Piegādes termiņš visā Lietuvā: 5-7 darba dienas.
Piegādes cena uz norādīto adresi: 3 eiro
Apraksts
Trumpai apie prekę
Prekė: Kalėdinė elnio dekoracija, 201–300 lempučių, 3,6 W. Kategorija: Kalėdinės girliandos.
- Gamintojas: no brand
- Modelis: BT-LED4.5V-240CL-B
- Galia: 3.6 W
240 LED LIGHT REINDEER — DECORATION THAT CAN BE SEEN FROM THE STREET
This is not a flat dictate silhouette or an inflatable figure. The reindeer is spacious, wrapped in thin wire in a dense braid, and 240 LEDs are woven into this braid. After dark, the light comes out of the whole body at once and the animal looks as if it is shining from the inside.
Placed on the lawn, at the entrance or under the Christmas tree on the terrace, it does the job from the first evening. Neighbors can see it from the sidewalk, and from the window it looks like a warm stain in the garden.
SILHOUETTE — reindeer in a grazing position, with his head bowed, as if plucking grass. This one looks more natural than the rigid condition and looks good in combination with the second figure or with the lights on the bush.
240 LED — warm gold, evenly distributed throughout the body, legs, neck and head. It is not a cord wrapped around, but lamps woven into the structure.
24 LIGHTING MODES — from calm constant light, through slow dimming, to flashing and flickering effect. The mode is selected by a button on the cable.
DIMENSIONS — about 66 cm long, 46 cm high and 17 cm wide. It's the size of a big dog, not a window sill ornament.
POWER SUPPLY — 220 – 240 V power supply with 4,5 V output, 3,6 W power consumption. No batteries to replace in the middle of the season; with all-night illumination throughout December, the cost of electricity is literally a few zlotys.
PROTECTION RATING IP44 — resistant to rain and snow. You can leave it outside all winter.
INSIDE AND OUTSIDE — looks just as good in the living room next to the Christmas tree as it does on the lawn.
OF WHICH IT IS MADE
CONSTRUCTION — a skeleton of bent steel wire, on it a dense braid of thinner wire in warm bronze color. The whole is rigid, holds its shape and does not fold under the weight of snow.
FINISH — The braid has an irregular, hand-looking weave.
DIODES — sunk in a braid, in transparent casings, practically invisible in daylight.
INCLUDED — reindeer, AC adapter with cable and pins to drive into the ground so that the figure does not fall over in the wind.
MATERIALS — steel, copper, polyethylene and polystyrene. The design is lightweight; one person easily moves it around the garden.
WHERE TO PUT IT TO MAKE IT LOOK ITS BEST
ON THE LAWN AT THE DRIVEWAY — the most common and effective setting. A reindeer with its head tilted sideways to the street reads immediately, even from a distance.
AT THE ENTRANCE — next to the door or stairs, together with the garland on the railing. Warm gold lights match spruce twigs and red bows.
ON THE TERRACE OR BALCONY — does not need grass, just an even surface and an outlet nearby.
AT HOME — at the Christmas tree or in the corner of the living room as a mood light. Set to constant light mode, it shines soft enough that you can watch a movie with it.
IN A PAIR — two reindeer, one grazing and one standing, look like a flock. This is the most commonly repeated arrangement in gardens.
HOW TO START IT — THE WHOLE INSTRUCTION IN FIVE STEPS
1. Take the reindeer out of the box and spread your legs at the destination.
2. If it stands on grass or ground, drive the included pins through the bases of the legs — it’s wind protection.
3. Connect the cable from the figure to the power supply, and the power supply to the outlet. Outdoors, use a garden socket or a flap extender.
4. With the button on the cable, switch the lighting mode. Subsequent presses pass through all 24 variants – from constant light to flickering.
5. Position the figure so that the wire does not lie across the path. With a longer distance, the external extension cord does the trick.
The whole activity takes less than five minutes and does not require any tools.
IP44 — the design is splash and precipitation resistant, but keep the power supply itself under a roof or in a flap socket. Do not immerse any part in water and do not set the figure in a puddle.
BULBS ARE NOT REPLACEABLE — LEDs are permanently embedded in the braid. Don't unscrew the structure.
DO NOT CONNECT TO ELECTRICITY AS LONG AS THE FIGURE IS IN THE PACKAGE — the coiled wire under the film heats up tighter.
AFTER THE SEASON — disconnect the power supply, wipe the braid with a dry cloth and hide the reindeer in the original box. The wire construction will last for many seasons if it does not lie under heavy things.
CHILDREN AND ANIMALS — the figure is not a toy. Lead the cord so that it does not tempt the cat or dog.
The wire construction is light but sensitive to crushing, so the package is stiffened.
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With a VAT invoice |
| Parametry | Brand | no brand |
| Parametry | Number of lights | 201 - 300 |
| Parametry | Illumination type | reindeer |
| Parametry | Power | 3.6 W |
| Parametry | Product height | 46 cm |
| Parametry | Product width | 66 cm |
| Parametry | Additional features | 3d shape |
| Parametry | Manufacturer code | BT-LED4.5V-240CL-B |