Judesio jutiklis su apšvietimo radarų, 230V, 120° kampas, ZigBee, TUYA OXT, ZigBee2MQTT

Trumpai apie prekę

Prekė: Judesio jutiklis su apšvietimo radarų, 230V, 120° kampas, ZigBee, TUYA OXT, ZigBee2MQTT. Kategorija: Jutikliai.

• Gamintojas: Tuya
• Modelis: ZY-M100-2Z

The sensor has a Doppler radar, which works on the principle of active testing of the environment in terms of presence. From now on, the light will never go out while taking a shower again! You can sit still, and the sensor will know about your presence anyway! Also, create automations for brightness with the built-in brightness sensor.

Attention! For proper operation, a ZigBee 3.0 gateway is required, available in our offer.

The sensor also works perfectly on the Home Assistant ZigBee2MQTT!

The main advantages:

• Doppler radar-based real presence sensor detecting minimum movement, e.g. breathing so you can sit still and the sensor will detect that you are indoors anyway!
• Control lighting through automation in the app
• The sensor has two detection zones, Close detection (micromovement detection range), Long detection (distance range of operation and penetration of obstacles such as glass or doors)
• Adjust the brightness of the lighting depending on the light intensity sensor in the device
• Advanced automation based on brightness and detection status (close, far)

• Possibility of wide settings options:
• motion detection sensitivity (0- 9)

- detection state shutdown delay time (10 s – 1500 s)

- delay time when motion is detected (0 s – 10 s)

- minimum detection distance (0 m – 9,5 m)

- maximum detection distance (0 m – 9,5 m)

• The device detects movement through the windows, so the light will not go out if you are in the shower cabin
• The device has a presence detection history
• In-app historical brightness chart available
• Ability to set schedules with other device settings with day and time data
• Perfect performance with Home Assistant ZigBee2MQTT!

Attention!

After installing the device at the destination, it must be properly configured in the application. Incorrect configuration may cause incorrect operation. The settings depend on where the sensor is installed.

Optionally, the minimum and maximum detection distances for the target alarm zone from 0.1 m to 9.5 m can be selected.

What distinguishes ZigBee from classic WiFi is a sufficiently long working time of battery-powered devices (unattainable with the classic WiFi protocol) and signal transmission through accessories powered by 230V.

In addition, selected ZigBee devices (230V mains powered) become part of the Mesh network. This means that if a module is unable to connect directly to the ZigBee gateway, it communicates with it through another closest accessory of this system. The repater in the ZigBee ecosystem are devices powered by 230V, such as OXT Zigbee relay, Sonoff ZBMINI, 230V sockets or bulbs.

Thanks to this, you can create an extensive network that can operate over much longer distances than classic WiFi.

Specification:

• Communication protocol: ZigBee 3.0
• Power supply: AC 230 V
• Detection angle: 120° (ceiling mounted)
• Detection distance: 0-9,5 m
• Light intensity measurement range: 0 - 2000 lux
• Working frequency: 5800 MHz
• Degree of protection: IP20
• Dimensions: 39 mm x 61 mm x 61 mm
• Works with: Home Assistant, Zigbee2MQTT (Z2M)

Included:

• OXT Radar presence and brightness sensor 230 V ZigBee
• Fixing in suspended ceiling

PRODUCT CODE: T160

Specifications