Grandininis pjūklas 3/8", 1,1 mm, 56 grandžių, Oregon 90PX056E

Trumpai apie prekę

Prekė: Grandininis pjūklas 3/8", 1,1 mm, 56 grandžių, Oregon 90PX056E. Kategorija: Pjūklai.

• Gamintojas: Oregon
• Modelis: 90PX

Cutting chain for chainsaw 3/8" 1,1 mm 56 links LOWPRO Oregon

Chain with reduced bounce and low vibration, ideal for homeowners and occasional chainsaw users.

• Cutter cells in the shape of a bevelled chisel with a sharp profile with two cutting corners are characterized by low vibration and reduced reflection and provide excellent performance and durability, while requiring less maintenance than chains with rounded profile cutting links.
• Gently inclined recess stops in the cutting cells and high-height connecting links placed between them provide excellent protection against reflection.
• The Vibe-Ban concept used in the construction allowed to reduce the vibration level by at least 25% on the saw handles.
• Lubrilink type connecting cells help to hold the oil where it is needed – that is, on the chain.
• Lubriwell lubrication holes in the guide links of the cutting chain help distribute oil along the entire length of the guide groove
• Chain made to measure

The guide link of the cutting chain is the link that enters and moves in the groove of the guide.

• Although the cutting chain may correspond to the model of your saw, its length depends on the length of the guide.
• In order to choose the right length chain: BE SURE to count the number of guide links or look for special markings on the guide - the number of links is usually marked with a number next to the letters "DL" (English). Drive Links)

This product is compatible with 3/8" graduation (low profile) What is the graduation of the cutting system? A chain pitch is the distance between the axes of the first and third rivets (anywhere in the chain) divided by two. The pitch in the entire cutting system (chain, guide, clutch drum) must be the same.

• For this product - the pitch is 3/8 inch (the distance between three rivets is approx. 19 mm).
• Important! In the case of used cutting chains, this distance may increase due to the wear of the chain and its tensile properties.
• 3/8 inch (low profile) is a common pitch used in small, light chainsaws, combustion or electric.

Increase system life with Lubri-Link™ lubrication

• LubriLinkTM is a chamber in the chain link that behaves in a manner similar to an oil tank.
• A lubricant that would normally be discharged from the chain by centrifugal force is collected and retained in the LubriLinkTM tank.
• The oil is collected so as to freely penetrate the individual parts of the chain when the saw slows down or is stopped.
• Thanks to this additional lubrication, the life of the chain and guide is increased.
• LubriLinkTM strengthens cells by reducing their tendency to bend during operation. In this way, the chain becomes more stable and less prone to premature defects.
• The test results show that the oil remains on the chain and its links even when the chain reaches the end of its intended useful life.

Increase sharpening precision with Witness Mark™

• The lines determining the angle of sharpening are now located on the cutting cell itself
• All Oregon chains feature marks on the top surface of the cutting cell. These marks indicate the optimal sharpening angle and help to sharpen the chain accurately.
• This solution makes it much easier to maintain the right angle during the chain sharpening process.

Reduce vibration by 30% with Vibe-Ban™ technology

• This product belongs to the program, I Care About HealthVibe ban™ is a reduced vibration level of the entire cutting system.
• In the construction of OREGON® chains, an anti-vibration solution called Vibe ban™ was developed and used to reduce the vibration level by at least 30%.
• We removed a small amount of material from the cutting cell foot. This allows the back of these pieces to slide freely over the edge of the guide. This small space between the chain and the guide allows the chain to behave like a shock absorber.
• When the working edge of the cutting cell digs into the wood, it takes place to move slightly rather than temporarily getting stuck between the wood and the edge of the guide.
• A large part of the energy is absorbed by the chain, which is why it never reaches the guide, saw, and most importantly the operator.

Save oil and guide with Lubri-Well™

• LubriwellTM is a hole that is extremely useful throughout the cutting system.
• LubriwellTM holes are placed in the least loaded part of the guide links. They reduce the total weight of the chain, which reduces the load on the engine.
• The biggest advantage of LubriwellTM is the distribution of oil along the entire length of the guide (this is extremely important when the guides have star tips) and keeping the oil in the zone of greatest friction, where the chain and guide grooves meet.
• Thanks to each LubriwellTM hole, we can improve the operation and lubrication process.
• The lubricating agent is held in LubriwellTM holes causing a reduction in friction during start-up - before the saw's lubricating system begins to fully function.

Increase cutting speed by up to 35% with Micro-Lite™

• Micro-Lite™ narrow kerf cutting systems increase cutting efficiency and require less saw power compared to standard cutting systems.
• The Micro-Lite™ chain (narrow kerf) together with the Micro-Lite™ guide meet the current demand for light chainsaws.
• The whole system requires less power compared to standard cutting systems. The Micro-Lite family of cutting chains includes the most efficient cutting blade pattern, which consumes less saw power ultimately resulting in increased cutting speed and efficiency.
• Cutting is faster with less load on the saw motor.
• Increases the efficiency of each saw
• The most efficient cutting blade design

Cutting chains with a "cut chisel" link, have teeth in the shape of a cut chisel with a sharp profile with two cutting corners. They are characterized by low vibration and reduced reflection and provide excellent performance and durability, while requiring less maintenance than chains with rounded profile cutting links.

• The "cut chisel" chains are perfect for both homeowners and occasional chainsaw users.
• Safe cutting - the shape of the cutting tooth reduces the possibility of so-called. reflections.
• It does not require as frequent sharpening as chains such as "full chisel" or "half chisel".
• Used and recommended by occasional chainsaw users.

Technical data:

• Number of cells: 56 pcs.
• Groove width: 1,1 mm
• Division: 3/8" (low profile)
• Lubri-Link Technology: Increase system life with Lubri-Link™ lubrication
• Witness Mark Technology: Increase sharpening precision with Witness Mark™
• Vibe-Ban Technology: Reduce vibration levels by 30% with Vibe-Ban™ technology
• Lubri-Well Technology: Save oil and guide with Lubri-Well™
• Micro-Lite Technology: Increase cutting speed by up to 35% with Micro-Lite™
• Chisel Type: Beveled Chisel

Specifications