Garų lygintuvas su keramine padu, lašėjimo apsauga, 3200W

Trumpai apie prekę

Prekė: Garų lygintuvas su keramine padu, lašėjimo apsauga, 3200W. Kategorija: Lygintuvai.

• Gamintojas: IMPER
• Modelis: Parowe Ceramiczne Anti Drip Anti Calc Mocne
• Galia: 3200 W

✅ STEAM IRON IMPER GLIDRA X – 3200W

➡ IMPER Glidra X is a steam iron created for people who expect strong steam, smooth handling on the fabric and control over each stage of ironing. Maximum power 3200 W, continuous steam 50 g/min and intense impact up to 260 g/min allow you to quickly smooth both everyday clothes and thick, heavily crumpled materials.

➡ The large GlidraCore™ Ceramic ceramic foot, the even distribution of GlideFlow™ 360 steam, the DripGuard™ drip protection system and anti-scaling technologies ensure that the device is designed not only for high efficiency, but also for comfort, durability and quality of long-term use.

✅ 3200 W AND RAPIDHEAT X™ – HIGH POWER, FAST HEATING AND LESS WAITING

➡ RapidHeat X™ technology uses an efficient heating system with a maximum power of 3200 W, thanks to which the iron quickly reaches the operating temperature and is ready for ironing without long waiting.

• fast heating before starting work
• high performance when ironing more clothes
• stable temperature for subsequent journeys
• effective work also with thicker materials

➡ High power is not just a parameter here. It translates into faster readiness, stable operation and more effective use of steam.

✅ GLIDEBURST™ 260 G/MIN – STRONG STEAM IMPACT ON THE MOST DIFFICULT CREASES

➡ When ordinary steam is no longer enough, GlideBurst™ technology generates an intense steam impact of up to 260 g/min, which helps to quickly loosen the heavily creased structure of the material.

• effective smoothing of jeans, flax and thick cotton
• easier ironing of bedding and tablecloths
• less multiple correction of the same place
• steam reaches deeper into multi-layered materials
• visibly faster removal of difficult creases

➡ This function is designed exactly for those moments when you need the maximum steam strength available immediately.

✅ 50 G/MIN CONTINUOUS STEAM – STABLE SMOOTHING DURING EVERY MOVEMENT

➡ During daily ironing, the most important thing is not only the instantaneous power, but also the constant and even steam stream. Glidra X generates up to 50 g/min, thanks to which the fibers of the material are regularly loosened when driving the iron.

• Smoother ironing of shirts and blouses
• faster smoothing of large areas
• less pressing of the iron to the material
• More effective ironing already during the first stint
• More comfortable work with more clothes

➡ Stable steam makes the iron work together with hand movement, instead of requiring constant correction of the material.

✅ GLIDRACORE™ CERAMIC – SMOOTH GLIDE AND EVEN HEAT DISTRIBUTION

➡ The large 25,5 × 13 cm foot uses the GlidraCore™ Ceramic ceramic surface, designed for smooth handling of fabrics and even temperature transfer.

• less friction when moving over the material
• even heat distribution over the entire surface of the foot
• greater comfort with long ironing
• easier handling on different types of fabrics
• high surface resistance during normal use

➡ A well-designed foot means less hand effort and more natural, smooth ironing.

✅ GLIDEFLOW™ 360 – STEAM DISTRIBUTED THROUGHOUT THE FOOT

➡ The GlideFlow™ 360 system uses properly spaced channels and steam holes, so that steam is not concentrated only in one place, but is distributed throughout the entire work surface.

• more even steam action
• faster loosening of material fibres
• more efficient ironing of larger areas
• less dry zones on the foot
• better use of generated steam

➡ Thanks to this, every movement of the iron uses full foot surface and available steam stream.

✅ SafeGuard™ Auto-Off – automatic safety

➡ SafeGuard™ Auto-Off technology automatically turns off heating when the Glidra X iron is motionless. It protects against unnecessary heating of the device and increases safety during daily ironing.

• 30 seconds in horizontal position – automatic heating shutdown
• 8 minutes in vertical position – automatic heating shutdown
• 6 sound signals informing about the activation of the security
• automatic resumption of heating after re-moving the iron
• greater safety when you forget to turn off the device

➡ After lifting or moving the iron, the Glidra X automatically returns to heating, so you can continue ironing right away.

✅ GLIDRATIP™ PRECISION – PRECISE IRONING AT BUTTONS, CUFFS AND COLLARS

➡ The specially shaped GlidraTip™ Precision tip is designed for places where a wide part of the foot cannot work with proper accuracy.

• easier ironing around buttons
• thorough smoothing of collars
• greater precision at the cuffs
• more comfortable ironing of pleats and narrow fragments
• Better control over clothing details

➡ It is in such places that the difference between ordinary ironing and exactly finished clothes can be seen the most.

✅ GLIDESTEAM™ VERTICAL – VERTICAL PRESSING WITHOUT UNFOLDING THE BOARD

➡ GlideSteam™ Vertical technology allows you to use steam also in an upright position, so you can quickly refresh your clothes directly on the hanger.

