Laistymo juosta su kompensacija, 100 m, 68, ruda

Trumpai apie prekę

Prekė: Laistymo juosta su kompensacija, 100 m, 68, ruda. Kategorija: Laistymo juostos.

• Gamintojas: Rivulis
• Modelis: 1455

Drip line with COMPENSATION 100 m + 68 elements + free

The high-quality Hydro PC pressure compensating drip line is a drip line with a built-in cylindrical dripper with flow control, which gives you the ability to water plants in a variety of conditions. Perfect for irrigation of plants grown in sloping areas and for use on long stretches. Hydro PC emitters regulate flow and maintain constant flow rates at different input pressures. Since Hydro PC has a large sectional maze and self-cleaning mechanism, its resistance to clogging is very high. With two holes per emitter, the Hydro PC delivers the right amount of water throughout the irrigated area. The Rivulis drip line is characterized by increased protection against UV rays and resistance to chemicals and fertilizers commonly used in irrigation of home gardens, commercial areas, as well as in irrigation of blueberries, raspberries, strawberries and many other field and greenhouse crops.

Total length: 5 cm

• Line Diameter: Ø16 mm
• Wall thickness: 40 miles = 1,02 mm
• Drip spacing: every 33 cm
• Outflow: 2,2 l/h from dripper
• Maximum thrust length while maintaining 90% irrigation uniformity: 120 m
• Maximum working pressure: 3,5 bar
• Minimum working pressure: 0,8 bar
• Closing pressure (ND) 0,1 bar
• Recommended filtration: 120 mesh (130 micron)
• Pressure compensation: yes
• Brown pipe, resistant to UV rays
• Producer: AQUALINE

What is pressure compensation used for?

Pressure compensation allows the laying of longer lines of drip lines due to the emitters of a special design ensuring an even flow of water along the entire length of the cable.

Where to use it?

It should be used where the irrigation area requires a thrust of more than 100 mb or where it is necessary to balance the doses of water along the entire length of the drip line.

The drip line with pressure compensation is perfect for irrigation of plantings and row crops, ensuring uniform plant growth regardless of the distance from the water source.

It is also used in areas with diverse sculptures and on slopes.

The drip line with pressure compensation ensures precise irrigation.

RASPBERRY

Raspberry are drought-sensitive plants and even short-term water shortages can affect the quality of raspberry fruit. Optimal hydration of raspberry will be achieved by choosing a drip line with an emitter capacity of 2l / h and a spacing of 33-50 cm. Drip lines should be arranged along rows of plants on the soil surface or at a depth of up to 10 cm.

AMERICAN BLUEBERRY

In order to ensure the proper growth and development of blueberries, it is necessary to provide bushes with adequate soil moisture. Even short-term drought can cause poor growth and yield of the plant. In Poland, due to the structure of soils and climate, additional irrigation of plantations is necessary. Proper selection of dripper spacing and drip tape performance is very important for optimizing irrigation: on light soils it is best to choose a line with an emitter spacing, every 33cm. On heavy soils, every 50cm. The optimal weekly dose of water for one blueberry bush should be in the range from 10-20 l.

STRAWBERRY

Strawberry is a drought-sensitive berry plant. Drying the soil results in a reduction in the weight of the fruit, affects the size of the crop and the formation of flower buds. Due to the climate, the strawberry irrigation system significantly increases the yield of the crop. In the case of strawberry cultivation, it is possible to surface and subsurface irrigation. The optimal distribution of emitters in the drip line is 33 cm. The undoubted advantages of drip line irrigation are the protection of leaves against wetting and the ability to carry out field work during the irrigation cycle.

VINE

Watering has a significant impact on the growth strength, yield and condition of plants. Due to its well-developed and extensive root system, vines are resistant to water shortages. Watering may be necessary in case of prolonged heat and on sandy soils. Particular attention should be paid to vines growing right next to buildings, because the ground in such places usually dries faster. Adequate humidity of the substrate is particularly important during the period of fruit formation. It should be remembered that the root system is not flooded for too long, because it limits the air content in the soil and additionally creates conditions conducive to the development of soil pathogens.

TOMATO

Tomato is the most popular vegetable in the world. With the help of modern irrigation technology, growing a tomato can even be year-round. The greatest demand for water tomatoes have during the flowering, tying and growth period of fruits. In tomato irrigation systems, you should avoid watering plants from above. The most effective way to water a tomato is to use a drip irrigation system.

CUCUMBER

Cucumber is one of the most sensitive plants to water deficiency, due to the shallowly placed root system and the relatively large transpiration surface of the leaves. Irrigation of the plant should begin during the flowering and growth period, and before sowing, it is recommended to thoroughly wet the soil. The plant is particularly sensitive to precipitation from above. Extremely good results are brought by the use of a drip system for irrigation of cucumbers. The use of drip lines reduces the risk of plant paralysis with fungal diseases and eliminates the problem of inadequate water temperature. The system allows for precise feeding of media with water in the development phase.

DRIP LINE ACCESSORIES:

PINS - 40 PIECES

• Designed for fixing drip lines
• Very durable material, resistant to external factors
• Overall length 14,5 cm, wide handle
• Pin profile provides stable holding of wires
• Very simple and convenient installation
• Ideal for all types of irrigation systems

PUSH-IN TEES - 7 PIECES

• Push-in tee is used to connect drip line or PE pipes 16mm in automatic irrigation systems
• Made from high-quality plastic
• Very sturdy and easy to assemble
• Resistant to UV radiation

PUSH-IN KNEE - 7 PIECES

• Elbow is used to connect drip line or PE pipes 16mm in automatic irrigation systems
• Push-in elbow made of high quality plastic
• Very sturdy and easy to assemble
• Resistant to UV radiation

PUSH-IN STRAIGHT FITTING - 7 PIECES

• Push-in coupling is used to connect drip line or PE pipes 16mm in automatic irrigation systems
• Made from high-quality plastic
• Very sturdy and easy to assemble
• Resistant to UV radiation

PUSH-IN STOPPER - 7 PIECES

• Cork is used to permanently or temporarily blind the tip of the drip line section
• Made from high-quality plastic
• Very sturdy and easy to assemble
• Resistant to UV radiation

FREE TO DRIP LINE - CONNECTION SET LINE - HOSE

Connection kit between drip line and garden hose.

The set includes:

Valve line - GZ 3/4", hose plug 16mm + connection (adapter) with internal thread 3/4" for sprinklers, guns and many other gardening equipment.

Specifications