Grandininis pjūklas STIHL MS 400 C-M su HEXA grandine

Trumpai apie prekę

Prekė: Grandininis pjūklas STIHL MS 400 C-M su HEXA grandine. Kategorija: Pjūklai.

• Gamintojas: Stihl
• Modelis: PILARKA SPALINOWA MS 400 C-M STIHL

first chainsaw with magnesium piston

MS 400 C-M is the world’s first chainsaw with magnesium piston, providing excellent weight-to-power ratio and very high revs. The weight of the engine unit is only 5,8 kg, and the weight-to-power ratio is 1,45 kg/kW. Thanks to innovative technology, the saw reaches up to 14.000 rpm. /min, which increases the comfort of work during trimming or clipping. For forestry applications when working with medium-sized wood. The long-life air filter system with HD2 filter guarantees excellent filtration. Easy start-up thanks to one starting position and Stop button, M-Tronic system ensuring constantly optimal engine power. Practical tank stoppers allow them to be easily and safely filled.

• Technical data: Value
• Power kW/hp: 4/5,4
• Capacity cm³: 66,8
• Length of guide cm: 40
• Weight kg 1): 5,8
• Weight of set kg 2): 6,97
• Weight/power ratio kg/kW: 1,4
• Chainsaw pitch: 3/8"
• Vibration value left/right side m/s² 3): 3,5/3,5
• Acoustic power level dB(A) 4): 118
• Sound pressure level dB(A) 4): 107

STIHL M-Tronic (FT)

The electronic engine control system precisely regulates the ignition time in each speed range and dispenses the right amount of fuel depending on temperature, altitude and fuel quality. Thanks to this, only one position on the switch is enough to start the saw.

Magnesium pistons

Very light magnesium pistons provide excellent weight-to-power ratio and increased strength and high revs.

Decompression valve

The decompression valve allows you to remove part of the compressed mixture from the cylinder during start-up. This allows you to significantly reduce the force needed to pull the starter cable, relieve the person operating the device and protect the entire start-up system of the device.

Long-life air filter system

The long-life air filter system significantly extends the operating periods between filter cleanings. Larger and heavier particles are ejected by centrifugal force outside, and then by the rising ramp additionally ejected upwards. Pre-cleaned air is fed into the air filter.

Combination lever

The M-Tronic system recognizes the hot and cold start phase, so there is only a starting position on the station wagon lever. M-tronic dispenses exactly the amount of fuel that is needed at the moment. The great advantage of this technical innovation is the fact that the user can immediately start working and at the highest speed. Thanks to optimal acceleration, after a few seconds the chainsaw is completely ready for operation.

STIHL 2-MIX engine

The two-stroke STIHL engine in 2-MIX technology provides high power, and at the same time fuel savings of up to 20% compared to two-stroke STIHL engines of similar power without 2-MIX technology. Exhaust emissions are down by approx. 50%.

Nut with protection against loss

When replacing the cutting set, a practical drive wheel cover nut with protection against loss was used.

Oil pump with adjustable capacity

Allows for accurate, suitable lubrication. The E-designation guarantees that the right amount of oil is delivered in all operating conditions. Professionals dose accurately. The pump reduces oil consumption by up to 50%.

Side chainsaw tensioner

The tensioner screw is rotated by a special knob passing through the cover of the chainsaw drive wheel. This avoids hand contact with the sharp chainsaw and sharp teeth of the resistance bumper.

STIHL Ematic System

The STIHL Ematic system consists of an Ematic guide, an Oilomatic chainsaw and an oil pump with adjustable performance. reduction of the amount of pressed oil. The special design of the guide and chainsaw ensures that every drop of oil reaches exactly where the chainsaw is needed most. This reduces the consumption of chainsaw lubricating oil by up to 50%

Four-channel STIHL technique

In four through channels, the fuel-air mixture is swirled before ignition. This ensures better fuel combustion and significantly increases engine efficiency. The result: lower fuel consumption and high torque in a wide range of revolutions.

STIHL ElastoStart

The compression pressure causes reflections to be created when starting internal combustion engines, burdening the muscles and joints of the operator. The cushioning element placed in the special starter holder absorbs and transmits the existing forces according to the course of the compression cycle, thus enabling smooth start-up of the device without .

Carburetor preheating system

STIHL chainsaws equipped with a carburetor preheating system are reliable even when it is cold outside: in winter mode, heated air flows around the carburetor. This solution effectively prevents icing of the carburetor

HD2 filter

The new HD2 filter is made of polyethylene and has up to 70% finer pores compared to fliss or polyamide filters, which in practice means filtering the smallest particles of impurities. The new filter is also waterproof, does not absorb oil and can be easily cleaned. Round filter cartridge can be disassembled without tools

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Stihl
Parametry	Power supply	combustion
Parametry	Guide length	40 cm
Parametry	Manufacturer code	PILARKA SPALINOWA MS 400 C-M STIHL
Parametry	Batteries included	no