Grindų šildymo termostatas su WiFi, 230V, išmaniems namams

Trumpai apie prekę

Prekė: Grindų šildymo termostatas su WiFi, 230V, išmaniems namams. Kategorija: Jutikliai.

• Gamintojas: Zamel
• Modelis: GKW-02 CZARNY

Wi-Fi temperature controller for underfloor heating, heating systems and valves

ZAMEL GKW-02 BLACK

✔ Modern temperature controller designed to control heating strips, valves and other heating devices (e.g. heating mats – by an additional contactor)

✔ Three illuminated touch fields – are used both for local temperature control and can run programmed actions in the SUPLA system (e.g. turning on the heating scene, turning off the light)

✔ Voltage relay output 5 A / 250 V AC, ideal for connecting valves and other low-current heating elements

✔ Compact, aesthetic housing with a thickness of only 13 mm – ideal for wall mounting

✔ The ability to program weekly schedules and quickly change the temperature thanks to manual and time mode

✔ Fully remote control and configuration via SUPLA application – ideal for modern installations

The set includes:

• 1 pc. Temperature regulator GKW-02 BLACK

• 1 pc. Mounting plate with pressboard

• Short instruction manual

The phone behind the graphics is not part of the offer - not included.

➡ Housing available in colours: black and white. The offer is for a regulator in black

➡ Power supply: 230 V AC, 50/60 Hz

➡ Installation: wall-mounted – ultra-thin housing, only 13 mm thick

➡ The hole spacing in the metal mounting plate fits a standard flush-mounted box Ø 60 mm – it is possible to quickly install in place of a previously used classic switch or thermostat

➡ Communication: Wi-Fi 2.4 GHz b/g/n, Wi-Fi coverage

➡ LED signal (green – communication, red – heating, blue – cooling)

➡ Modern, refreshed version of the GKW-01 model – lighter, thinner and fully managed by the largest smart in Poland - SUPLA

Technical data:

• Power supply voltage: 230 V AC

• Frequency: 50 / 60 Hz

• Power consumption: 1 W

• Temperature measurement: NTC internal probe

• Temperature control range: 5 ÷ 40°C

• Measuring accuracy: ±0.5°C

• Support: 3 x touch “action trigger” fields and the Supla application

• Relay output: voltage NO, 5 A / 250 V AC

• Working modes: manual, weekly schedule, timer, OFF

• Transmission: Wi-Fi 2.4 GHz b/g/n

• Assembly: surface mounted

• Housing protection: IP20

• State signal: LEDs (green, red, blue)

• Dimensions: 90 x 90 x 13 mm

How is GKW-02 different from GKW-01?

Not sure which model to choose? Check out the key differences:

✔ Assembly:

• GKW-01: wall mounting (can Ø 60 mm)

• GKW-02: wall mount – ideal where there is no can or aesthetics count

✔ Relay output type:

• GKW-01: voltage-free 16 A – suitable for heaters, heating cables, etc.

• GKW-02: voltage 5 A – ideal for controlling valves, heating strips

✔ Temperature control:

• GKW-01: you can set the temperature directly on the panel or through the application

• GKW-02: setting only by SUPLA application for greater control and automation

✔ Measurement of humidity:

• GKW-01: yes – it has a built-in humidity sensor

• GKW-02: no – only temperature measurement

✔ Clock power:

• GKW-01: has a built-in battery to support the clock

• GKW-02: no batteries

✔ Physical service:

• GKW-01: 5 touch buttons

• GKW-02: 3 touch fields with the possibility of programming them as “actions” – e.g. to enable smart home scenes

✔ Dimensions:

• GKW-01: 90 x 90 x 45 mm

• GKW-02: ultraplasques – only 13 mm deep

Summary:

• Choose GKW-01 if you want full offline functionality, humidity measurement, local control and cooperation with heaters.

• Choose GKW-02 if you are looking for a flat and aesthetic solution for valve control and completely remote management via SUPLA application.

Assembly

1. Screw the mounting plate to the wall or junction box (standard Ø 60 mm)

2. Unscrew the front panel of the device (use a screwdriver or screwdriver)

3. Run the power cords through the back of the housing (using the built-in choke)

4. Connect the wires according to the scheme:

• L – power supply (phase)
• N – neutral cable
• L’ – control output (for valve or strip)

5. Screw the device back on and mount on a pre-screwed plate

SUPLA - Your Smart Home

SUPLA is an open and free smart home system that allows you to control heating, lighting, blinds, gates and even household appliances – from anywhere in the world, using the application on your smartphone.

You do not have to buy an expensive kit or plan installation at the construction stage.SUPLA works simply, stably and develops together with you and your needs.

✔ Remote control of devices

✔ Creating schedules and scenes

✔ Notifications and automations

✔ Simple and intuitive application operation

Start using today – all you need is a free SUPLA app.

📱 Remote control via SUPLA application

The graphic shows the SUPLA application screen, where two GKW-02 thermostats in white and black assigned to the room "Living room" are visible.

With the app, you can:

• control the current and set temperature in real time,

• manage several devices at the same time,

• quickly change operating modes and temperature from the phone,

• create groups and scenes

Simple, convenient and from anywhere in the world.

Specifications