Laistymo žarna PE 32mm, PN6, 100m, be skylučių

Trumpai apie prekę

Prekė: Laistymo žarna PE 32mm, PN6, 100m, be skylučių. Kategorija: Laistymo juostos.

• Gamintojas: Watermil
• Modelis: WAZ32000_50m

Irrigation mounting pipe is a reliable product designed for efficient water supply in horticulture, agriculture and professional irrigation systems. Made of high quality polyethylene, it provides durability exceeding 50 years of use and convenience of use in all weather conditions.

✅TECHNICAL SPECIFICATION

• ➡ Material: Polyethylene (PE) high quality
• ➡ Outside diameter: 32 mm
• ➡ Wall thickness: 2,0 mm (reinforced construction)
• ➡ Nominal pressure: PN6 (6 bar)
• ➡ Length in coil: 100 meters
• ➡ Colour: Black (UV protection and algae growth)
• ➡ Operating temperature: from -60°C to +40°C
• ➡ Durability: more than 50 years of operation with proper installation
• ➡ Standards: compliance with the requirements for water supply systems

Advantages of Our PE Irrigation Pipe 32mm PN6 100m

✅ DURABLE PE PLASTIC - polyethylene material provides excellent resistance to mechanical damage and extreme weather conditions, does not crack even at temperatures up to -60°C

✅ UNIVERSAL APPLICATION - works perfectly in both ground and ground installations, ideal for micro-irrigation systems,

✅ SIMPLE INSTALLATION - the ability to quickly connect with other components using any type of installation fittings, easy and fast connection

✅ SMOOTH INNER SURFACE - minimizes flow resistance, increasing system efficiency and ensuring optimal water transport

✅ SYSTEM BUS - solid construction of the cable allows it to be used as the main water supply line in the entire irrigation system

✅ CORROSION RESISTANCE - construction resistant to corrosive agents contained in the soil, ensures long-term trouble-free operation

✅ HIGH FLEXIBILITY - excellent flexibility makes it easier to carry out installations on corners and difficult routes without the need for additional fittings

▶ WHAT IS THE PE MOUNTING PIPE USED FOR?

PE 32mm polyethylene pipe is the bus of your irrigation system - the main pipe that transports water from the source (hydrophore, well, tap) to individual watering zones. This is the foundation of any professional irrigation system to which you connect:

• Drip lines
• Sprinklers and rain showers
• Microsprayers
• Electromagnetic valves
• Filters and pressure regulators

The PE pipe is the skeleton of the irrigation system. You lay it in the ground (depth 30-40 cm) or on the surface, forming a distribution network. Thanks to a wide range of fittings (trailers, elbows, fittings), you can freely branch the installation and bring water wherever it is needed - from small home gardens, through orchards and farmlands, to extensive golf courses.

How is it different from a regular pipe?

PE mounting pipe is not an ordinary garden pipe - it is an element of the water supply system with pressure parameters (PN6 = strength up to 6 bar), which you can safely bury and forget for decades. It is much thicker and more durable than drip lines or garden hoses. Thanks to its flexibility and high impact strength, does not crack under the influence of impacts or extreme temperatures.

1 Is the pipe resistant to UV radiation? Yes, black PE plastic exhibits high resistance to UV radiation and prevents algae growth inside the duct.

2 Is the pipe suitable for drinking water? No, the product is designed only for use in irrigation and irrigation systems.

3 What fittings are compatible with this pipe? The pipe works with standard PE fittings with a diameter of 32 mm available in our store - tees, elbows, muffs, end caps.

4 Is it possible to cut the pipe into shorter sections? Yes, the pipe can be cut to any length without any problems using special PE pipe shears or a sharp knife.

5 Is the pipe resistant to low temperatures? Yes, the material retains flexibility and does not crack even at temperatures up to -60°C, however, it is recommended to empty the installation from the water before winter.

Specifications