Grandininis pjūklas 3/8", 1,3 mm, 55 grandžių, STIHL MS230/MS250/MS251, kietmedžiui

Trumpai apie prekę

Prekė: Grandininis pjūklas 3/8", 1,3 mm, 55 grandžių, STIHL MS230/MS250/MS251, kietmedžiui. Kategorija: Pjūklai.

• Gamintojas: Baribal
• Modelis: B91VXL-055X-13-3/8

Parameters:

• Chain manufacturer: Baribal Poland
• Fits chainsaws with guide: 16" - 40 cm
• Jump | Division: 3/8" [ ~ 19 mm ]
• Cutting tooth type: Full chisel
• Guide tooth width: 1,3 mm | 0.050"
• lubrication: Duo-Oil-System
• Number of guide links: 55 E
• Number of cutting teeth: 27

Features of the Baribal Blue Extreme Cut chain:

• 1. Professional cutting tooth - elongated by 33% from standard. Tooth type Hard Blue Extreme Cut - special carbon steel SAE8660 and chrome coating with increased abrasion resistance.
• 2. Anti-reflection system - no uncontrolled reflection of the guide from the tree
• 3. Very strong rivets and clips protect against excessive tension
• 4. Specially shaped guide links
• 5. Dual oil distribution system throughout the guide
• 6. Suitable chain pitch/split for 3/8" systems

BARIBAL chains are certified as few: UL / REeaCH / RoHs / CE and ISO.

Chain with cutting link type: "Full chisel

Cutting chains with a "full chisel" link have cutting teeth with a full profile account, which allow efficient cutting of even harder soiled wood.

The full chisel chains are perfect for both professionals and occasional chainsaw users. Due to the shape of the cell, they are less likely to dull - they require less frequent sharpening and maintenance.

Fast cutting of hardwood

Does not require as frequent sharpening as "half chisel" chains

Works well on surfaces soiled with sand or soil.

Used and recommended by professionals and less advanced users.

The guide link of the cutting chain is the link that enters and moves in the groove of the guide.

Although the cutting chain may correspond to the model of your saw, its length depends on the length of the guide.

In order to choose the right length chain:

BE SURE to count the number of guide links

or look for special markings on the guide - the number of cells is usually marked with a number next to the letters "DL" (English). Drive Links)

This product is compatible with 3/8" graduation (low profile)

What is the scale of the cutting system?

A chain pitch is the distance between the axes of the first and third rivets (anywhere in the chain) divided by two. The pitch in the entire cutting system (chain, guide, clutch drum) must be the same.

For this product - the pitch is 3/8 inch (the distance between three rivets is approx. 19 mm).

Important! In the case of used cutting chains, this distance may increase due to the wear of the chain and its tensile properties.

3/8 inch (low profile) is a common pitch used in small, light chainsaws, combustion or electric.

Compatible with:

• Alpina: 330, 380, 432, 438, P34
• Bell: PICKPINE 16, PICKPINE 34, PICKPINE 38
• Blitz: B34, B35D, B38, B300, B304, B400, B404, E140F
• Bullcraft: BES1300B, KS400S, KS40S, KSE1300B, KSE30
• Dynamac: 30F, 35F, E140F, DY 17E, DY 36
• Folux: E140F, F130, F140, F2, F3, F30, F35, F4, F41
• Handy: 30HF, 35HF, 41HF, E140F
• Lombard: LITTLE LIGHTNING, PONY
• MTD: GCS 46/40
• McCulloch: AK 03, 474, 484, 735, C180, CALIFORNIA/ARIZONA, CALIFORNIAN, CS390, EAGER BEAVER, MAC 120, MAC 130, MM25, MM30, MM35, PM310, PM320, PM330, PM340, PM360, PM364, PM370, PM470, PM480, PM510, PM6, PM730, POWER MAC 6
• Metabo: KT 1530, S 338
• Nautac: 135, 140, 144, 232, 236
• Ryobi: 35B, CS36C, CS41, CS384CB, CS385CB, CSE3330, HC31, HCS31, HC36, HCS36, HC41, CS1530, CS1535, CS1540, RCS4040CA
• Shark: PL2, PL4
• Steinmax: CS300, CS360
• Stihl: 009, 011, 012, 017, 018, 019 T, 020, 020 T, 021, 023, 025, E 14, E 140, E 160, E 180, MS 170, MS 171, MS 180, MS 181, MS 190 T, MS 192 C, MS 192 T, MS 200, MS 200 T, MS 201, MS 201 T, MS 210, MS 211, MS 230, MS 231, MS 241 C, MS 250, MS 251, MSE 140, MSE 140 C, MSE 160, MSE 160 C, MSE 180, MSE 180 C, MSE 200, MSE 200 C

Specifications