Kampinis šlifuoklis be laidų, 125 mm, 2x4 Ah, 21 V

Trumpai apie prekę

Prekė: Kampinis šlifuoklis be laidų, 125 mm, 2x4 Ah, 21 V. Kategorija: Kampiniai šlifuokliai.

• Gamintojas: Geko
• Modelis: G80680
• Įtampa: 21 V

➡ Brushless Cordless Angle Grinder 125mm 950W 2x4.0Ah 21V

⭐ G80680 ⭐

• ✅ 2 x 4Ah BATTERY ⭐
• ✅ FAST CHARGER ⭐
• ✅ SUITCASE ⭐

⭐ Best choice ⭐

➡ Power, mobility and full control over every cut ⭐

✅ The battery angle grinder has been designed for intensive work in the workshop, on the construction site and during renovations.

➡ Powerful 950W brushless motor, 21V power supply and two 4.0 Ah batteries ensure high performance and full freedom of operation without power cord restrictions.

✅ The device works with discs with a diameter of 125 mm and is equipped with a 3-stage speed control (3000 / 5000 / 8000 rpm. /min), slow start function, switch with continuous operation lock, standard spindle M14, electronic control panel with LEDs and an additional handle mounted on both sides.

➡ Such equipment allows you to conveniently match the parameters of work to the material being processed and maintain full control during cutting, grinding and surface cleaning.

➡ TECHNICAL DATA:

• ⚙ Power supply voltage: 21 V ⭐
• ⚙ Battery capacity: 2 × 4.0 Ah ⭐
• ⚙ Battery type: Lithium-ion ⭐
• ⚙ Engine type: Brushless ⭐
• ⚙ Rated power: 950 W ⭐
• ⚙ Diameter of the disc: 125 mm ⭐
• ⚙ Rotary speed: 3000 / 5000 / 8000 rpm /min ⭐
• ⚙ Speed control: 3-degree ⭐
• ⚙ Slow start function: Yes ⭐
• ⚙ Spindle size: M14 ⭐
• ⚙ Side handle: Assembly in 2 positions ⭐
• ⚙ Control panel: Yes ⭐
• ⚙ Selected gear indicator: Yes ⭐
• ⚙ Charge level indicator: Yes ⭐

➡ 950W brushless motor – greater efficiency and longer service life

✅ The brushless motor eliminates the elements most exposed to wear, thanks to which the device works more efficiently, achieves higher energy efficiency and does not require brush replacement.

➡ This means stable power both when cutting steel and grinding concrete, stone or structural elements.

✅ Additionally, the lower temperature of work translates into greater durability of the entire drive and better use of energy stored in batteries.

➡ Two 4.0 Ah batteries – virtually no downtime

✅ The set includes 2 powerful 21V lithium-ion batteries with a capacity of 4.0 Ah, so that one can power the device and the other can remain in the charger.

⭐ This solution allows you to maintain continuity of work during renovations, assembly of steel structures, roofing or workshop works, without having to wait long for recharging.

➡ Switch with continuous operation lock

⭐ The grinder is equipped with an ergonomic switch with the possibility of blocking continuous operation, so there is no need to constantly hold the button during longer work.

✅ This solution significantly increases convenience when cutting more elements, grinding long surfaces or removing rust.

⭐ The hand remains less loaded, and driving the device is more natural and comfortable, especially during long minutes of work.

➡ Battery charge indicator

⭐ Each battery is equipped with with its own set of LEDs informing about the energy level.

✅ This allows you to check the available energy supply before starting work and avoid unexpected discharge when performing demanding tasks.

➡️ LED Control Panel – All Information at Your Fingertips

⭐ The electronic panel on the housing allows for quick control of the device's most important parameters.

✅ The following are displayed:

• selected operating gear
• charge level of the installed battery

✅ This means there's no need to interrupt your work to check settings or power status.

⭐ 3-stage speed control

The ability to choose one of three speeds allows you to choose the right rotation for the job.

➡ 3000 rpm /min

• ✅ accurate grinding ⭐
• ✅ processing of more delicate materials ⭐
• ✅finishing works ⭐

➡ 5000 rpm /min

• ✅ universal use ⭐
• ✅ surface preparation ⭐
• ✅ removal of rust and paint ⭐

➡ 8000 rpm /min

• ✅ fast cutting of steel ⭐
• ✅ constructive work ⭐
• ✅ intensive grinding ⭐

⭐ Slow start function

✅ After starting, the device gradually increases the rotational speed instead of immediately reaching maximum revolutions.

✅ This reduces the during take-off, facilitates reliable handling of the grinder and reduces the load on the transmission and motor.

⭐ Additional handle mounted on two sides

✅ The side handle can be mounted on the left or right side of the device.

✅ This allows you to comfortably adjust the setting for both right- and left-handed people and increases control when cutting and grinding from different angles.

⭐ 125 mm discs – the most popular size

➡ Support for discs with a diameter of 125 mm ensures very wide availability of accessories.

✅ You can easily use discs for:

• cutting steel ⭐
• aluminium cutting ⭐
• cutting of paving stones ⭐
• Metal grinding ⭐
• Rust removal ⭐
• Weld cleaning ⭐
• concrete and stone processing ⭐

✅ Thread M14

➡ The standard M14 thread guarantees compatibility with a huge number of discs and accessories available on the market.

➡ There is no need to look for dedicated accessories – popular solutions used in most angle grinders fit.

➡ Working without cable

⭐ Cordless power supply gives full freedom of operation where access to the electricity network is difficult.

➡ The grinder is perfect for:

• ✅ roofing works
• ✅ fence assembly
• ✅ construction of steel structures
• ✅ renovation works
• ✅ cutting elements on scaffolding
• ✅ work in the garage and workshop
• ✅ processing of materials outside the building

⭐ No cable means more convenience, easier maneuverability and faster organization of the workstation.

➡ Contents of the set

✅ Cordless angle grinder

✅ 2 Li-Ion 21V 4.0 Ah batteries

✅ Charger

✅ Disc cover

✅ Side grip

✅ Key for disc replacement

✅ Operating instructions

➡ The set includes 2 21V batteries with a capacity of 4000mAh

➡ A fast charger is included with the batteries

➡ Key to disc replacement

➡ The whole was packed in a handy suitcase, for a grinder and accessories

Specifications