IR WiFi nuotolinio valdymo pultas ESP8266, oro kondicionieriui ir televizoriui, suderinamas su Home Assistant, MQTT, ESPHome

Trumpai apie prekę

Prekė: IR WiFi nuotolinio valdymo pultas ESP8266, oro kondicionieriui ir televizoriui, suderinamas su Home Assistant, MQTT, ESPHome. Kategorija: Išoriniai moduliai.

• Gamintojas: SMLIGHT
• Modelis: SLWF-12

Control your air conditioning, TV and other IR devices over Wi-Fi.

Integration with Home Assistant, MQTT and Telegram

📡Wi-Fi 2.4 GHz 802.11 b/g/n - works with 2.4GHz WiFi router

🔴IR TX + RX - broadcasting and reception and learning codes

🏠 Home Assistant - ESPHome · MQTT - Automation

🔌USB socket - programming without an external programmer

What is SLWF-12?

SLWF-12 is a compact, open Wi-Fi board on ESP8266 processor with built-in transmitter and infrared (IR) receiver. With it, you can control any IR-enabled device — no need to replace hardware, no manufacturer’s cloud, no subscription required.

The device installed once (connected to the USB port) becomes a bridge between your remote control and smart home - it works locally, privately, 24/7.

What can you control?

• Air conditioners - any air conditioner with IR remote control
• TVs - Samsung, LG, Sony, Panasonic and others
• Soundbars and receivers - volume and mode control
• Fans - speed, oscillation, timer
• Designers - home and office projectors
• Each IR device - Record the signal with the remote control and play back in HA

💡 Don't have IR codes? Point the original remote at the module and press the button - SLWF-12 will record the signal and play it on command. Works even with custom remotes.

Compatible with air conditioners — 38 manufacturers

Firmware AC Bridge (optional, free) supports the protocols of 38 air conditioner manufacturers from the IRremoteESP8266 library:

Daikin, Mitsubishi, Mitsubishi, Heavy, LG, Samsung, Panasonic, Fujitsu, Toshiba, Hitachi, Haier, Gree, Midea, Sharp, Whirlpool, Bosch, Sanyo, TCL, Kelvindator, Argo, Neoclima, De'Longhi, Voltas, Goodweather, Kelon, Airton, Airwell, Amcor, Coolix, Corbel

Is your manufacturer not here? Use the learning function from the remote control - SLWF-12 will record any IR signal, regardless of the protocol.

Integration with Smart Home Systems

🏠 Home Assistant

Integration by ESPHome (remote_receiver + remote_transmitter) or by MQTT discovery as climate entity. Control from dashboard, automation, scenarios, scripts.

📨 MQTT

Communication by MQTT broker. Compatible with Node-RED, ioBroker, openHAB and any system that supports MQTT.

✈ Telegram Bot

Control the air conditioner with messages on Telegram - turn on, turn off, change the temperature, mode - without a home automation server.

🌐 WEB UI

Built-in website available locally on the web. Control without applications, without the cloud - just a browser. Supports light and dark modes.

How to Start – 3 Steps

1. Connect via USB - any USB port (power supply, TV, computer). You do not need an external programmer - the CH340N converter is built-in.
2. Upload firmware - install AC Bridge (for air conditioning) or your own ESPHome firmware. Flashing via USB - no soldering iron, no programmer.
3. Connect to Wi-Fi and control - the first time you start, the module creates a "SLWF-12 setup" network. Go to the portal, select your home network and set up the integration.

❄ AC Bridge Firmware - specifically for air conditioners

The optional free AC Bridge firmware turns SLWF-12 into a dedicated Wi-Fi bridge for your air conditioner:

✅62 variants of protocols of air conditioners (IRremoteESP8266 v2.9 library)

✅Sync with original remote — change on remote updates status in HA and Telegram

✅Schedules and scenes — morning warming, evening cooling

✅MQTT discovery — automatic configuration in Home Assistant as climate entity

✅Telegram Bot — control in pocket, without HA application

✅Sunrise/sunset calculated locally on the device (latitude)

✅Offline — local control via Wi-Fi even without internet

✅OTA Updates — firmware update wirelessly (Web UI, URL)

Technical parameters

• Processor: ESP8266 · ESP-12F module
• Wi-Fi: 2.4 GHz · 802.11 b/g/n
• Infrared (IR): Transmitter + receiver on one board
• USB/UART converter: CH340N (programming directly from USB)
• Power supply: USB / 5 V
• Logic voltage: 3.3 V
• Outputs (GPIO): GPIO · ADC · UART TX/RX · Reset · 3.3V · 5V · GND
• Compatible firmware: ESPHome · AC Bridge · own ESP8266 firmware
• Integrations: Home Assistant · MQTT · Telegram · REST API · UART

Please refer to the instruction manual, which you can download in this listing, under the description.

Who is SLWF-12 for?

🏡Home Assistant users

Do you want to control your air conditioner or TV from HA? SLWF-12 with ESPHome integrates in minutes.

❄ Air conditioner owners

Do you have air conditioning without Wi-Fi? Firmware AC Bridge gives you full control without replacing the unit.

🔧Hobbyists and Makers (DIY)

Open GPIO and UART enable expansion with sensors, buttons and external modules.

🔒Privacy supporters

Control 100% local, no cloud and subscription. The data does not leave your network.

Specifications