directly from the application or via a web browser. Communication is done wirelessly via Wi-Fi and the F&F cloud.

Properties of Energy 3-OPTI-100 wireless home energy meter:

• 3 phase, 2 way, 4 quadrant electricity consumption monitor, excellent i.a. for the supervision of photovoltaic installations and the metering of heat pumps;
• Monitors all relevant parameters of the electrical network;
• Records average, minimum and maximum values;
• Non-invasive installation on measured wires using miniature (31,5×31,5×40,5 mm) current transformers;
• Measuring range up to 100 A, adapted for domestic installations;
• High measurement accuracy;
• Access to measurement history through an application or web browser;
• Communication via home Wi-Fi network. Remote access is guaranteed by the Polish F&F cloud;
• Support using free mobile apps for Android and iOS;
• Fully Polish solution focused on security and protection of user privacy;
• No hidden operating costs and guarantee long-term product support;
• Installation of a wifi monitor-counter in the distribution box (DIN rail);
• Comes with 3 current transformers.
• The set together with the device are supplied miniature, openable current transformers. No interference with current wires is required to fasten them on the measured wires. However, special attention should be paid to the way the cable is transferred through the transformer and the connection of the secondary side of the transformer to the device.

Technical data:

• Supply voltage: 3× 230/400 V AC (-25%÷15%)
• Frequency: 50÷60 Hz
• Installation: 3-phase, 4-wire
• Meter Accuracy: 1%
• Accuracy - measuring transformers: 0,5%
• Transformers - primary current: 100 A
• Transformers - secondary current: 30 mA
• Transformers - cable diameter: ≤16 mm
• Fixed meter: 1000 imp/kWh
• Humidity (non-condensing): ≤ 90%
• Radio Frequency: 2,4 GHz
• Transmission: WI-FI
• Radio power (IEEE 802.11n): ≤ 20 dBm
• Receiver Sensitivity: -98 dBm
• Connection: screw terminals 2,5 mm² (link); screw terminals 4,0 mm² (wire)
• Tightening torque: 0,5 Nm
• Power Consumption: ≤ 2 W
• Operating temperature: -20÷50°C
• Dimensions: 2 modules (35 mm)
• Mounting: on 35 mm rail
• Degree of protection: IP20

Specifications