Grandininis pjūklo grandinėlė OREGON, 3/8", 1,3 mm, 52 nareliai

Trumpai apie prekę

Prekė: Grandininis pjūklo grandinėlė OREGON, 3/8", 1,3 mm, 52 nareliai. Kategorija: Grandinės.

• Gamintojas: Oregon
• Modelis: 91VXL052E

Brand: Oregon

Catalog number: 91VXL

✅ By choosing our auction, you can be sure that you are buying the original product! ✅

• Chain series — VersaCut
• Number of cells — 52 pcs.
• Groove width — 1,3 mm
• Division — 3/8" (low profile)
• Chisel type — plong

✔ For professional operators of chainsaws dealing with surgery and tree trimming.

✔ Recommended by Arborists for Arborists.

✔ Improved sharpening geometry gives better results and increased cutting efficiency.

✔ Gently inclined depth limiters in cutting cells reduce reflection.

✔ Lubrilink™ type connecting cells help to hold the oil where it is needed

✔ Lubriwell™ lubrication holes in all guide links of the cutting chain help distribute the oil along the entire length of the guide groove.

✔ Ideally suited for professional low power chainsaws.

✔ Light chain with reduced bounce.

✔ Lifespan longer by 33% than traditional chain.

Check if you have the right numbers stamped on your old chain, symbolizing the type of chain. They can be seen at the bottom of the cutting chain - on the so-called. the guide link, i.e. the one that enters the guide groove. If the number stamped is "91", then its parameters mean: graduation 3/8 inches and the thickness of the guide cell 1,3 mm.

► The guide link of the cutting chain is the link that enters and moves in the groove of the guide.

❗ Although the cutting chain may correspond to the model of your saw, its length depends on the length of the guide. ❗

► In order to choose the right length chain:

BE SURE to count the number of guide links or look for special markings on the guide - the number of cells is usually marked with a number next to the letters "DL" (English). Drive Links).

❗ This product complies with the scale 3/8" (low profile) ❗

A chain pitch is the distance between the axes of the first and third rivets (anywhere in the chain) divided by two. The pitch in the entire cutting system (chain, guide, clutch drum) must be the same.

For this product - the pitch is 3/8 inches (the distance between three rivets is approx. 19 mm).

Important! In the case of used cutting chains, this distance may increase due to the wear of the chain and its tensile properties.

3/8 inch (low profile) is a common pitch used in small, light chainsaws, combustion or electric saws.

• Husqvarna: 36, 136, 41, 137, 141, 142, 338XPT, T425, 23, E16, E316, E317, E321, 33, 335XPT, 333, 334, 1600, 338, 1400, 315, 316, 318, 243, 320, 321, 16, 135, 120MarkII, 120i, 135MarkII,
• Oleo-Mac: GS35, GS350, GS370, 931, 932,
• Solo: 613, 614, 630, 633, 635, 636, 637, 640, 642,
• Makita: DCS230T, DCS232T, DCS3410TH, DCS3501, DCS4610, DCS300, DCS330, DCS300S, DCS340, DCS34, DCS341, DCS3500, DCS350, DCS3520A, DCS380, DCS390, DCS400, DCS401, DCS 330S, UC3501, UC3520A, BUC250RDE, BUC122RFE, UC3030A, UC3530AK, UC3000, UC3500, UC4000, UC4030AK, 5012, 5016,
• Jonsered: 2033TH, 2118EL, 2115EL, 2035, 2116, 2115, 2135, 2121, 2117, 2137, 2138, 2139,
• Dolmar: PS330, PS33, PS3300TH, PS34, PS340, PS341, PS344, PS3410, PS350, PS390, PS400, PS401, PS41, PS45, ES3, ES6, ES30, ES37, ES40, ES41, ES140, ES151, ES152, ES152A, ES153, ES160, ES161, ES162, ES162A, ES163, ES172, ES172A, ES173, ES183, ES2035, ES2040, 100, 101, 102, 103, 104, 105, 106, 108, 275, 285, PS330TH, CS2040,
• Partner: 360, 330, 335, 340, 345, 350, 351, 370, 385, P390, 395, P420, 391, P842,
• Zenoah: G2500T, GZ3300, GZ3200T, G3200T, GZ3500T, G3800, G3800AVS, G2500PS, G2000T, GT250, GT310, G300T, G310TS, G320AVS, G250TS, G3100, G3200, G3300, G3800AV, G3800AV, G3800AV
• Homelite: HCS3335, HCS4041CA, 20AV, 23AV, 27, 3300, 3350, 3550, 3800, 3335, 4500, 4550, PS33, RANGER, CS40, TIMBERMAN, UT10901, UT10926, UT10974,
• Alpina: ELECTRIC, E120, E130, ES182, ES202, E150, KS1400B, KS1500B, A10E, A14E, 352, 382,
• Echo: CS2600ES, CS260TES, CS2700ES, CS3500ES, CS350WES, CS351WES,
• FloraBest: FHE550A1, FKS2000, FKS2200,
• McCulloch: MS1215, MS1415, MS1425, MS1435, MS1630, MS1640, MS1645, MS1845J, MS1834N, MS1635AV,
• Ryobi: PCN3335, APR02,
• Shindaiwa: 285S, 300S, 305S, 350, 352S, 360, 357,

OREGON® is an American company that is a world leader in the production of cutting systems and accessories for forestry and gardening equipment of all brands available on the market.

Specifications