• ideal for marines, dresses and shirts
• convenient refreshment of curtains and curtains
• Possibility to correct clothes just before leaving
• less need to unfold the board
• rapid smoothing of light creases

➡ This is a practical feature for situations where you need a fast effect without full ironing.

✅ HEATCONTROL X™ + GLIDESTEAM™ SMART – TEMPERATURE AND STEAM UNDER FULL CONTROL

➡ HeatControl X™ is responsible for maintaining the selected temperature, while GlideSteam™ Smart helps to adjust the amount of steam emitted to the device setting.

• greater control with delicate materials
• More stable ironing conditions
• better use of steam
• lower risk of using too much moisture
• the ability to adjust the work to the type of fabric

➡ Instead of always working with one setting, you can adjust the temperature and steam to a specific material.

✅ DRIPGUARD™ – PROTECTION AGAINST WET STAINS

➡ The DripGuard™ system reduces water flow from the foot when working at lower temperatures, helping to protect pressed clothes from unsightly wet marks.

• less accidental dripping
• greater comfort with delicate materials
• cleaner ironing of light clothes
• lower risk of having to dry the fabric again
• More stable operation of the steam system

➡ This solution is especially useful when you often change the temperature between different types of materials.

✅ GLIDRACLEAN™ AND SCALEGUARD™ – CLEANER STEAM SYSTEM AND LONGER SERVICE LIFE

➡ Stone and mineral deposits are among the biggest opponents of steam irons. Therefore, Glidra X uses two solutions to support the maintenance of the system in good condition.

GlidraClean™ supports the removal of deposits and impurities through the self-cleaning function, and ScaleGuard™ reduces limescale build-up inside the steam system.

• longer maintenance of high steam output
• reduction of limescale build-up
• easier maintenance of the device
• protection of steam system components
• Increased durability with regular use

➡ These are technologies created to make the iron not only work well at the beginning, but maintain its parameters for a long time.

✅ 350 ML TANK AND 205 CM CABLE – MORE FREEDOM WHEN IRONING

➡ The spacious 350 ml tank reduces the frequency of water addition, and the long 205 cm cable provides greater freedom to position the board and guide the device.

• longer steam operation without constantly refilling the tank
• convenient ironing of more clothes
• greater range of motion
• fewer restrictions on the location of the outlet
• comfort during daily use

➡ These are simple solutions that make a very big difference in the convenience of work during several dozen minutes of ironing.

✅ TECHNICAL SPECIFICATION

• Brand: IMPER
• Model: Glidra X
• Type: steam iron
• Rated Power: 2800 W
• Maximum power: 3200 W
• Steam generation: 50 g/min
• Steam boost: 260 g/min
• Water tank capacity: 350 ml
• Foot: ceramic
• Foot dimensions: 25,5 × 13 cm
• Dimensions: 31 × 13 × 15,5 cm
• Cable length: 205 cm
• Temperature control
• Adjusting the amount of steam
• Dry ironing
• Ironing with steam
• Vertical ironing
• Strong steam strike
• Sprayer
• Self Clean Function
• Anti-Drip System
• Power supply: 220 – 240 V~, 50/60 Hz

✅ AFTER-SALES CARE – Your purchase is protected!

➡ By deciding to purchase this offer, you gain full support at every stage of using your product. With our after-sales care, you are confident about your purchase.

What does this mean for you?

• Security: You can be sure that every purchase is carefully monitored and secured. In case of a problem, we respond quickly and help, from minor defects to more serious failures.
• Satisfaction: With us you are never alone – every situation is solved comprehensively, which allows you to enjoy long-term reliability of the product.

❇ By choosing us, you gain a partner you can count on at every stage – from purchase to post-sale support. The satisfaction and safety of our customers is our priority. Reviews clearly show that we care about the quality of service. Customers appreciate our commitment, quick responses and confidence that they will not be left without help if necessary.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	IMPER
Parametry	Dominant color	black
Parametry	Model	Parowe Ceramiczne Anti Drip Anti Calc Mocne
Parametry	Power	3200 W
Parametry	Iron type	steam
Parametry	Foot type	ceramic
Parametry	Temperature control	knob
Parametry	Water tank capacity	350 ml
Parametry	Power cable length	2 m
Parametry	Steam generation	50 g/min
Parametry	Steam power shot	260 g/min
Parametry	Product width	13 cm
Parametry	Product height	15.5 cm
Parametry	Product depth	31 cm
Parametry	Product weight	1 kg
Parametry	Product weight with unit packaging	1.7 kg
Parametry	Manufacturer code	Glidra X I-205
Parametry	EAN (GTIN)	5907348902827
Parametry	Packaging status	original
Parametry	Communications	indicator light,sound signal,ready for use indicator,water level indicator
Parametry	Safety	auto shut-off,drip stop,non-slip base,safety switch,protection against limescale build-up,overheating protection
Parametry	Functions	steam function,vertical steam ejection,vertical ironing,steam flow adjustment,self-cleaning,sprayer,other
Parametry	Included equipment	anti-calcification filter,protective overlay,water pouring container
Parametry	Certificates of conformity	CE,WEEE