Kopėčių rankenos IKEA KURA lovai, SUPPI, 2 vnt., PETG

Trumpai apie prekę

Prekė: Kopėčių rankenos IKEA KURA lovai, SUPPI, 2 vnt., PETG. Kategorija: Medinės lovytės.

• Gamintojas: I love KURA
• Modelis: I love KURA
• Ilgis: 18 cm
• Spalva: black

A set of 2 SUPPI upper handles for the IKEA KURA 90 × 200 cm bed without roof structure.

Handles are mounted on both sides of the entrance to the upper level of the bed. They create additional space for the hand and fingers when climbing and descending the ladder.

✅ WHAT DO YOU GET?

✔ 2 × SUPPI TOP handle – one for each side of the entrance

✔ Assembly elements

The offer includes a set of two handles. The bed and other furnishings shown in the pictures are not part of the set.

✅ THE MOST IMPORTANT INFORMATION

Model: SUPPI TOP

Compatibility: IKEA KURA 90 × 200 cm

Version: for a bed without a roof installed

Number of handles: 2 pcs.

Assembly location: upper part of the bed entrance

Material: PETG

Execution technology: 3D printing

Color: black

Height of one handle: approx. 18 cm

One handle width: approx. 10 cm

Depth of one handle: approx. 2 cm

✅ There is little room for fingers at the top of the ladder

In the standard IKEA KURA design, the child grabs directly behind the wooden elements of the bed when climbing the upper level.

At the top of the entrance there is little space for free positioning of hands and fingers.

✅ SUPPI creates a separate place for hands

After installing SUPPI over wooden posts, two additional places to grab are created.

The space between the handle and the bed design allows you to comfortably position your fingers and embrace the handle with your hand.

✅ Two handles – one on each side of the entrance

The SUPPI TOP set consists of two handles mounted on both sides of the entrance to the upper level.

Thanks to this, the child receives additional grip points for both hands during the last stage of climbing and starting to descend the ladder.

✅ The handle can be covered with the whole hand

The SUPPI shape provides space between the wooden post and the handle.

The child does not have to rest his fingers solely on the edge of the wooden element – he can cover SUPPI with his hand and use the handle as an additional support point.

One SUPPI TOP handle:

1. Height: approx. 18 cm
2. depth: approx. 2 cm

Due to the technology of execution, slight dimensional differences are possible.

✅ Tailored to IKEA KURA design

SUPPI TOP are designed for the upper elements of the IKEA KURA bed entrance.

Handles cover the top of the wooden posts and are attached directly to the structure.

This offer is for a version designed for the original IKEA KURA bed without a roof structure installed.

✅ Made from PETG

SUPPI is made by 3D printing from PETG.

PETG is characterized by good mechanical strength and greater temperature resistance than the PLA material popular in 3D printing, which is why we chose them to make a utility element mounted at the ladder.

3D printing technology means that delicate lines of subsequent layers of material can be visible on the surface of the product. This is a natural feature of this technology and is not a defect of the product.

✅ You know exactly which version you are buying

This offer includes:

SUPPI TOP – 2 top handles for IKEA KURA without roof.

Before buying, check the design of your bed and the place of assembly shown in the photos of the offer.

Handles are mounted directly to the wooden structure of the bed.

Assembly should be done by an adult.

After installation, check the stability of both handles. During use, periodically check the condition of the product and the fastening of screws and tighten them if necessary.

• clean with a soft, slightly damp cloth
• do not use aggressive cleaning agents or solvents
• do not wash in the dishwasher
• do not expose to open fire or intense heat sources

1. Do SUPPI fit IKEA KURA?

No. SUPPI was designed with the IKEA KURA bed in mind, but it can also be used in most other wooden beds with beams with a cross section of at least 35 × 35 mm, as long as the design of the bed allows for proper and stable installation of handles.

2. How many handles are included?

The offer includes a set of 2 SUPPI TOP handles – one for each side of the entrance.

3. Where is SUPPI installed?

The handles are mounted at the top of two vertical elements located on both sides of the entrance to the upper level of the bed. The exact place of installation is shown in the photos of the offer.

4. Why mount additional handles?

In the standard KURA design, there is little space left at the top of the entrance for free positioning of the fingers. SUPPIs create additional places that the child can cover with his hand when entering and descending.

5. What are the handles made of?

SUPPI are made of PETG by 3D printing.

6. Are the lines visible on the surface of the handle a defect?

No. Gently visible layers are a natural effect of 3D printing technology.

7. Is the IKEA KURA bed included?

No. The offer applies only to a set of SUPPI TOP handles with mounting elements indicated in the section “What do you get? ”. The bed and equipment shown in the pictures are used to present the product.

SUPPI is an accessory compatible with the IKEA KURA bed.

The product is not an IKEA product and is not manufactured or distributed by IKEA.

The IKEA KURA name was used solely for the purpose of unambiguously determining the purpose and compatibility of the product offered.

Specifications