Piegādes termiņš visā Lietuvā: 5-7 darba dienas.
Piegādes cena uz norādīto adresi: 3 eiro
Apraksts
Trumpai apie prekę
Prekė: Keitiklis-įkroviklis su paleidimo akumuliatoriaus įkrovimo funkcija, 12V/24V, 80A. Kategorija: Baterijų įkrovikliai.
- Gamintojas: Verke
- Modelis: V80013
The rectifier is a device that allows charging various types of lead-acid batteries: WET - with electrolyte in liquid form, GEL - with electrolyte in gel form, AGM - with electrolyte absorbing mat. In addition, the device supports the start-up of internal combustion engines. The rectifier converts the current and voltage present in the power grid into those that allow you to safely charge the battery. Thanks to charging, it is easier to ensure proper operation of the battery, which significantly extends the life of the battery.
TECHNICAL DATA:
- model: V80013 (VP-600I)
- power supply voltage: 230 V
- network frequency: 50 V
- rated charging voltage: 12/24
- Charging current: 5-80 A
- starting current (3/120 s - 3 seconds of operation and 120 seconds of break for up to 5 cycles: 600 A
- Battery capacity: 25-800 Ah
- Working temperature: - 40 ̊C ...+ 60 ̊C
- degree of protection: IP20
- protection class: I
- weight: 5 kg
The VP-600I rectifier with charging function and start-up assistance is a professional device for charging and starting batteries with a voltage of 12V / 24V and battery capacity from 25Ah to 800Ah
✅ Very light and handy, easy to use!!!
⭐ Advantages of the device:
- Charging wet batteries
- Smooth charging current adjustment.
- Small dimensions and weight,
- Has a cooling system,
⭐ The rectifier automatically selects the motor's demand for electricity and not, as in the case of transformer devices that rigidly provide the current set by the user, which makes it safe for batteries.
⭐ When the start function is switched on, the device waits for the power consumption - we do not have to rush to break the neck to the cabin to start the car, only after turning the key, the start gives more current needed to start the engine.
⭐ This solution is safe due to the stabilisation of the output voltage. Dedicated to buses and passenger cars.
The VERKE inverter rectifier provides the possibility of effective and efficient charging and starting of batteries both 12V and 24V.
Simple and intuitive control panel
The VERKE inverter rectifier is equipped with an extremely simple and transparent control panel with LED display, signaling diodes and potentiometer.
- Selectable load (loading) / start (boot) mode ⭐
- Selectable voltage 12V / 24V ⭐
- Ability to adjust the current with a potentiometer ⭐
Advanced technology and powerful integrated circuits were created to achieve the greatest possible efficiency and reliability of the device.
Dedicated cooling
High performance requires dedicated solutions
The VERKE inverter rectifier has been equipped with a fan mounted on the rear housing to ensure optimal operating temperature. After turning off the rectifier, the fan still works cooling the systems inside the housing.
ON/OFF switch with signaling diode
ATTENTION! After restarting, the rectifier always turns on in 12V mode even if it was previously set to charge or start 24V.
➡ MODERNITY - the device uses modern transistors, a solution that provides a minimum of electromagnetic interference small power losses in basic systems, enabling increased efficiency and reliability of the power source.
➡ WEIGHT AND DIMENSIONS - the device is very small and mobile. It is 6 times smaller and 10 times lighter than previous transformer starts. Due to the fact that it is an inverter device, the current consumption is much lower than in transformer devices.
➡ CONTROL PANEL - The rectifier is equipped with a clear and easy-to-use control panel. This makes it easier to work and control the charging or starting process.
➡ START - in addition to charging, the device gives the possibility of starting. Changing the mode is very simple - just press the appropriate button.
➡ RELIABLE WIRES - the rectifier uses wires of solid construction and high reliability, guaranteeing an excellent result of the work performed.
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With a VAT invoice |
| Parametry | Model | V80013 |
| Parametry | Brand | Verke |
| Parametry | Maximum amperage | 80 A |
| Parametry | Product weight with unit packaging | 5 kg |
| Parametry | EAN (GTIN) | 5904673571513 |