Laidų ilgio matuoklis SCHNEIDER IMT23206 THORSMAN

Trumpai apie prekę

Prekė: Laidų ilgio matuoklis SCHNEIDER IMT23206 THORSMAN. Kategorija: Detektoriai.

• Gamintojas: Thorsman
• Modelis: IMT23206

Thorsman IMT23206 is designed to detect the course of various types of non-voltage cables. The device consists of a transmitter and a receiver. Under ideal conditions, the receiver operates at a distance of up to 30 cm from the tested cable. The operation of the device depends on factors such as the type of insulation, distance from other wires in the beam, etc. This is normal and applies to all cable mileage detection devices available on the market.

The transmitter includes four adapters for connecting to commonly used cables:

• RJ-11 plug
• Coaxial plug
• Two crocodile clamps
• Fuse plug for vehicles

Specification

• Product Range: Thorsman
• Product or Component Type: Multifunctional Wire Marker
• Power supply: Receiver 4 batteries 1,5 V 48 V
• Power Supply: Transmitter 2 Batteries 1,5V AAA
• Components of the device: Transmitter - for generating a specific tone
• Components of the device: Receiver - for sound reception
• Local signaling: LED for working status
• User Language: Spanish
• User Language: German
• User language: Polish
• User Language: Hungarian
• User Language: Portuguese
• User Language: French
• Height: 183 mm
• Width: 80 mm
• Depth: 46 mm
• Product weight: 220 g with battery

DETECTION OF ELECTRICAL WIRING

Warnings:

• Only wires that are not live should be detected.
• To avoid electric shock, do not allow your hands or skin to come into contact with live conductors.
• Before using the device for detecting the course of wires, always disconnect the power supply from the circuit.

Open the front cover of the transmitter and select the plug or clamp suitable for the detected cable. Fold the plug or clamp in such a way that its wire passes through the hole in the front cover (Fig. 1), then close the front cover. Connect the transmitter to the cable to be detected and press the WL/OFF button once to turn on the transmitter. By holding down the TEST button, bring the receiver closer to the transmitter to see if sound and visual signals are generated. This allows you to confirm that the receiver and transmitter are working properly. Wire waveform detection involves tracking the sound and visual signals generated by the receiver.

DETECTION OF THE COURSE OF TELEPHONE WIRES

To avoid interference, disconnect the home line from the main telephone service provider connection. To do this, you must first find the connection box used to connect the home line to the installation of the telephone service provider, and then disconnect all connections of the home installation to this box (remembering the places of connection of individual wires for their reconnection in the future). Insert the RJ-11 (telephone) plug into a standard telephone socket. Detect the course of the wire as described above.

In order to increase the signal power and operating range of the receiver, a black crocodile clamp can be connected to an external grounding point. This will increase the operating range of the receiver.

DETECTION OF COAXIAL CONDUCTORS

In order to avoid interference, disconnect the home cable from the cable service provider installation. This connection can be found in the place where the main wire is inserted into the building. Insert the coaxial plug into any coaxial socket located in the house. Detect the course of the wire as described above.

DETECTION OF THE COURSE OF CAR WIRES

Warning:

• Do not use on any component of the ignition system.
• Before using this device, check the electrical system of the vehicle and disconnect all components sensitive to voltage and current pulses, e.g. airbags, electronic control modules, etc. After the cable mileage detection is complete, all components must be properly connected back.

Specifications